Description
-
Model List:
- D375A-6 Bull Dozer
- 1. Preface
- 2. CONTENTS
- 3. Specifications
- 4. Precautions for field assembly
- 5. Disposal of removed parts
- 6. Assembly procedure, necessary equipment, and schedule
- 7. Layout of kit
- 8. Style for transportation
- 9. Table of tools for field assembly
- 10. Tightening torque
- 11. Coating materials list
- 12. Selection of wire ropes used for assembly
- 13. Assembly
- 13.1. A1 Installation of chassis
- 13.2. A2 Installation of undercover
- 13.3. A3 Installation of pivot shaft
- 13.4. A4 Installation of undercarriage
- 13.5. A5 Adding oil to recoil chamber and pivot chamber
- 13.6. A6.1 Installation of engine air inlet hood
- 13.7. A6.2 Installation of engine air precleaner (if equipped)
- 13.8. A7 Installing direction of exhaust pipe
- 13.9. A8 Installation of blade lift cylinder
- 13.10. A9 Installation of ripper
- 13.11. A10 Installation of track
- 13.12. A11 Assembly of blade
- 13.13. A12 Installation of blade
- 13.14. A13 Installation of operators cab
- 13.15. A14 Installation of rear monitor camera (if equipped)
- 13.16. A15 Installation of additional cab lights (if equipped)
- 13.17. A16 Installation of ROPS
- 13.18. A17 Installation of VHMS, ORBCOMM antenna
- 13.19. A18 Installation of revolving warning lamp to top of ROPS (if equipped)
- 13.20. A19 Check track tension
- 13.21. A20 Check fuel, coolant and lubricants
- 13.22. A21 Bleeding air from hydraulic cylinders
- 13.23. A22 Lubricating
- 13.24. A23 Installation of fuel quick charge piping (if equipped)
- 14. Check and maintenance procedures after completion of assembly
- 14.1. M1 Check and adjustment of operators cab
- 14.2. M2 Inspection of machine monitor
- 14.3. M3 Checking operation of dual tilt mechanism (If equipped)
- 14.4. M4 Setting procedure for USER ADJUST MODE
- 14.5. M5 Setting procedure for maximum cooling fan speed
- 14.6. M6 Replacement of return filter (Replacement of standard filter > special flushing parts)
- 14.7. M7 Flushing of hydraulic circuit, and bleeding air from hydraulic cylinders (Part 1)
- 14.8. M8 Replacement of return filter (Replacement of special flushing parts > standard filter)
- 14.9. M9 Bleeding air from hydraulic cylinders (Part 2)
- 15. APPENDIX 1. Installation procedure for spill guard (Installation by welding)
- 16. APPENDIX 2. Precautions for initialization procedures for VHMS controller
- 17. Field assembly inspection report
There are no reviews yet.