Description
-
Model List:
- PC200-6 Hydraulic Excavator
- PC200LC-6 Hydraulic Excavator
- PC210LC-6 Hydraulic Excavator
- PC220LC-6 Hydraulic Excavator
- PC250LC-6 Hydraulic Excavator
- 1. MAIN MENU
- 2. COVER
- 3. FORWARD
- 4. SAFETY INFORMATION
- 5. INTRODUCTION
- 5.1. INTENDED USE
- 5.2. FEATURES
- 5.3. BREAKING IN A NEW MACHINE
- 6. LOCATION OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 6.1. MACHINE SERIAL NO. PLATE POSITION
- 6.2. ENGINE SERIAL NO. PLATE POSITION
- 6.3. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 7. CONTENTS
- 8. GENERAL PRECAUTIONS
- 9. PRECAUTIONS DURING OPERATIONS
- 9.1. BEFORE STARTING ENGINE
- 9.2. OPERATING MACHINE
- 9.3. TRANSPORTATION
- 9.4. BATTERY
- 9.5. TOWING
- 9.6. BUCKET WITH HOOK
- 10. PRECAUTIONS FOR MAINTENANCE
- 10.1. BEFORE CARRYING OUT MAINTENANCE
- 10.2. DURING MAINTENANCE
- 11. POSITION FOR ATTACHING SAFETY LABELS
- 12. GENERAL VIEW
- 12.1. GENERAL VIEW OF MACHINE
- 12.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 13. EXPLANATION OF COMPONENTS
- 13.1. MACHINE MONITOR
- 13.2. SWITCHES
- 13.3. CONTROL LEVERS, PEDALS
- 13.4. CEILING WINDOW
- 13.5. FRONT WINDOW
- 13.6. DOOR LOCK
- 13.7. CAP, COVER WITH LOCK
- 13.8. HOT/COOL BOX
- 13.9. LUGGAGE BOX
- 13.10. ASHTRAY
- 13.11. CAB HEATER
- 13.12. CAR RADIO
- 13.13. FUSE
- 13.14. FUSIBLE LINK
- 13.15. CONTROLLER
- 13.16. TOOL BOX
- 13.17. GREASE PUMP HOLDER
- 13.18. HANDLING ACCUMULATOR
- 14. OPERATION
- 14.1. CHECK BEFORE STARTING ENGINE
- 14.2. STARTING ENGINE
- 14.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
- 14.4. MOVING MACHINE
- 14.5. STEERING MACHINE
- 14.6. STOPPING MACHINE
- 14.7. SWINGING
- 14.8. OPERATION OF WORK EQUIPMENT
- 14.9. HANDLING ACTIVE MODE
- 14.10. WORKING MODE SELECTION
- 14.11. PROHIBITIONS FOR OPERATION
- 14.12. PRECAUTIONS FOR OPERATION
- 14.13. PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
- 14.14. HOW TO ESCAPE FROM MUD
- 14.15. WORK POSSIBLE USING HYDRAULIC EXCAVATOR
- 14.16. REPLACEMENT AND INVERSION OF BUCKET
- 14.17. PARKING MACHINE
- 14.18. CHECK AFTER FINISHING WORK
- 14.19. STOPPING ENGINE
- 14.20. CHECK AFTER STOPPING ENGINE
- 14.21. LOCKING AND SECURING MACHINE
- 15. TRANSPORTATION
- 15.1. LOADING, UNLOADING WORK
- 15.2. PRECAUTIONS FOR LOADING
- 15.3. PRECAUTIONS FOR TRANSPORTATION
- 16. COLD WEATHER OPERATION
- 16.1. PRECAUTIONS FOR LOW TEMPERATURE
- 16.2. PRECAUTIONS AFTER COMPLETION OF WORK
- 16.3. AFTER COLD WEATHER
- 17. LONGTERM STORAGE
- 17.1. BEFORE STORAGE
- 17.2. DURING STORAGE
- 17.3. AFTER STORAGE
- 17.4. STARTING MACHINE AFTER LONGTERM STORAGE
- 18. TROUBLESHOOTING
- 18.1. PHENOMENA THAT ARE NOT FAILURES
- 18.2. METHOD OF TOWING MACHINE
- 18.3. METHOD FOR USING LIGHTWEIGHT TOWING HOLE
- 18.4. PRECAUTIONS ON PARTICULAR JOBSITES
- 18.5. IF BATTERY IS DISCHARGED
- 18.6. OTHER TROUBLE
- 19. GUIDES TO MAINTENANCE
- 20. OUTLINES OF SERVICE
- 20.1. OUTLINE OF OIL, FUEL, COOLANT
- 20.2. OUTLINE OF ELECTRICAL SYSTEM
- 20.3. OUTLINE OF HYDRAULIC SYSTEM
- 21. WEAR PARTS LIST
- 22. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 22.1. ENGINE OIL SPECIFICATION
- 22.2. DIESEL FUEL SPECIFICATIONS
- 23. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 23.1. INTRODUCTION OF NECESSARY TOOLS
- 23.2. TORQUE LIST
- 24. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 25. MAINTENANCE SCHEDULE CHART
- 25.1. MAINTENANCE SCHEDULE CHART
- 25.2. MAINTENANCE INTERVAL WHEN USING HYDRAULIC BREAKER
- 26. SERVICE PROCEDURE
- 26.1. INITIAL 250 HOURS SERVICE
- 26.2. WHEN REQUIRED
- 26.3. CHECK BEFORE STARTING
- 26.4. EVERY 100 HOURS SERVICE
- 26.5. EVERY 250 HOURS SERVICE
- 26.6. EVERY 500 HOURS SERVICE
- 26.7. EVERY 1000 HOURS SERVICE
- 26.8. EVERY 2000 HOURS SERVICE
- 26.9. EVERY 4000 HOURS SERVICE
- 26.10. EVERY 5000 HOURS SERVICE
- 27. SPECIFICATIONS
- 28. GENERAL PRECAUTIONS
- 28.1. PRECAUTIONS RELATED TO SAFETY
- 28.2. PRECAUTIONS WHEN INSTALLING ATTACHMENTS
- 29. HANDLING BUCKET WITH HOOK
- 29.1. CHECK FOR DAMAGE TO BUCKET WITH HOOK
- 29.2. PROHIBITED OPERATIONS
- 29.3. PRECAUTIONS DURING OPERATIONS
- 30. HANDLING AIR CONDITIONER
- 30.1. GENERAL LOCATIONS ON CONTROL PANEL
- 30.2. PRECAUTIONS WHEN USING AIR CONDITIONER
- 31. MACHINES READY FOR ATTACHMENTS
- 31.1. EXPLANATION OF COMPONENTS
- 31.2. HYDRAULIC CIRCUIT
- 31.3. ATTACHMENT MOUNTING/DISMOUNTING PROCEDURE
- 31.4. OPERATION
- 31.5. LONGTERM STORAGE
- 31.6. SPECIFICATIONS
- 32. INTRODUCTION OF ATTACHMENTS
- 32.1. BUCKET SELECTION
- 32.2. BUCKET INSTALLATION COMBINATIONS
- 32.3. SELECTION OF TRACK SHOES
- 32.4. BACKHOE CONTROL PATTERN CONVERSION
- 33. EXTENDING MACHINE SERVICE LIFE
- 33.1. HYDRAULIC BREAKER
- 33.2. CRUSHER
- 33.3. GRAPPLE
- 33.4. BUCKET WITH THUMB GRAPPLE
- 33.5. ROTATING GRAPPLE
- 33.6. SHEAR
- 33.7. HYDRAULIC PILE DRIVER
Reviews
There are no reviews yet.