Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300
Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300 - Image 2
Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300 - Image 3
Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300 - Image 4
Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300 - Image 5

Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300

$30.00

  • Type Of Manual: Operation and Maintenance Manual
  • Manual ID: UENAM01300
  • Format: PDF
  • Size: 50.5MB
  • Number of Pages: 454
Category:

Description

  • Model List:

    • PC210LCi-11 Hydraulic Excavator
  • 1. FOREWORD
  • 1.1. BEFORE READING THIS MANUAL
  • 1.2. SAFETY INFORMATION
  • 1.3. INTRODUCTION
  • 1.3.1. intelligent Machine Control
  • 1.3.2. MAIN USE OF MACHINE
  • 1.3.3. DEMOLITION WORK
  • 1.4. AUTO TILT BUCKET SERIAL PLATE (IF EQUIPPED)
  • 1.5. DECLARATION OF CONFORMITY
  • 1.6. TABLE OF CONTENTS
  • 2. SAFETY
  • 2.1. SAFETY LABELS
  • 2.1.1. LOCATION OF SAFETY LABELS
  • 2.1.2. SAFETY LABELS
  • 2.2. PRECAUTIONS FOR OPERATION
  • 2.2.1. START ENGINE
  • 2.2.2. PRECAUTIONS RELATED TO CONTROL BOX
  • 2.2.3. PRECAUTIONS RELATED TO SEMIAUTO MODE
  • 2.2.4. PRECAUTIONS FOR TRANSPORTATION
  • 3. OPERATION
  • 3.1. GENERAL VIEW
  • 3.1.1. MACHINE EQUIPMENT NAME
  • 3.1.2. GENERAL VIEW OF CAB
  • 3.2. EXPLANATION OF COMPONENTS
  • 3.2.1. EXPLANATION OF MACHINE MONITOR EQUIPMENT
  • 3.2.2. SWITCH
  • 3.2.3. CONTROL LEVERS AND PEDALS
  • 3.2.4. INTELLIGENT MACHINE CONTROL SYSTEM
  • 3.2.5. OTHER EQUIPMENT
  • 3.3. MACHINE OPERATIONS AND CONTROLS
  • 3.3.1. CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
  • 3.3.2. METHOD FOR STARTING ENGINE
  • 3.3.3. HANDLING QUICK COUPLER PIN GRAB
  • 3.3.4. METHOD FOR STOPPING ENGINE
  • 3.3.5. PROHIBITED OPERATIONS
  • 3.3.6. METHOD FOR PARKING MACHINE
  • 3.3.7. METHOD FOR DISCONNECTING AND CONNECTING ELECTRICAL CONNECTION AT AUTO TILT BUCKET
  • 3.3.8. METHOD FOR CONNECTING AND DISCONNECTING ELECTRICAL CONNECTION ON WORK EQUIPMENT FOR AUTO TILT BUCKET
  • 3.4. HANDLING RADIO
  • 3.5. TRANSPORTATION
  • 3.5.1. REMOVE AND INSTALL GNSS ANTENNA
  • 3.5.2. REMOVE AND INSTALL HANDRAIL
  • 3.5.3. REMOVE AND INSTALL GNSS ANTENNA AND ANTENNA FOR NETWORK MODEM
  • 3.6. PRECAUTIONS FOR LONGTERM STORAGE
  • 3.6.1. STARTING MACHINE AFTER LONGTERM STORAGE
  • 3.7. TROUBLES AND ACTIONS
  • 3.7.1. IF ERROR INFORMATION IS DISPLAYED ON CONTROL BOX
  • 3.7.2. OTHER TROUBLE
  • 4. MAINTENANCE
  • 4.1. MAINTENANCE SCHEDULE
  • 4.1.1. MAINTENANCE SCHEDULE TABLE
  • 4.2. MAINTENANCE PROCEDURE
  • 4.2.1. MAINTENANCE INTERVAL FOR AUTO TILT BUCKET
  • 4.2.2. EVERY 500 HOURS MAINTENANCE
  • 5. SPECIFICATIONS
  • 5.1. SPECIFICATIONS
  • 5.1.1. SPECIFICATIONSPC210LCi11
  • 6. ATTACHMENTS AND OPTIONS
  • 6.1. PRECAUTIONS FOR USING ATTACHMENT AND OPTIONS
  • 6.1.1. PRECAUTIONS WHEN SELECTING
  • 6.1.2. READ THE OPERATION AND MAINTENANCE MANUAL THOROUGHLY
  • 6.1.3. PRECAUTIONS WHEN REMOVING AND INSTALLING
  • 6.1.4. PRECAUTIONS FOR USING
  • 6.2. ATTACHMENTS AND OPTIONS
  • 6.2.1. AUTO TILT BUCKET
  • 6.3. RECOMMENDED ATTACHMENT OPERATIONS
  • 6.3.1. HYDRAULIC BREAKER
  • 6.4. KomVision
  • 6.4.1. PRECAUTIONS WHEN USING KomVision
  • 6.4.2. MACHINE MONITOR EQUIPMENT NAME
  • 6.4.3. EXPLANATION OF MACHINE MONITOR EQUIPMENT
  • 6.4.4. WARNING DISPLAY
  • 6.4.5. CAMERA SYSTEM CAUTION LAMP
  • 6.4.6. CAMERA CONTROLLER CAUTION LAMP
  • 6.4.7. MONITOR DISPLAY
  • 6.4.8. MONITOR DISPLAY SELECTOR SWITCH
  • 6.4.9. CAMERA IMAGE SELECTOR SWITCH
  • 6.4.10. METHOD FOR CHECKING BEFORE STARTING
  • 6.4.11. METHOD FOR CHECKING CAMERA VISIBILITY
  • 6.4.12. TROUBLES AND ACTIONS
  • 7. SETTING
  • 7.1. INTELLIGENT MACHINE CONTROL SETTINGS
  • 7.2. CONTROL BOX
  • 7.2.1. METHOD FOR DISPLAYING MAIN MENU
  • 7.3. MACHINE MONITOR
  • 7.3.1. MACHINE SETTINGS
  • 7.3.2. MC SETTING
  • 8. EXECUTIONS
  • 8.1. SEMIAUTO MODE
  • 8.1.1. PRECAUTIONS FOR OPERATION
  • 8.1.2. PRECAUTIONS FOR REPLACING PARTS AND FAILURES
  • 8.1.3. WORKING MODE
  • 8.1.4. WORKING MODE (WHEN AUTO TILT BUCKET IS EQUIPPED)
  • 8.1.5. SEMIAUTO MODE SETTINGS
  • 8.2. TRAVEL MODE
  • 8.2.1. TRAVEL MODE SETTINGS
  • 8.2.2. DISPLAY OF TRAVEL MODE
  • 8.2.3. OFFSET MENU OF SURFACE
  • 8.2.4. TEMPORARY DESIGN MENU
  • 8.2.5. TARGET SURFACE SETTINGS
  • 8.3. ROUGH DIGGING MODE
  • 8.3.1. METHOD FOR SETTING ROUGH DIGGING SCREEN
  • 8.4. FINE DIGGING MODE
  • 8.4.1. METHOD FOR SETTING FINE DIGGING MODE SCREEN
  • 8.5. TARGET SURFACE SETTINGS
  • 8.5.1. TARGET SURFACE SETTING MENU
  • 8.5.2. METHOD FOR SETTING TARGET SURFACE
  • 8.6. BUCKET EDGE POSITION
  • 8.6.1. DISPLAY BUCKET EDGE POSITION
  • 8.6.2. METHOD FOR COMPARING WITH BENCHMARK
  • 8.6.3. METHOD FOR CORRECTING BUCKET EDGE POSITION
  • 8.7. DAILY CALIBRATION
  • 8.7.1. WALKAROUND CHECKS OF INTELLIGENT MACHINE CONTROL EQUIPMENT
  • 8.8. CHECK GNSS COMMUNICATION STATUS
  • 8.8.1. METHOD FOR CHECKING GNSS COMMUNICATION STATUS
  • 8.8.2. METHOD FOR CHECKING NUMBER OF SATELLITES AND ERROR OF POSITIONING
  • 8.8.3. METHOD FOR DISPLAYING BUCKET EDGE COORDINATES
  • 8.8.4. METHOD FOR SETTING SATELLITE POSITION DISPLAY AND ELEVATION ANGLE
  • 8.8.5. METHOD FOR DISPLAYING GNSS RECEIVER INFORMATION
  • 8.8.6. METHOD FOR CHECKING EXPECTANCY OF EDGE ACCURANCY
  • 8.8.7. METHOD FOR SETTING GLONASS SATELLITE
  • 8.8.8. METHOD FOR SETTING TILT SENSOR
  • 8.9. USE OF TOPO SURVEY
  • 8.9.1. METHOD FOR PERFORMING TOPO SURVEY MANUALLY
  • 8.9.2. METHOD FOR PERFORMING AUTOTOPO SURVEY
  • 8.9.3. METHOD FOR CANCELING TOPOGRAPHIC SURVEYS
  • 8.10. TROUBLESHOOTING
  • 8.10.1. CONTROL BOX SCREEN DISPLAY
  • 8.10.2. SEMIAUTO MODE
  • 8.10.3. WORKING ACCURACY
  • 8.10.4. AUTO TILT BUCKET
  • 9. INDEX
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu PC210LCi-11 Hydraulic Excavator Operation and Maintenance Manual UENAM01300”

Your email address will not be published. Required fields are marked *

Related products