Komatsu PC360LC-10, PC390LC-10 Hydraulic Excavator Operation and Maintenance Manual CEAM025406

Description

• Model List:
  • PC360LC-10 Hydraulic Excavator
  • PC390LC-10 Hydraulic Excavator

• 1. Contents
• 2. INTRODUCTION
• 2.1. Foreword
• 2.2. Safety Alert Symbol and Signal Words
• 2.3. Basic Machine Introduction
• 2.4. Product Information
• 3. SAFETY
• 3.1. Safety Labels
• 3.1.1. Location of Safety Labels
• 3.2. General Precautions Common to Operation and Maintenance
• 3.2.1. Precautions Before Starting Operation
• 3.2.2. Preparations for Safe Operation
• 3.2.3. Fire and Explosion Prevention
• 3.2.4. Precautions When Getting On or Off the Machine
• 3.2.5. Precautions for Cab and Working Around Machine
• 3.3. Operation Precautions
• 3.3.1. Precautions at Jobsite
• 3.3.2. Precautions in Starting Engine
• 3.3.3. Precautions During Operation
• 3.3.4. Transportation Safety
• 3.3.5. Lifting Objects With Bucket
• 3.4. Maintenance Precautions
• 3.4.1. Precautions Before Inspection and Maintenance
• 3.4.2. Precautions During Inspection and Maintenance
• 4. OPERATION
• 4.1. Visual Overview of Machine
• 4.1.1. General Machine View
• 4.1.2. General View of Cab
• 4.1.3. Controls and Gauges
• 4.1.4. Machine Monitor Overview
• 4.2. Machine Monitor Components
• 4.2.1. Basic Operation of Machine Monitor
• 4.2.2. Warning Lamps
• 4.2.3. Pilot Display
• 4.2.4. Gauge and Meter Display
• 4.2.5. Monitor Switches
• 4.2.6. User Menu
• 4.3. Operator Cab Switches
• 4.4. Control Levers and Pedals
• 4.5. Air Conditioner Operations
• 4.5.1. Air Conditioner Control Switches and Sensor
• 4.5.2. Using A/C in Auto Mode
• 4.5.3. Using A/C in Manual Mode
• 4.5.4. Blowing Cold Air to Face, Warm Air to Feet
• 4.5.5. Using Defrost Mode
• 4.6. Radio Operations
• 4.6.1. Radio Buttons and Display
• 4.6.2. Radio Setting and Adjusting
• 4.7. Auxiliary Electric Power
• 4.8. Fuses
• 4.9. Cab Windows
• 4.9.1. Opening and Closing Roof Window
• 4.9.2. Opening and Closing Windshield
• 4.10. Cab Door
• 4.11. Containers and Fire Extinguisher
• 4.12. Engine Hood
• 4.12.1. Opening Engine Hood
• 4.12.2. Closing Engine Hood
• 4.13. Caps and Covers with Lock
• 4.13.1. Open and Close Caps with Locks
• 4.13.2. Open and Close Covers with Locks
• 4.13.3. Lock and Unlock Engine Hood
• 4.13.4. Lock and Unlock the Cab Door
• 4.14. Battery Disconnect Switch
• 4.15. System Operating Lamp
• 4.16. Komatsu Diesel Particulate Filter (KDPF)
• 4.16.1. Manual Stationary Regeneration Procedure
• 4.16.2. KDPF Regeneration Disable Procedure
• 4.16.3. Canceling KDPF Regeneration Disable
• 4.17. Komatsu Closed Crankcase Ventilation (KCCV)
• 4.18. KOMTRAX
• 4.19. Daily Checks and Preparations Before Starting Engine
• 4.19.1. WalkAround Checks
• 4.19.2. Drain Water and Sediment from Fuel Tank
• 4.19.3. Drain Water and Sediment in Water Separator
• 4.19.4. Check and Add to Oil Level in Hydraulic Tank
• 4.19.5. Check and Add to Coolant Level
• 4.19.6. Check and Add to Oil in Engine Pan
• 4.19.7. Check Electrical Wiring
• 4.19.8. Check and Add to Fuel Level
• 4.19.9. Check Working Lamp Switch
• 4.19.10. Check Horn Function
• 4.19.11. Preparing to Use Operators Cab
• 4.20. Starting the Engine
• 4.20.1. Turbo Protect Function
• 4.21. Operations and Checks After Starting the Engine
• 4.21.1. Engine WarmUp
• 4.21.2. Hydraulic System WarmUp
• 4.22. Stopping the Engine
• 4.23. Moving and Steering Machine
• 4.23.1. Moving Machine Forward
• 4.23.2. Moving Machine Backwards
• 4.23.3. Stopping the Machine
• 4.23.4. Steering the Machine
• 4.23.5. Swinging the Machine
• 4.24. Operating Work Equipment
• 4.25. Working Mode
• 4.25.1. Operating the Working Mode Selector Switch
• 4.26. Prohibited Operations
• 4.27. Rules for Traveling
• 4.27.1. Traveling on Slopes
• 4.28. Recommended Applications
• 4.29. Replacing and Inverting Bucket
• 4.29.1. Replacing the Bucket
• 4.29.2. Inverting the Bucket
• 4.30. Parking Machine
• 4.31. After Finishing Work
• 4.31.1. Checks After Finishing Daily Work
• 4.31.2. Locking the Machine
• 4.32. Transporting the Machine
• 4.32.1. Loading and Unloading with Trailer
• 4.32.2. Lifting Machine
• 4.33. Spread and Narrow Track Frame Gauge
• 4.33.1. Narrowing Gauge
• 4.33.2. Spreading Gauge
• 4.34. Cold Weather Operation
• 4.35. LongTerm Storage of Machine
• 4.36. Common Phenomena That are Not Failures
• 4.37. Towing Machine
• 4.38. Towing with Machine
• 4.39. Disconnect and Charge Battery
• 4.40. Jumper Cables to Start Engine
• 4.40.1. Attaching Jumper Cables to Machine
• 4.40.2. Start Engine with Jumper Cables Attached
• 4.40.3. Disconnect Jumper Cables from Machine
• 4.41. Troubleshooting Common Troubles and Actions to Take
• 4.41.1. Error List Screen
• 5. MAINTENANCE
• 5.1. Rules for Maintenance
• 5.2. Outline of Service
• 5.2.1. Handling Oil, Fuel, Coolant, and Performing Oil Clinic
• 5.2.2. Handling Electrical Components
• 5.3. Consumable Parts
• 5.4. Safety Critical Parts
• 5.5. Torque Specifications
• 5.6. Recommended Fuel, Coolant, and Lubricant
• 5.7. Hydraulic Breaker Maintenance Interval
• 5.8. Maintenance Schedule
• 5.8.1. Maintenance Schedule Table
• 5.9. Maintenance Procedures
• 5.9.1. New Machine Maintenance
• 5.9.2. Air Cleaner Element Maintenance
• 5.9.3. Cooling System Cleaning
• 5.9.4. Track Shoe Bolts
• 5.9.5. Track Tension Inspection
• 5.9.6. Track Tension Increase
• 5.9.7. Track Tension Decrease
• 5.9.8. Vertical Pin Bucket Teeth Replacement
• 5.9.9. Horizontal Pin Bucket Teeth Replacement
• 5.9.10. Bucket Clearance Adjustment
• 5.9.11. Window Washer Fluid Level And Mixture Ratio
• 5.9.12. Air Conditioner Maintenance
• 5.9.13. Washable Cab Floor and Floor Mat
• 5.9.14. Setting Machine at Angle
• 5.9.15. Gas Spring Maintenance
• 5.9.16. Bleeding Air From Hydraulic System
• 5.10. Maintenance Every 50 Hours
• 5.10.1. Lubrication Every 50 Hours
• 5.11. Maintenance Every 250 Hours
• 5.11.1. Battery Electrolyte Level Check
• 5.11.2. Air Conditioner Compressor Belt Check and Tension Adjustment
• 5.12. Maintenance Every 500 Hours
• 5.12.1. Lubrication Every 500 Hours
• 5.12.2. Engine Oil and Filter Cartridge Replacement
• 5.12.3. Fuel Prefilter Cartridge Replacement
• 5.12.4. Swing Pinion Grease Level
• 5.12.5. Radiator, Cooler, and Condenser Fins Maintenance
• 5.12.6. Recirculated Filter and Fresh Air Filter Maintenance
• 5.12.7. Hydraulic Tank Breather Element Replacement
• 5.12.8. Hydraulic Tank Additional Breather Element Replacement
• 5.12.9. Swing Machinery Case Oil Level
• 5.12.10. Final Drive Case Oil Level
• 5.13. Maintenance Every 1000 Hours
• 5.13.1. Hydraulic Oil Filter Element Replacement
• 5.13.2. Swing Machinery Case Oil Change
• 5.13.3. Damper Case Oil Level
• 5.13.4. Fuel Main Filter Cartridge Replacement
• 5.14. Maintenance Every 2000 Hours
• 5.14.1. Final Drive Case Oil Change
• 5.14.2. Hydraulic Tank Strainer Cleaning
• 5.14.3. Accumulator Nitrogen Gas Pressure
• 5.14.4. KCCV Filter Element Replacement
• 5.15. Maintenance Every 4000 Hours
• 5.15.1. Water Pump Check
• 5.15.2. Vibration Damper Check
• 5.15.3. Accumulator Replacement (Control Circuit)
• 5.15.4. High Pressure Mounting Checks
• 5.15.5. Fuel Spray Prevention Cap Check
• 5.16. Maintenance Every 4500 Hours
• 5.17. Maintenance Every 5000 Hours
• 5.17.1. Hydraulic Tank Oil Change
• 5.18. Maintenance Every 8000 Hours
• 6. SPECIFICATIONS
• 6.1. Specifications PC360/390LC10
• 7. OPTIONS, ATTACHMENTS
• 7.1. General Attachment Safety Precautions
• 7.2. Machine Options
• 7.2.1. Straight Travel Pedal
• 7.2.2. Machine Control Pattern
• 7.3. Machine Attachments
• 7.3.1. Explanation of Attachment Components
• 7.3.2. Hydraulic Circuit
• 7.3.3. Attachment Guide
• 7.3.4. Attachment Operations
• 8. Index