Komatsu PC5500-11 Hydraulic Mining Excavator Operation and Maintenance Manual 15185-D-EN-11T2-P1-1.0

Description

• Model List:
  • PC5500-11 Hydraulic Mining Excavator

• 1. FOREWORD
• 1.1. BEFORE READING THIS MANUAL
• 1.2. EC DECLARATION OF CONFORMITY
• 1.3. PRIVACY POLICY ON EXCAVATORS EQUIPPED WITH excavator MONITORING SYSTEMS FOR THE EEA
• 1.4. RADIO WAVE REGULATIONS FOR KOMTRAX AND KOMTRAX PLUS
• 1.5. DIRECTIONS OF THE EXCAVATOR
• 1.6. SPECIFICATION AND SERIAL PLATE
• 1.7. DIVISION OF THE BINDER
• 1.8. DESIGNATED USE OF THE EXCAVATOR
• 1.9. DELIVERY OF THE EXCAVATOR
• 1.10. EXPLANATION OF ABBREVIATIONS
• 1.11. CONTENTS
• 2. SAFETY
• 2.1. SAFETY INFORMATION
• 2.2. OVERVIEW
• 2.3. SOUND PRESSURE AND VIBRATION LEVELS IN THE OPERATORS CAB.
• 2.4. GENERAL PRECAUTIONS COMMON TO OPERATION ON THE EXCAVATOR
• 2.5. PRECAUTION FOR MAINTENANCE
• 2.6. ADDITIONAL SAFETY INFORMATION FOR TROUBLESHOOTING AND ADJUSTMENTS
• 2.7. SPECIAL SAFETY EQUIPMENT
• 2.8. SAFETY WARNING SIGNS
• 3. OPERATION
• 3.1. FOREWORD
• 3.2. CONSTRUCTION OF THE EXCAVATOR
• 3.3. OPERATORS CAB CONTROLS
• 3.4. MACHINE MONITOR
• 3.5. OPERATING THE HEATER, VENTILATION AND AIR CONDITIONING
• 3.6. CAMERA SYSTEM WITH MONITORS
• 3.7. MACHINERY HOUSE
• 3.8. ELECTRICAL EQUIPMENT IN CAB BASE
• 3.9. PREHEATING SYSTEMS FOR OIL, COOLANT AND BATTERIES (WHEN EQUIPPED)
• 3.10. CHECKS BEFORE STARTING THE ENGINES
• 3.11. STARTING THE ENGINES
• 3.12. MOVING THE EXCAVATOR
• 3.13. SLEWING AND BRAKING THE SUPERSTRUCTURE
• 3.14. WORKING WITH THE ATTACHMENT
• 3.15. WORKING INSTRUCTIONS
• 3.16. PARKING THE Excavator
• 3.17. STOPPING THE ENGINES
• 3.18. OPERATION OF THE LUBRICATION SYSTEM
• 3.19. FIRE DETECTION AND SUPPRESSION SYSTEM
• 3.20. TRANSFER PUMP FOR HYDRAULIC OIL
• 3.21. CENTRAL REFILLING SYSTEM
• 3.22. SERVICE CRANE (SPECIAL EQUIPMENT)
• 3.23. WORK ON THE LOADER ATTACHMENT
• 3.24. TRANSPORTATION AND LIFTING OF THE EXCAVATOR
• 3.25. RETRIEVAL PROCEDURE
• 3.26. EXCAVATOR STORAGE
• 3.27. TROUBLE SHOOTING
• 4. MAINTENANCE
• 4.1. FOREWORD
• 4.2. PRECAUTIONS FOR MAINTENANCE
• 4.3. FILLING CAPACITIES
• 4.4. STANDARD TORQUE LIST
• 4.5. LUBRICATION AND MAINTENANCE SCHEDULE
• 4.6. SAFETY CRITICAL PARTS
• 4.7. EXTENDED SERVICE INTERVALS FOR ENGINES WITH ENGINE OIL MANAGEMENT SYSTEM
• 4.8. INITIAL SERVICING
• 4.9. WHEN NECESSARY
• 4.10. EVERY 10 OPERATING HOURS OR DAILY
• 4.11. EVERY 50 OPERATING HOURS OR WEEKLY
• 4.12. EVERY 250 OPERATING HOURS OR MONTHLY
• 4.13. EVERY 500 OPERATING HOURS OR QUARTERLY
• 4.14. EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH
• 4.15. EVERY 2000 OPERATING HOURS OR YEARLY
• 4.16. EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR
• 4.17. CRITICAL BOLT CONNECTIONS EVERY 3000 OPERATING HOURS
• 4.18. EVERY 6000 OPERATING HOURS OR ONCE A YEAR
• 4.19. FIRE PREVENTION
• 4.20. WELD REPAIRS