Komatsu PC5500 Hydraulic Mining Shovel General Assembly Procedure Manual PC5500ASrev4_09

Description

• Model List:
  • PC5500 Hydraulic Mining Shovel

• 1. Main Menu
• 2. Cover
• 3. Contents
• 4. Assembly of the Undercarriage (Z 24016a, Z 24018a)
• 5. Assembly
• 6. Assembly of the Cable Reel Unit (Z21885)
• 7. Assembly of the Superstructure Platform onto the Undercarriage (Z21886)
• 8. Assembly of the Prime Drive Unit to the Superstructure Platform (Z 21887)
• 9. a Mounting of the hydraulic access ladder (Z21136)
• 10. Assembly of the Boom Cylinders and the Stick Cylinder to the Boom (Z 21888a Z 21941, Z 21944)
• 11. Assembly of the Boom (Z21889a)
• 12. Assembly of the Counterweight (Z21891b)
• 13. Mounting of the Fuel Tank (Z 21892) or Main Switch Cabinet for Electrical Driven Unit
• 14. Mounting of the Cab Base (Z 21893)
• 15. Mounting of the Cab with Support Frame (Z 21894)
• 16. Mounting of the High Pressure Hoses (Z 21896) and the Hydraulic Oil Tank (Z 21897)
• 17. Mounting of the Hydraulic Oil Cooler (Z 21895)
• 18. Mounting of the Hand Rails, Cat Walks, Steps and the Grease Barrel Crane (Z 21901)
• 19. Mounting of Cable transfer to the Operators Cab (Z22937)
• 20. Installation of Hydraulic Hoses to the Attachment and Rotary Joint
• 21. Checking of direction motor rotation Z 22644a
• 22. Connection of Electric Cables
• 23. Filling the Hydraulic System (Z25026)
• 24. Prechecks prior Initial Startup
• 25. General
• 26. Only with Electric Drive
• 27. Initial Start up
• 28. Assembly of the Stick to the Boom Z 21890
• 29. Mounting of the Stick Cylinders to the Stick (Z 21903)
• 30. Assembly of the Bullclam Bucket to the Stick Z 21904
• 31. Mounting of the Pin Seals (Z 21906)
• 32. Putting the Lubrication System into operation (Z25022)
• 33. Checks and Adjustments Prior Commissioning
• 34. Metric standard thread
• 35. Metric fine thread