Komatsu PC60-6 Custom Hydraulic Excavator Operation and Maintenance Manual SEAM000400

Description

• Model List:
  • PC60-6 Custom Hydraulic Excavator

• 1. COVER
• 2. FOREWORD
• 3. EXPLANATION OF SYMBOLS
• 4. BREAKING IN YOUR NEW MACHINE
• 5. CONTENTS
• 6. GENERAL LOCATIONS AND SPECIFICATIONS
• 7. INSTRUMENTS AND CONTROLS
• 8. CHECK BEFORE STARTING
• 9. OPERATING YOUR MACHINE
• 10. CHANGING SWING RADIUS
• 11. INVERSION AND REPLACEMENT OF BUCKET
• 12. SELECTION OF TRACK SHOES
• 13. INSTALLATION OF OPTIONAL ELECTRICAL EQUIPMENT
• 14. COLD WEATHER OPERATION
• 15. PERIODIC MAINTENANCE
• 15.1. BLEEDING AIR FROM CIRCUIT
• 15.2. PERIODICAL REPLACEMENT OF SAFETY PARTS
• 15.3. MAINTENANCE TABLE
• 15.4. OIL FILLER AND LEVEL GAUGE POSITIONS
• 15.5. CHECK BEFORE STARTING
• 15.6. EVERY 50 HOURS SERVICE
• 15.7. EVERY 100 HOURS SERVICE
• 15.8. EVERY 250 HOURS SERVICE
• 15.9. EVERY 500 HOURS SERVICE
• 15.10. EVERY 1000 HOURS SERVICE
• 15.11. EVERY 2000 HOURS SERVICE
• 15.12. WHEN REQUIRED
• 16. ADJUSTMENT
• 17. TROUBLE SHOOTING GUIDE
• 18. SERVICE METER
• 19. MACHINE AND ENGINE SERIAL NUMBERS
• 20. FUEL,COOLANT AND LUBRICANTS
• 21. MACHINES READY FOR ATTACHMENTS
• 21.1. INSTRUMENTS AND CONTROLS
• 21.2. HYDRAULIC CIRCUIT
• 21.3. OPERATION
• 21.4. STORAGE
• 21.5. SPECIFICATIONS
• 22. SAFETY AND OPERATION
• 22.1. CONTENTS
• 22.2. SAFETY HINTS
• 22.3. POSITION FOR STICKING CAUTION AND NAME PLATES
• 22.4. RADIO
• 22.5. LOCKING CAP
• 22.6. EXCAVATORS WORK
• 22.7. HANDLING OF BATTERY
• 22.8. TRANSPORTATION
• 22.9. PRECAUTIONS FOR MAINTENANCE
• 22.10. STORAGE
• 22.11. COOLANT AND LUBRICANTS