Description
-
Model List:
- SK1020-5 Turbo Skid Steer Loader
- 1. MAIN MENU
- 2. COVER
- 3. FOREWORD
- 3.1. FOREWORD
- 3.2. INFORMATION ON SAFETY
- 3.3. INTRODUCTION
- 3.3.1. INTENDED USES
- 3.3.2. IMPROPER OR UNAUTHORIZED USES
- 3.3.3. MAIN CHARACTERISTICS
- 3.3.4. RUNNINGIN
- 3.4. PRODUCT IDENTIFICATION
- 3.4.1. MACHINE SERIAL NUMBER
- 3.4.2. MACHINE IDENTIFICATION PLATE AND PRODUCT IDENTIFICATION NUMBER (PIN)
- 3.4.3. ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
- 3.4.4. TRAVEL REDUCTION GEAR SERIAL NUMBER
- 3.4.5. CAB SERIAL NUMBER
- 3.4.6. BACKHOE IDENTIFICATION PLATE (if installed)
- 3.4.7. SERIAL NUMBERS AND DISTRIBUTORS ADDRESS
- 4. TABLE OF CONTENTS
- 5. SAFETY AND ACCIDENT PREVENTION
- 5.1. SAFETY AND WARNING DECALS
- 5.1.1. LOCATION OF THE SAFETY DECALS
- 5.1.2. LOCATION OF THE PICTOGRAM DECALS
- 5.1.3. PICTOGRAMS AND RELEVANT MEANINGS
- 5.1.4. VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
- 5.2. GENERAL PRECAUTIONS
- 5.2.1. GENERAL SAFETY RULES
- 5.2.2. SAFETY DEVICES AND GUARDS
- 5.2.3. CLOTHING AND PERSONAL PROTECTION ITEMS
- 5.2.4. UNAUTHORIZED MODIFICATIONS
- 5.2.5. LEAVING THE OPERATORS SEAT
- 5.2.6. GETTING ON AND OFF THE MACHINE
- 5.2.7. CHECKING THE REARVIEW MIRRORS (if installed)
- 5.2.8. PREVENTING FIRES DUE TO FUEL AND OIL
- 5.2.9. PREVENTING BURNS
- 5.2.10. PREVENTING DAMAGE DUE TO ASBESTOS POWDER
- 5.2.11. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
- 5.2.12. FIRE EXTINGUISHERS AND FIRST AID KIT
- 5.2.13. PRECAUTIONS CONCERNING THE CAB STRUCTURE
- 5.2.14. PRECAUTIONS CONCERNING THE EQUIPMENT
- 5.3. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
- 5.3.1. SAFETY ON THE WORK SITE
- 5.3.2. FIRE PREVENTION
- 5.3.3. PRECAUTIONS TO BE TAKEN FOR THE OPERATORS CAB
- 5.3.4. ROOM VENTILATION
- 5.3.5. PRECAUTIONS TO BE TAKEN FOR THE LIGHTS
- 5.3.6. CLEANING THE WINDOWS AND THE REARVIEW MIRRORS CHECKING THE WINDSHIELD WIPER BLADES (if installed)
- 5.4. PRECAUTIONS TO BE TAKEN WHEN WORKING
- 5.4.1. STARTING THE ENGINE
- 5.4.2. CHECKS FOR TRAVELING IN REVERSE
- 5.4.3. MOVING THE MACHINE
- 5.4.4. WORKING ON SLOPES
- 5.4.5. PREVENTING ELECTROCUTION
- 5.4.6. VISIBILITY
- 5.4.7. WORKING ON ICY OR SNOWCOVERED SURFACES
- 5.4.8. PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
- 5.4.9. WORKING ON LOOSE GROUND
- 5.4.10. PARKING THE MACHINE
- 5.5. TRANSPORTING THE MACHINE ON OTHER VEHICLES
- 5.5.1. LOADING AND UNLOADING THE MACHINE
- 5.5.2. THE ROUTE
- 5.6. BATTERY
- 5.6.1. SAFETY PRECAUTIONS FOR WORK ON BATTERIES
- 5.6.2. STARTING WITH BOOSTER CABLES
- 5.7. PRECAUTIONS FOR EMERGENCY RECOVERY
- 5.8. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
- 5.8.1. WARNING TAGS
- 5.8.2. TOOLS
- 5.8.3. PERSONNEL
- 5.8.4. EQUIPMENT
- 5.8.5. WORKING UNDER THE MACHINE
- 5.8.6. KEEPING THE MACHINE CLEAN
- 5.8.7. USE OF THE ENGINE DURING MAINTENANCE
- 5.8.8. PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY
- 5.8.9. STOP THE ENGINE BEFORE CARRYING OUT ANY MAINTENANCE OPERATION OR INSPECTION
- 5.8.10. RULES FOR REFUELING AND ADDING OIL
- 5.8.11. CHECKING THE COOLANT LEVEL IN THE RADIATOR
- 5.8.12. USING LAMPS
- 5.8.13. PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR
- 5.8.14. PRECAUTIONS CONCERNING THE STARTER
- 5.8.15. PRECAUTIONS CONCERNING HIGHPRESSURE HOSES
- 5.8.16. PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGHPRESSURE SYSTEMS
- 5.8.17. PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURES AND PRESSURES
- 5.8.18. COOLING FAN AND FAN BELT
- 5.8.19. WASTE MATERIALS
- 5.8.20. PRECAUTIONS TO BE TAKEN WHEN INFLATING THE TIRES
- 5.8.21. PRECAUTIONS TO BE TAKEN WHEN USING THE SYNTHETIC BIODEGRADABLE OIL TYPE HEES
- 6. THE MACHINE AND ITS OPERATIONS
- 6.1. SAFETY LOCKS
- 6.1.1. LOADER ARM SUPPORT
- 6.1.2. BACKHOE LOCKS (if installed)
- 6.1.3. COLD PLANER LOCKS (if installed)
- 6.2. GENERAL VIEWS
- 6.2.1. FRONT GENERAL VIEW
- 6.2.2. REAR GENERAL VIEW
- 6.2.3. CAB INSIDE GENERAL VIEW
- 6.3. INSTRUMENTS AND CONTROLS
- 6.3.1. INSTRUMENTS
- 6.3.2. INDICATOR LIGHTS
- 6.3.3. SWITCHES AND PUSH BUTTONS
- 6.3.4. ELECTRICAL ACCESSORIES
- 6.3.5. MACHINE CONTROLS
- 6.4. FUSES AND RELAYS
- 6.4.1. MACHINE FUNCTION FUSES
- 6.4.2. MAIN FUSE
- 6.4.3. RELAYS
- 6.5. GUARDS AND OPERATORS SEAT
- 6.5.1. ENGINE HOOD
- 6.5.2. REAR PANEL
- 6.5.4. STANDARD SEAT
- 6.5.5. CUSHIONED SEAT
- 6.5.6. SEAT BELT
- 6.5.7. EMERGENCY EXIT
- 6.5.8. TECHNICAL DOCUMENTATION CASE
- 6.5.9. FIRE EXTINGUISHER
- 6.5.10. FIRST AID KIT
- 6.6. USE OF THE MACHINE
- 6.6.1. CHECKS BEFORE STARTING THE ENGINE
- 6.6.2. STARTING THE ENGINE
- 6.6.3. WARMING THE ENGINE
- 6.6.4. HEATING THE HYDRAULIC OIL
- 6.6.5. HOW TO MOVE THE MACHINE (ISO PATTERN CONTROL SYSTEM)
- 6.6.6. HOW TO MOVE THE MACHINE (OPTIONAL PATTERN CONTROL SYSTEM)
- 6.6.7. MOVING ON SLOPES
- 6.6.8. MAXIMUM IMMERSION DEPTH
- 6.7. STOPPING THE ENGINE
- 6.8. PARKING THE MACHINE
- 6.8.1. PARKING ON LEVEL GROUND
- 6.8.2. PARKING ON SLOPES
- 6.9. TRANSPORTING THE MACHINE ON OTHER VEHICLES
- 6.9.1. LOADING AND UNLOADING THE MACHINE
- 6.9.2. TRANSPORT
- 6.10. HOW TO LIFT THE MACHINE
- 6.11. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
- 6.11.1. FUEL AND LUBRICANTS
- 6.11.2. COOLANT
- 6.11.3. BATTERY
- 6.11.4. OTHER PRECAUTIONS
- 6.11.5. PRECAUTIONS TO BE TAKEN AT THE END OF WORK
- 6.12. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON
- 6.13. USING THE WORK EQUIPMENT
- 6.13.1. LOWERING THE EQUIPMENT IN CASE OF MACHINE FAILURE
- 6.13.2. ORGANIZING THE WORK AREA
- 6.13.3. LOADING MATERIAL ON HEAPS AND ON LEVEL SURFACES
- 6.13.4. LOADING MATERIAL ON SLOPES
- 6.13.5. DIGGING METHOD
- 6.13.6. CHANGING THE BUCKET OR ATTACHMENT WITH STANDARD QUICK COUPLER
- 6.13.7. LONG PERIODS OF INACTIVITY
- 6.13.8. TROUBLESHOOTING
- 7. MAINTENANCE
- 7.1. GUIDE TO MAINTENANCE
- 7.2. MAINTENANCE NOTES
- 7.2.1. NOTES REGARDING THE ENGINE
- 7.2.2. NOTES REGARDING THE HYDRAULIC SYSTEM
- 7.2.3. NOTES REGARDING THE ELECTRICAL SYSTEM
- 7.2.4. NOTES REGARDING LUBRICATION
- 7.2.5. PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING
- 7.3. FUEL, COOLANT AND LUBRICANTS
- 7.3.1. APPROVED SYNTHETIC BIODEGRADABLE LUBRICANTS TYPE HEES
- 7.4. DRIVING TORQUES FOR SCREWS AND NUTS
- 7.4.1. STANDARD DRIVING TORQUES
- 7.4.2. SPECIFIC DRIVING TORQUES
- 7.5. LUBRICATION
- 7.5.1. LUBRICATION DIAGRAM
- 7.6. PERIODICAL CHANGE OF THE COMPONENTS CONNECTED WITH SAFETY
- 7.6.1. CRITICAL PARTS FOR SAFETY
- 7.7. MAINTENANCE PLAN
- 7.8. MAINTENANCE PROCEDURE
- 7.8.1. WHEN REQUIRED
- 7.8.2. CHECKS BEFORE STARTING
- 7.8.3. MAINTENANCE AFTER THE FIRST 50 HOURS OF OPERATION
- 7.8.4. MAINTENANCE EVERY 50 HOURS OF OPERATION
- 7.8.5. MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
- 7.8.6. MAINTENANCE EVERY 250 HOURS OF OPERATION
- 7.8.7. MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines filled with synthetic biodegradable oil type HEES)
- 7.8.8. MAINTENANCE EVERY 500 HOURS OF OPERATION
- 7.8.9. MAINTENANCE EVERY 1000 HOURS OF OPERATION
- 7.8.10. MAINTENANCE EVERY 2000 HOURS OF OPERATION
- 8. TECHNICAL SPECIFICATIONS
- 8.1. TECHNICAL DATA
- 8.1.1. STANDARD MACHINE OVERALL DIMENSIONS
- 8.1.2. MACHINE OVERALL DIMENSIONS WITH OPTIONAL EQUIPMENT
- 8.1.3. TECHNICAL CHARACTERISTICS
- 9. AUTHORIZED OPTIONAL EQUIPMENT
- 9.1. AUTHORIZED OPTIONAL EQUIPMENT
- 9.1.1. PRECAUTIONS REGARDING SAFETY
- 9.1.2. PRECAUTIONS REGARDING THE INSTALLATION OF EQUIPMENT
- 9.1.3. CHARACTERISTICS OF THE STANDARD MACHINE OPTIONAL EQUIPMENT
- 9.1.4. CHARACTERISTICS OF THE OPTIONAL EQUIPMENT OF THE MACHINE VERSION WITH SUPERFLOW HYDRAULIC SYSTEM
- 9.2. CHANGING THE AUTHORIZED EQUIPMENT
- 9.2.1. CONNECTING THE BACKHOE
- 9.2.2. CONNECTING THE HYDRAULIC CIRCUIT
- 9.2.3. CONNECTING THE RETURN CIRCUIT WITH DIRECT DRAINAGE INTO THE TANK
- 9.2.4. PREPARING THE MACHINE FOR THE USE OF THE BACKHOE
- 9.2.5. USING THE MACHINE WITH THE BACKHOE
- 9.3. PALLET FORKS
- 9.4. HAND FOOT CONTROL SYSTEM
- 9.4.1. MACHINE CONTROLS
- 9.4.2. HOW TO MOVE THE MACHINE (HAND FOOT CONTROL SYSTEM)
There are no reviews yet.