Description
-
Model List:
- WA600-3 Wheel Loader
- 1. MAIN MENU
- 2. COVER
- 3. CONTENTS
- 4. DRAWINGS OF UNITS DIVIDED FOR DELIVERY
- 5. WEIGHT AND DIMENSIONS TABLE OF UNITS DIVIDED FOR DELIVERY
- 6. ASSEMBLY WORK SCHEDULE
- 7. NECESSARY DEVICES AND TOOLS
- 8. ASSEMBLY PROCEDURE
- 8.1. INSTALLATION OF TIRE AND WHEEL ASSEMBLY
- 8.1.1. POSITIONING FO VEHICLE
- 8.1.2. REMOVAL OF AXLE STAND
- 8.1.3. SLINGING OF TIRE AND WHEEL ASSEMBLY
- 8.1.4. INSTALLATION OF TIRE AND WHEEL ASSEMBLY
- 8.2. INSTALLATION OF MUFFLER STACK
- 8.3. INSTALLATION OF CAB ASSEMBLY
- 8.3.1. REMOVAL OF FLOOR FRAME UNDERCOVERS
- 8.3.2. REMOVAL OF COVER IN CAB ASSEMBLY
- 8.3.3. SLINGING OF CAB ASSEMBLY
- 8.3.4. LOOSENING OF STEERING POST LOWER BOLT
- 8.3.5. OPERATION OF STEERING TILT LEVER
- 8.3.6. INSTALLATION OF SEAL
- 8.3.7. LOWERING OF CAB ASSEMBLY
- 8.3.8. TEMPORARY TIGHTENING OF STEERRING POST FIXING BOLTS
- 8.3.9. TEMPORARY TIGHTENING OF CAB ASSEMBLY MOUNTING BOLTS
- 8.3.10. PERMANENT TIGHTENING OF STEERING POST LOWER BOLT
- 8.3.11. PERMANENT TIGHTENING OF STEERING POST FIXING BOLT
- 8.3.12. CONNECTION OF WIRING CONNECTORS AND WASHER VINYL TUBES
- 8.3.13. INSTALLATION OF TROUBLESHOOTING SWITCH
- 8.3.14. INSTALLATION OF COVER IN CAB ASSEMBLY
- 8.3.15. INSTALLATION OF STEERING POST LOWER BELLOWS
- 8.3.16. INSTALLATION OF CAB ASSEMBLY RIGHTHAND COVER
- 8.3.17. INSTALLATION OF FLOOR FRAME LOWER COVER
- 8.3.18. INTALLATION OF MIRRORS AND MIRROR STAYS
- 8.4. INSTALLATION OF ROPS CANOPY
- 8.4.1. REMOVAL OF ANTENNA
- 8.4.2. REMOVAL OF REAR FRAME ROPS SUPPORT BOLTS TIGHTENED TEMPORARILY
- 8.4.3. SLINGING OF ROPS CANOPY
- 8.4.4. INSTALLATION OF ROPS CANOPY
- 8.4.5. INSTALLATION OF ANTENNA TO ROPS CANOPY
- 8.4.6. INSTALLATION OF ANTENAL WIRE HOLE GROMMET
- 8.5. INSTALLATION OF BUCKET
- 8.5.1. INSTALLATION OF CORD RING
- 8.5.2. ALIGHNIG OF BUCKET ASSEMBLY AND HINGE PIN HOLES
- 8.5.3. SELECTION OF SHIM FOR BUCKET HINGE PIN
- 8.5.4. INSERTION OF BUCKET HINGE PIN
- 8.5.5. INSTALLATION OF BUCKET HINGE PIN STOPPER
- 8.5.6. INSTALLATION OF BUCKET HINGE PIN AND RETAINER
- 8.5.7. LOWERING OF CORD RING TO GROOVE
- 8.5.8. INSTALLATION OF BUCKET LINK PIN
- 8.5.9. INSTALLATION OF GREASE NIPPLE AND PLUG
- 8.5.10. MEASUREMENT OF STEERING WHEEL OPERATING EFFORT
There are no reviews yet.