Komatsu WA600-6 Galeo Wheel Loader Operation and Maintenance Manual TEN00111-06

Description

• Model List:
  • WA600-6 Galeo Wheel Loader

• 1. COVER
• 2. FOREWORD
• 2.1. FOREWORD
• 2.2. SAFETY INFORMATION
• 2.3. INTRODUCTION
• 2.3.1. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
• 2.3.2. VISIBILITY FROM OPERATORS SEAT
• 2.4. NECESSARY INFORMATION
• 2.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
• 2.4.2. EPA REGULATIONS, ENGINE NUMBER PLATE
• 2.4.3. POSITION OF SERVICE METER
• 2.4.4. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 3. CONTENTS
• 4. SAFETY
• 4.1. SAFETY
• 4.2. SAFETY LABELS
• 4.2.1. LOCATION OF SAFETY LABELS
• 4.2.2. SAFETY LABELS
• 4.3. GENERAL PRECAUTIONS
• 4.3.1. SAFETY RULES
• 4.3.2. IF ABNORMALITIES ARE FOUND
• 4.3.3. CLOTHING AND PERSONAL PROTECTIVE ITEMS
• 4.3.4. FIRE EXTINGUISHER AND FIRST AID KIT
• 4.3.5. SAFETY FEATURES
• 4.3.6. KEEP MACHINE CLEAN
• 4.3.7. INSIDE OPERATORS COMPARTMENT
• 4.3.8. ALWAYS APPLY LOCK WHEN LEAVING OPERATORS SEAT
• 4.3.9. HANDRAILS AND STEPS
• 4.3.10. PRECAUTIONS WHEN CLEANING CAB GLASS
• 4.3.11. MOUNTING AND DISMOUNTING
• 4.3.12. NO PEOPLE ON ATTACHMENTS
• 4.3.13. DO NOT GET CAUGHT IN ARTICULATED PORTION
• 4.3.14. PREVENTION OF BURNS
• 4.3.15. FIRE PREVENTION
• 4.3.16. ACTION IF FIRE OCCURS
• 4.3.17. WINDOW WASHER LIQUID
• 4.3.18. PRECAUTIONS WHEN USING ROPS (ROLL OVER PROTECTIVE STRUCTURE)
• 4.3.19. PRECAUTIONS FOR ATTACHMENTS, OPTIONS
• 4.3.20. UNAUTHORIZED MODIFICATION
• 4.3.21. SAFETY AT WORKSITE
• 4.3.22. WORKING ON LOOSE GROUND
• 4.3.23. DO NOT GO CLOSE TO HIGHVOLTAGE CABLES
• 4.3.24. ENSURE GOOD VISIBILITY
• 4.3.25. PRECAUTIONS RELATED TO VENTILATION EXHAUST GAS
• 4.3.26. CHECKING SIGNALMANS SIGNALS AND SIGNS
• 4.3.27. EMERGENCY EXIT FROM OPERATORS CAB
• 4.3.28. BE CAREFUL ABOUT ASBESTOS DUST
• 4.4. PRECAUTIONS FOR OPERATION
• 4.4.1. STARTING ENGINE
• 4.4.2. OPERATION
• 4.4.3. TRANSPORTATION
• 4.4.4. BATTERY
• 4.4.5. TOWING
• 4.5. PRECAUTIONS FOR MAINTENANCE
• 4.5.1. WARNING TAG
• 4.5.2. KEEP WORK PLACE CLEAN AND TIDY
• 4.5.3. APPOINT LEADER WHEN WORKING WITH OTHERS
• 4.5.4. STOP ENGINE BEFORE CARRYING OUT MAINTENANCE
• 4.5.5. TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
• 4.5.6. INSPECTION AND MAINTENANCE AFTER TURNING E.C.S.S. SWITCH OFF
• 4.5.7. PROPER TOOLS
• 4.5.8. ACCUMULATOR
• 4.5.9. PERSONNEL
• 4.5.10. ATTACHMENTS
• 4.5.11. WORK UNDER THE MACHINE
• 4.5.12. NOISE
• 4.5.13. PRECAUTIONS WHEN USING HAMMER
• 4.5.14. REPAIR WELDING
• 4.5.15. REMOVING BATTERY TERMINAL
• 4.5.16. PRECAUTIONS WITH HIGHPRESSURE OIL
• 4.5.17. PRECAUTIONS FOR HIGHPRESSURE FUEL
• 4.5.18. HANDLING HIGHPRESSURE HOSES
• 4.5.19. WASTE MATERIALS
• 4.5.20. MAINTENANCE OF AIR CONDITIONER
• 4.5.21. COMPRESSED AIR
• 4.5.22. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 4.6. PRECAUTIONS WITH TIRES
• 4.6.1. HANDLING TIRES
• 4.6.2. PRECAUTIONS WHEN STORING TIRES
• 5. OPERATION
• 5.1. GENERAL VIEW
• 5.1.1. GENERAL VIEW OF MACHINE
• 5.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
• 5.2. EXPLANATION OF COMPONENTS
• 5.2.1. MACHINE MONITOR
• 5.2.2. SWITCHES
• 5.2.3. CONTROL LEVERS, PEDALS
• 5.2.4. CAP WITH LOCK
• 5.2.5. FRAME LOCK BAR
• 5.2.6. TOWING PIN
• 5.2.7. BACKUP ALARM
• 5.2.8. OPENING CAB, WINDOW DOOR
• 5.2.9. HANDLING CAB WIPER
• 5.2.10. DUST INDICATOR
• 5.2.11. FUSE
• 5.2.12. CIRCUIT BREAKER
• 5.2.13. SLOW BLOW FUSE
• 5.2.14. LUNCH BOX TRAY
• 5.2.15. TOOL BOX
• 5.2.16. GREASE PUMP
• 5.2.17. LOCATION OF FIRE EXTINGUISHER
• 5.2.18. POWER OUTLET
• 5.2.19. AM/FM RADIOCASSETTE STEREO
• 5.2.20. AIR CONDITIONER
• 5.3. OPERATION
• 5.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
• 5.3.2. STARTING ENGINE
• 5.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
• 5.3.4. STOPPING ENGINE
• 5.3.5. CHECK AFTER STOPPING ENGINE
• 5.3.6. MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE
• 5.3.7. TURNING
• 5.3.8. OPERATION OF WORK EQUIPMENT
• 5.3.9. SEMI AUTO DIGGING OPERATIONS
• 5.3.10. REMOTE POSITIONER
• 5.3.11. WORK POSSIBLE USING WHEEL LOADER
• 5.3.12. PRECAUTIONS FOR OPERATION
• 5.3.13. REMOVAL AND INSTALLATION OF THE BUCKET
• 5.3.14. PARKING MACHINE
• 5.3.15. CHECKS AFTER COMPLETION OF OPERATION
• 5.3.16. LOCKING
• 5.3.17. HANDLING THE TIRES
• 5.4. TRANSPORTATION
• 5.4.1. TRANSPORTATION PROCEDURE
• 5.4.2. LOADING, UNLOADING WORK
• 5.4.3. METHOD OF SECURING MACHINE
• 5.4.4. METHOD OF LIFTING MACHINE
• 5.4.5. PRECAUTIONS WHEN DISASSEMBLY OR REASSEMBLING WORK EQUIPMENT
• 5.5. COLD WEATHER OPERATION
• 5.5.1. PRECAUTIONS FOR LOW TEMPERATURE
• 5.5.2. PRECAUTIONS AFTER COMPLETION OF WORK
• 5.5.3. AFTER COLD WEATHER
• 5.5.4. WARMINGUP OPERATION FOR STEERING HYDRAULIC CIRCUIT IN COLD WEATHER
• 5.6. LONGTERM STORAGE
• 5.6.1. BEFORE STORAGE
• 5.6.2. DURING STORAGE
• 5.6.3. AFTER STORAGE
• 5.7. TROUBLESHOOTING
• 5.7.1. WHEN MACHINE RUNS OUT OF FUEL
• 5.7.2. METHOD OF TOWING MACHINE
• 5.7.3. IF BATTERY IS DISCHARGED
• 5.7.4. METHOD FOR LOWERING WORK EQUIPMENT WHEN ENGINE HAS STOPPED
• 5.7.5. OTHER TROUBLE
• 6. MAINTENANCE
• 6.1. GUIDES TO MAINTENANCE
• 6.2. OUTLINES OF SERVICE
• 6.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
• 6.2.2. OUTLINE OF ELECTRIC SYSTEM
• 6.3. WEAR PARTS
• 6.3.1. WEAR PARTS LIST
• 6.4. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
• 6.4.1. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
• 6.4.2. RECOMMENDED BRANDS, RECOMMENDED QUALITY FOR PRODUCTS OTHER THAN KOMATSU GENUINE OIL
• 6.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 6.5.1. TORQUE LIST
• 6.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 6.6.1. SAFETY CRITICAL PARTS
• 6.7. MAINTENANCE SCHEDULE CHART
• 6.7.1. MAINTENANCE SCHEDULE CHART
• 6.8. SERVICE PROCEDURE
• 6.8.1. INITIAL 10 HOURS SERVICE (SERVICE FOR FIRST 50 HOURS ON NEW MACHINE)
• 6.8.2. INITIAL 250 HOURS SERVICE
• 6.8.3. WHEN REQUIRED
• 6.8.4. CHECK BEFORE STARTING
• 6.8.5. EVERY 50 HOURS SERVICE
• 6.8.6. EVERY 100 HOURS SERVICE
• 6.8.7. EVERY 250 HOURS SERVICE
• 6.8.8. EVERY 500 HOURS SERVICE
• 6.8.9. EVERY 1000 HOURS SERVICE
• 6.8.10. EVERY 2000 HOURS SERVICE
• 6.8.11. EVERY 4000 HOURS SERVICE
• 6.8.12. EVERY 8000 HOURS SERVICE
• 7. SPECIFICATIONS
• 7.1. SPECIFICATIONS
• 8. ATTACHMENTS, OPTIONS
• 8.1. HANDLING STEERING WHEEL SPECIFICATION MACHINE
• 8.1.1. EXPLANATION OF COMPONENTS
• 8.1.2. FUNCTIONS OF STEERING WHEEL SPECIFICATION MACHINE
• 8.2. SELECTING BUCKET AND TIRES
• 8.3. STARTING IN COLD AREAS
• 8.3.1. ELECTRIC HEATER
• 8.4. HANDLING LOAD METER
• 8.4.1. OUTLINE OF LOAD METER
• 8.4.2. PRINCIPLE OF LOAD METER MEASUREMENT
• 8.4.3. POINTS TO REMEMBER TO ENSURE HIGH ACCURACY
• 8.4.4. USING LOAD METER
• 8.5. HANDLING AUTOGREASING SYSTEM
• 8.5.1. METHOD OF OPERATING AUTOGREASING SYSTEM
• 8.5.2. PRECAUTIONS WHEN HANDLING AUTOGREASING SYSTEM
• 8.5.3. TROUBLESHOOTING
• 8.6. HANDLING QUICK COUPLER CONTROL SYSTEM
• 8.6.1. EXPLANATION OF COMPONENTS
• 8.6.2. FUNCTION AND METHOD OF OPERATION OF QUICK COUPLER SWITCH
• 8.6.3. METHOD OF REMOVING AND INSTALLING ATTACHMENT
• 8.6.4. INSPECTION AND MAINTENANCE
• 8.6.5. METHOD OF TURNING BOTTOM FRONT WORKING LAMP ON/OFF
• 8.7. HANDLING BATTERY DISCONNECTOR SWITCH
• 8.7.1. EXPLANATION OF COMPONENTS
• 8.7.2. HANDLING
• 8.8. HANDLING STARTING AID CONNECTOR
• 8.9. HANDLING REAR FENDER
• 8.9.1. HANDLING
• 8.10. HANDLING MACHINES EQUIPPED WITH VHMS
• 8.10.1. VHMS INSTALLED, COMMUNICATIONS TERMINAL NOT INSTALLED
• 8.10.2. VHMS AND COMMUNICATIONS TERMINAL INSTALLED
• 9. INDEX