Komatsu WB140-2, WB150-2 Backhoe Loader Operation and Maintenance Manual WEAM000903

Description

• Model List:
  • WB140-2 Backhoe Loader
  • WB150-2 Backhoe Loader

• 1. MAIN MENU
• 2. COVER
• 3. TABLE OF CONTENTS
• 4. FOREWORD
• 5. INFORMATION ON SAFETY
• 6. INTRODUCTION
• 6.1. INTENDED USES
• 6.2. IMPROPER OR UNAUTHORIZED USES
• 6.3. MAIN CHARACTERISTICS
• 6.4. RUNNINGIN
• 6.5. PRODUCT IDENTIFICATION
• 6.6. MACHINE SERIAL NUMBER
• 6.7. MACHINE IDENTIFICATION PLATE
• 6.8. ENGINE SERIAL NUMBER AND EMISSION LABEL
• 6.9. FRONT AXLE SERIAL NUMBER
• 6.10. REAR AXLE SERIAL NUMBER
• 6.11. TRANSMISSION SERIAL NUMBER
• 6.12. CAB SERIAL NUMBER
• 6.13. CANOPY SERIAL NUMBER
• 6.14. SERIAL NUMBERS AND DEALERS ADDRESS
• 7. SAFETY AND ACCIDENT PREVENTION
• 7.1. GENERAL PRECAUTIONS
• 8. PRECAUTIONS
• 8.1. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
• 8.2. PRECAUTIONS TO BE TAKEN WHEN WORKING
• 8.3. TRANSPORTING THE MACHINE ON OTHER VEHICLES
• 8.4. THE BATTERY
• 8.5. PRECAUTIONS FOR EMERGENCY RECOVERY
• 8.6. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
• 8.7. SAFETY PLATES
• 9. TECHNICAL SPECIFICATIONS
• 9.1. TECHNICAL DATA
• 10. THE MACHINE AND ITS OPERATIONS
• 10.1. SAFETY LOCKS
• 10.2. GENERAL VIEWS
• 10.3. INSTRUMENTS AND CONTROLS
• 10.4. FUSES AND RELAYS
• 10.5. GUARDS, CAB AND DRIVERS SEAT
• 10.6. USE OF MACHINE
• 10.7. PARKING THE MACHINE
• 10.8. STOPPING THE ENGINE
• 10.9. TRANSPORTING THE MACHINE ON OTHER VEHICLES
• 10.10. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
• 10.11. PRECAUTIONS TO BE TAKEN IN THE WARM SEASON
• 10.12. USING THE MACHINE AS A LOADER
• 10.13. USING THE MACHINE AS AN EXCAVATOR
• 10.14. TROUBLESHOOTING
• 11. MAINTENANCE
• 11.1. GUIDE TO MAINTENANCE
• 11.2. MAINTENANCE NOTES
• 11.3. FUEL, COOLAND AND LUBRICANTS
• 11.4. NUT AND BOLT TIGHTENING TORQUES
• 11.5. MAINTENANCE PLAN
• 11.6. LONG PERIODS OF INACTIVITY
• 12. AUTHORIZED OPTIONAL EQUIPMENT
• 12.1. AUTHORIZED OPTIONAL EQUIPMENT
• 12.2. FRONT EQUIPMENT QUICK COUPLING DEVICES
• 12.3. MULTIPURPOSE BUCKET
• 12.4. PALLET FORKS
• 12.5. BACKHOE TELESCOPIC ARM
• 12.6. ARRANGEMENT FOR THE INSTALLATION OF THE DEMOLITION HAMMER
• 12.7. ARRANGEMENT FOR THE OPERATION OF THE OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW
• 12.8. ARRANGEMENT FOR THE INSTALLATION OF THE CLAMSHELL BUCKET
• 12.9. ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER
• 12.10. LOAD STABILIZER SYSTEM (LSS) (OPTIONAL)
• 12.11. AIR CONDITIONER (OPTIONAL)