Komatsu WD600-6 Wheel Dozer Field Assembly Manual GEN00096-04

Description

• Model List:
  • WD600-6 Wheel Dozer

• 1. Cover
• 2. Block outline
• 3. Principal component dimension table
• 4. Work space layout
• 5. General assembly schedule
• 6. List of equipment, jigs, tools and consumables
• 7. Oil, grease and paints
• 8. Assembly procedure
• 8.1. Oil and coolant
• 8.2. Oil and coolant capacity
• 8.3. Setting the front axle and bare machine to stationary position
• 8.4. Installing the front axle
• 8.5. Connecting the drive shaft
• 8.6. Connecting the brake pipe
• 8.7. Connecting the brake pipe (Brake cooling specification)
• 8.8. Installing tire and rim assembly
• 8.9. Installing step
• 8.10. Installing cab (1)
• 8.11. Installing cab (2) (AJSS specification)
• 8.12. Installing cab (2) (Steering wheel specification)
• 8.13. Installing cab (2) (AJSS and steering wheel specification)
• 8.14. Installing cab (3)
• 8.15. Installing cab (4) (AJSS specification)
• 8.16. Installing cab (4) (Steering wheel specification)
• 8.17. Installing cab (5) (Steering wheel specification)
• 8.18. Installing cab (6) (AJSS and steering wheel specification)
• 8.19. Installing cab harness (1/3)
• 8.20. Installing cab harness (2/3)
• 8.21. Installing cab harness (3/3) (Steering wheel specification)
• 8.22. Installing cab duct (1/3)
• 8.23. Installing cab duct (2/3)
• 8.24. Installing cab duct (3/3)
• 8.25. Installation of yellow rotary lamp
• 8.26. Installing front fender
• 8.27. Installing front light support and connection
• 8.28. Installing muffler stack and mirror
• 8.29. Installing rear access ladder and L.H. platform
• 8.30. Installing the left handrail
• 8.31. Installing right platform and R.H. handrail
• 8.32. Installing fire extinguisher
• 8.33. Installing the rear fender mudguard plate
• 8.34. Installing rear fender
• 8.35. Installing cab undercover
• 8.36. Checking of sections
• 8.37. Air bleeding of work equipment hydraulic circuit and respective cylinders
• 8.38. Starting engine (1/2)
• 8.39. Starting engine (2/2)
• 8.40. Bleeding air from brake system
• 8.41. Installation of Hlink and Ylink
• 8.42. Installation of right and left support assemblies
• 8.43. Installation of right and left frame assemblies
• 8.44. Installation of blade assembly (1/2)
• 8.45. Installation of blade assembly (2/2)
• 8.46. Greasing (1st time)
• 8.47. Deleting the electrical system failure history (1/3)
• 8.48. Deleting the electrical system failure history (2/3)
• 8.49. Deleting the electrical system failure history (3/3)
• 8.50. Installing the floor mat (AJSS specification)
• 8.51. Installing the floor mat (Steering wheel specification)
• 8.52. Runningin procedure (1/2)
• 8.53. Runningin procedure (2/2)
• 8.54. Greasing (2nd time)
• 8.55. Touch up work
• 8.56. On use of starter kit (dummy harness) and precaution on its use
• 8.57. Starter kit (dummy harness) assembling procedure
• 8.58. Check inflation pressure of tires
• 9. Appendix Machine check sheet for field assembly