Linde 1124-01 – R14S-20, R16S-20, R16SHD-20, R20S-20 Production site XM2 Operating Instructions SN C21124Y00001 and up

Description

• Model List:
  • R14S-20
  • R16S-20
  • R16SHD-20
  • R20S-20

• 1. Electric Reach TruckR14S20, R16S20, R20S20
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. General information
• 1.2.2. Conformity marking
• 1.2.3. Declaration that reflects the content of the declaration of conformity
• 1.2.4. Factory nameplate
• 1.2.5. Intended use
• 1.2.6. Hazard assessment
• 1.2.7. Impermissible use
• 1.2.8. Improper use
• 1.2.9. Symbols used
• 1.2.10. Disposing of components and batteries
• 1.3. Safety
• 1.3.1. Residual risks
• 1.3.2. Stability
• 1.3.3. In the case of tipover
• 1.3.4. EMC Electromagnetic compatibility
• 1.3.5. Operating company
• 1.3.6. Drivers
• 1.3.7. Competent person
• 1.3.8. Regulations
• 1.3.9. Handling consumables
• 1.3.10. Fitting attachments
• 1.3.11. Manually lowering the forks
• 1.3.11.1. Style 2
• 1.3.11.1.1. Manually lowering the forks
• 1.4. Operation
• 1.4.1. Instructions for runningin
• 1.4.2. Preshift checks
• 1.4.3. Using the RFID Keypad (optional)
• 1.4.3.1. RFID Keypad installation position
• 1.5. Maintenance
• 1.5.1. Safety information for inspection and maintenance work
• 1.5.2. Regular maintenance
• 1.5.3. Drivers cab
• 1.5.4. Lifting system
• 1.5.4.1. Checking the working condition and installation of the lift mast, lifting chains and lift cylinder
• 1.5.4.2. Adjusting the length of the lifting chains and lubricating using chain spray
• 1.5.4.3. Lubricating the lift mast and chains with chain spray
• 1.5.5. Special equipment
• 1.5.5.1. Checking the preload of the double hoses (if equipped with attachments)
• 1.5.5.2. Cleaning and lubricating the sideshift forks and checking connections
• 1.6. Technical datasheet
• 1.6.1. Ecodesign requirements for electric motors and variable speed drives