Linde 1158-05 – T20AP05 Production site Xiamen Operating Instructions SN C11158V50001 and up

Description

• Model List:
  • T20AP05

• 1. Electric Pallet Forklift TruckT20AP05
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your truck
• 1.2.2. Special use of equipment
• 1.2.3. Impermissible use
• 1.2.4. Symbols used
• 1.2.5. Technical description
• 1.3. Safety
• 1.3.1. Safety regulations
• 1.3.2. Use of lubricants
• 1.3.3. EMC Electromagnetic compatibility
• 1.3.4. Residual risks
• 1.3.5. Periodic general checks on trucks
• 1.3.6. Stability
• 1.3.7. Handling consumables
• 1.3.8. Regulations
• 1.3.9. Competent person
• 1.4. General view
• 1.4.1. General view
• 1.4.2. Labels
• 1.4.3. Display unit
• 1.4.4. Controls
• 1.4.5. Digicode (optional)
• 1.5. Operation
• 1.5.1. Setup
• 1.5.2. Checks before first use
• 1.5.3. Daily checks before use
• 1.5.4. Operating instructions
• 1.5.5. Driving the truck
• 1.5.6. Braking, lifting, lowering, horn
• 1.5.7. Working with loads
• 1.5.8. Lifting, towing
• 1.6. Maintenance
• 1.6.1. Summary of checks and maintenance tasks
• 1.6.1.1. Maintenance
• 1.6.1.2. Calendar of testing and maintenance operations
• 1.6.1.3. Calendar of testing and maintenance operations
• 1.6.1.4. hour maintenance plan
• 1.6.1.5. hour maintenance plan
• 1.6.1.6. hour maintenance plan
• 1.6.1.7. Technical parameters for inspection and maintenance
• 1.6.1.8. Recommended lubricants
• 1.6.2. Daily checks before starting work
• 1.6.2.1. Checking the drive direction controls
• 1.6.2.2. Checking the brakes
• 1.6.2.3. Checking the electric steering
• 1.6.2.4. Checking the lifting.lowering controls
• 1.6.2.5. Checking the electrical isolation switch and horn
• 1.6.2.6. Checking specific safety devices
• 1.6.2.7. Checking the safety devices
• 1.6.2.8. Checking the battery charge status
• 1.6.2.9. Opening the battery cover
• 1.6.2.10. Plugging in.unplugging the battery connector
• 1.6.2.11. Checking the condition of the cables, terminals and battery connector
• 1.6.2.12. Recharging the battery with an external battery charger
• 1.6.2.13. Battery with vertical access
• 1.6.2.14. Side access battery unlocking.locking the battery
• 1.6.2.15. Changing the battery sideways
• 1.6.2.16. Battery for side removal
• 1.6.2.17. Side access battery selection of battery compartment opening side
• 1.6.3. Checks and maintenance as required
• 1.6.3.1. Cleaning the truck
• 1.6.3.2. Cleaning the battery and its compartment
• 1.6.3.3. Opening the front hood
• 1.6.3.4. Removing the dashboard
• 1.6.3.5. Checking fuses
• 1.6.3.6. Hoist assembly, greasing the rings and articulations (greased option)
• 1.6.4. Traction motor
• 1.6.4.1. Cleaning the traction motor cooling fins
• 1.6.5. Steering.braking.wheels
• 1.6.5.1. Checking the condition of the wheels
• 1.6.5.2. Check the wheel fastenings
• 1.6.5.3. Checking the brake air gap
• 1.6.6. Electrical system
• 1.6.6.1. Cleaning the electrical plate and checking the connections
• 1.6.6.2. Inspecting the control module and checking the wiring
• 1.6.6.3. Checking and cleaning the fans
• 1.6.6.4. Electric equipment, checking the condition and fixing the cables and electrical connections
• 1.6.6.5. Battery maintenance
• 1.6.7. Hydraulic circuit
• 1.6.7.1. Main hydraulic circuit
• 1.6.7.2. Hoist assembly
• 1.6.7.3. Primary hydraulic circuit
• 1.7. Datasheet
• 1.7.1. Technical data diagram
• 1.7.2. Datasheet