Linde 1275-02 – EG16, EG16H, EG16P, EG16PH, EG20PH Production site Kolbaskowo Operating Instructions SN 11.22 and up

Description

• Model List:
  • EG16
  • EG16H
  • EG16P
  • EG16PH
  • EG20PH

• 1. Electric truckEG1602, EG16H02, EG16P02, EG16PH02, EG20PH02
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. The truck
• 1.2.1.1. General information
• 1.2.1.2. Conformity marking
• 1.2.1.3. Declaration that reflects the content of the declaration of conformity
• 1.2.1.4. Declarations of conformity in accordance with directive RED 2014.53.EU
• 1.2.1.5. Nameplate
• 1.2.1.6. Serial number and identification plates of the components
• 1.2.1.7. Truck configuration
• 1.2.1.8. Nameplate of a lithiumion battery
• 1.2.1.9. Reception of truck
• 1.2.2. Application conditions
• 1.2.2.1. Intended use
• 1.2.2.2. Improper use
• 1.2.2.3. Hazard assessment
• 1.2.3. Information about the operating instructions
• 1.2.3.1. Documentation
• 1.2.3.2. Symbols used
• 1.2.4. Disposing of components and batteries
• 1.3. Safety
• 1.3.1. Responsible persons
• 1.3.1.1. Operating company
• 1.3.1.2. Drivers
• 1.3.1.3. Competent person
• 1.3.2. Operating safely
• 1.3.2.1. Requirements
• 1.3.2.2. Accidents involving lithiumion batteries
• 1.3.2.3. Stability
• 1.3.2.4. Data security
• 1.3.2.5. Residual risks
• 1.3.2.6. Wheelslide protection chains in winter operation
• 1.3.3. Emissions
• 1.3.3.1. Electromagnetic compatibility
• 1.3.4. Working on the truck
• 1.3.4.1. Handling the lithiumion battery
• 1.3.4.2. Handling consumables
• 1.3.4.3. Fitting attachments
• 1.3.5. Periodic safety inspection
• 1.4. Overview
• 1.4.1. Truck overview
• 1.4.2. Operating devices
• 1.4.3. Display unit
• 1.4.4. Switch panel
• 1.5. Operation
• 1.5.1. Initial commissioning
• 1.5.1.1. Checks before initial commissioning
• 1.5.1.2. Instructions for runningin
• 1.5.2. Preshift checks
• 1.5.3. Drivers compartment
• 1.5.3.1. Entering and exiting the truck
• 1.5.3.2. Minimum distance between head and overhead guard
• 1.5.3.3. Adjusting the drivers seat (standard) and seat belt
• 1.5.3.4. Adjusting the drivers seat (comfort) and seat belt
• 1.5.3.5. Adjusting the drivers seat (luxury drivers seat)
• 1.5.3.6. Seat belt monitoring and alarm function
• 1.5.3.7. Drivers cab
• 1.5.3.8. Lighting
• 1.5.3.9. BlueSpot
• 1.5.3.10. Windscreen wiper functions
• 1.5.3.11. Rear window heating
• 1.5.3.12. Heating system
• 1.5.4. Display unit
• 1.5.4.1. Starting up the system
• 1.5.4.2. Control buttons
• 1.5.4.3. Status display menu
• 1.5.4.4. Speed indicator menu
• 1.5.4.5. Settings menu
• 1.5.4.6. Malfunctions menu
• 1.5.5. Operation
• 1.5.5.1. Switching the truck on and off Single pedal operation
• 1.5.5.2. Switching the truck on and off Dual pedal operation
• 1.5.5.3. Access system connect
• 1.5.5.4. Emergency off switches
• 1.5.5.5. Driving Dualpedal operation
• 1.5.5.6. Driving Singlepedal operation
• 1.5.5.7. Briefly leaving the truck
• 1.5.5.8. Steering system
• 1.5.5.9. Brake system
• 1.5.5.10. Joystick Central lever operation
• 1.5.5.11. Joystick Single lever operation
• 1.5.5.12. Reducing the driving speed using a radar sensor (SpeedAssist)
• 1.5.6. Working with a load
• 1.5.6.1. Capacity rating plate
• 1.5.6.2. Additional capacity rating plate for attachments
• 1.5.6.3. Adjusting the fork arm distance
• 1.5.6.4. Determining visibility conditions when driving with a load
• 1.5.6.5. Driving with a load
• 1.5.6.6. Transporting suspended loads
• 1.5.6.7. Setting down a load
• 1.5.6.8. Towing device
• 1.5.6.9. Mast positioning
• 1.5.7. Leaving the truck
• 1.5.8. Drive batteries
• 1.5.8.1. Special instructions and course of action for BSeries lithiumion batteries
• 1.5.8.2. Checking the battery charge state
• 1.5.8.3. Opening and closing the battery hood
• 1.5.8.4. Charging the lithiumion battery
• 1.5.8.5. Charging the leadacid battery
• 1.5.8.6. Replacing the lithiumion battery (B series)
• 1.5.8.7. Replacing the leadacid battery
• 1.5.8.8. Replacing the leadacid battery using a hand pallet truck and battery support (optional)
• 1.5.8.9. Replacing the leadacid battery using a truck and battery support (optional)
• 1.5.8.10. Replacing the leadacid battery using a truck and battery pallet (optional)
• 1.5.9. Emergency operation
• 1.5.9.1. Emergency lowering
• 1.5.9.2. Towing
• 1.5.10. Loading.transporting
• 1.5.10.1. Removing.attaching the lift mast
• 1.5.10.2. Transporting the truck using a lorry or flat bed trailer
• 1.5.10.3. Lithiumion battery Transporting the battery
• 1.6. Service and maintenance
• 1.6.1. Safety information regarding servicing work
• 1.6.2. Overview of filling quantities and set values
• 1.6.3. Recommendation for consumables
• 1.6.4. Regular maintenance
• 1.6.5. Cleaning the truck
• 1.6.6. Running gear and drive train
• 1.6.6.1. Changing wheels
• 1.6.6.2. Tightening the wheel fastenings
• 1.6.6.3. Checking the condition of the antistatic belt
• 1.6.6.4. Lubricating the swing steering axle
• 1.6.7. Electrics.electronics
• 1.6.7.1. Checking the condition of the electric cables and connections
• 1.6.8. Hydraulics
• 1.6.8.1. Checking that the bleeder valve on the hydraulic tank is working correctly
• 1.6.8.2. Hydraulic systemChecking for leak tightness
• 1.6.8.3. Checking the preload of the hose lines
• 1.6.9. Lifting system
• 1.6.9.1. Working on the lift mast and at the front of the truck
• 1.6.9.2. Checking the condition of the lift mast
• 1.6.9.3. Cleaning and spraying the lift mast chain
• 1.6.9.4. Checking the fork arms and arm safety devices
• 1.6.9.5. Checking and lubricating the sideshift (special equipment)
• 1.6.10. Selfhelp
• 1.6.10.1. Opening and closing the fuse box
• 1.6.10.2. Fuses for basic equipment and for special equipment
• 1.6.10.3. Diagnostic connector
• 1.6.10.4. Lithiumion battery Diagnostic connector
• 1.6.10.5. Lithiumion battery Power reduction due to vibration
• 1.6.10.6. Malfunctions on the lithiumion battery
• 1.6.10.7. Malfunctions in the electric parking brake
• 1.6.10.8. Malfunctions, causes and remedies Hydraulic system
• 1.6.11. Decommissioning
• 1.6.11.1. Parking for an extended period Decommissioning the truck
• 1.6.11.2. Leadacid battery Storage
• 1.6.11.3. Disposal of industrial trucks
• 1.7. Technical datasheet
• 1.7.1. Overview of dimensions
• 1.7.2. EG16.EG16H Technical datasheet
• 1.7.3. EG16P.EG16PH Technical datasheet
• 1.7.4. EG20PH Technical datasheet
• 1.7.5. Ecodesign requirements for electric motors and variable speed drives
• 1.7.6. Lift mast data for model 1511