Linde 1276-02 – EG25-02, EG25H-02, EG30-02, EG30H-02, EG35H-02 Production site LMH Poland Operating Instructions

Description

• Model List:
  • EG25-02
  • EG25H-02
  • EG30-02
  • EG30H-02
  • EG35H-02 Production site LMH Poland

• 1. Electric truckEG2502, EG3002,EG25H02, EG30H02,EG35H02
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. The truck
• 1.2.1.1. Technical description
• 1.2.1.2. General information
• 1.2.1.3. Conformity marking
• 1.2.1.4. Declaration that reflects the content of the declaration of conformity
• 1.2.1.5. Declarations of conformity in accordance with directive RED 2014.53.EU
• 1.2.1.6. Nameplate
• 1.2.1.7. Serial number and identification plates of the components
• 1.2.1.8. Truck configuration
• 1.2.1.9. Nameplate of a lithiumion battery
• 1.2.1.10. Reception of truck
• 1.2.2. Application conditions
• 1.2.2.1. Intended use
• 1.2.2.2. Improper use
• 1.2.2.3. Hazard assessment
• 1.2.3. Information about the operating instructions
• 1.2.3.1. Documentation
• 1.2.3.2. Symbols used
• 1.2.4. Disposing of components and batteries
• 1.3. Safety
• 1.3.1. Responsible persons
• 1.3.1.1. Operating company
• 1.3.1.2. Drivers
• 1.3.1.3. Competent person
• 1.3.2. Operating safely
• 1.3.2.1. Accidents involving lithiumion batteries
• 1.3.2.2. Stability
• 1.3.2.3. Data security
• 1.3.2.4. Residual risks
• 1.3.2.5. Wheelslide protection chains in winter operation
• 1.3.3. Emissions
• 1.3.3.1. Noise emission values
• 1.3.3.2. Vibration characteristics for body vibrations
• 1.3.3.3. Electromagnetic compatibility
• 1.3.4. Working on the truck
• 1.3.4.1. Handling the lithiumion battery
• 1.3.4.2. Handling consumables
• 1.3.4.3. Fitting attachments
• 1.3.5. Periodic safety inspection
• 1.4. Overview
• 1.4.1. Truck overview
• 1.4.2. Operating devices
• 1.4.3. Display unit
• 1.4.4. Switch panel
• 1.5. Operation
• 1.5.1. Initial commissioning
• 1.5.1.1. Checks before initial commissioning
• 1.5.1.2. Instructions for runningin
• 1.5.2. Preshift checks
• 1.5.3. Drivers compartment
• 1.5.3.1. Entering and exiting the truck
• 1.5.3.2. Minimum distance between head and overhead guard
• 1.5.3.3. Adjusting the drivers seat (standard) and seat belt
• 1.5.3.4. Adjusting the drivers seat (comfort) and seat belt
• 1.5.3.5. Adjusting the drivers seat (luxury drivers seat)
• 1.5.3.6. Seat belt monitoring and alarm function
• 1.5.3.7. BlueSpot
• 1.5.4. Configuring the display unit
• 1.5.5. Operation
• 1.5.5.1. Switching the truck on and off Single pedal operation
• 1.5.5.2. Switching the truck on and off Dual pedal operation
• 1.5.5.3. Access system connect
• 1.5.5.4. Emergency off switch
• 1.5.5.5. Driving Singlepedal operation
• 1.5.5.6. Driving Dualpedal operation
• 1.5.5.7. Briefly leaving the truck
• 1.5.5.8. Steering system
• 1.5.5.9. Brake system
• 1.5.5.10. Joystick Central lever actuation
• 1.5.5.11. Joystick Singlelever operation
• 1.5.5.12. Reducing the driving speed using a radar sensor (SpeedAssist)
• 1.5.6. Working with a load
• 1.5.6.1. Capacity rating plate
• 1.5.6.2. Additional capacity rating plate for attachments
• 1.5.6.3. Adjusting the fork arm distance
• 1.5.6.4. Determining visibility conditions when driving with a load
• 1.5.6.5. Driving with a load
• 1.5.6.6. Transporting suspended loads
• 1.5.6.7. Setting down a load
• 1.5.6.8. Towing device
• 1.5.6.9. Mast positioning
• 1.5.6.10. Leaving the truck
• 1.5.7. Drive batteries
• 1.5.7.1. Special instructions and course of action for BSeries lithiumion batteries
• 1.5.7.2. Checking the battery charge state
• 1.5.7.3. Opening and closing the battery hood
• 1.5.7.4. Charging the lithiumion battery
• 1.5.7.5. Charging the leadacid battery
• 1.5.7.6. Replacing the lithiumion battery (B series)
• 1.5.7.7. Replacing the leadacid battery
• 1.5.7.8. Replacing the battery using a hand pallet truck and battery support (optional)
• 1.5.7.9. Replacing the battery using a truck and battery support (optional)
• 1.5.7.10. Replacing the battery using a truck and battery pallet (optional)
• 1.5.8. Emergency operation
• 1.5.8.1. Emergency lowering
• 1.5.8.2. Towing
• 1.5.9. Loading.transporting
• 1.5.9.1. Removing.attaching the lift mast
• 1.5.9.2. Transporting the truck using a lorry or flatbed trailer
• 1.5.9.3. Lithiumion battery Transporting the battery
• 1.6. Service and maintenance
• 1.6.1. Safety information regarding servicing work
• 1.6.2. Regular maintenance
• 1.6.3. Service plan
• 1.6.4. Cleaning the truck
• 1.6.5. Running gear and drive train
• 1.6.5.1. Changing wheels
• 1.6.5.2. Tightening the wheel fastenings
• 1.6.5.3. Checking the condition of the antistatic belt
• 1.6.5.4. Lubricating the steering axle
• 1.6.6. Electrics.electronics
• 1.6.6.1. Checking the condition of the electric cables and connections
• 1.6.7. Hydraulics
• 1.6.7.1. Checking the hydraulic oil level
• 1.6.7.2. Checking that the bleeder valve on the hydraulic tank is working correctly
• 1.6.7.3. Hydraulic systemChecking for leak tightness
• 1.6.7.4. Checking the preload of the hose lines
• 1.6.8. Lifting system
• 1.6.8.1. Working on the lift mast and at the front of the truck
• 1.6.8.2. Checking the condition of the lift mast
• 1.6.8.3. Cleaning and spraying the lift mast chain
• 1.6.8.4. Checking the fork arms and arm safety devices
• 1.6.8.5. Checking and lubricating the sideshift (special equipment)
• 1.6.9. Selfhelp
• 1.6.9.1. Opening and closing the cover for the electrical system and the fuse box
• 1.6.9.2. Fuses for basic equipment and for special equipment
• 1.6.9.3. Diagnostic connector
• 1.6.9.4. Lithiumion battery Diagnostic connector
• 1.6.9.5. Lithiumion battery Power reduction due to vibration
• 1.6.9.6. Malfunctions in the electric parking brake
• 1.6.9.7. Malfunctions, causes and remedies Hydraulic system
• 1.6.9.8. Malfunctions on the lithiumion battery
• 1.6.10. Decommissioning
• 1.6.10.1. Parking for an extended period Decommissioning the truck
• 1.6.10.2. Leadacid battery Storage
• 1.6.10.3. Disposal of industrial trucks
• 1.7. Technical data
• 1.7.1. Dimensions
• 1.7.2. Technical datasheet for the EG25.EG25H
• 1.7.3. Technical datasheet for the EG30.EG30H.EG35H
• 1.7.4. Ecodesign requirements for electric motors and variable speed drives
• 1.7.5. Lift mast data for model 1512
• 1.7.6. Tyre variants and rim sizes