Linde 140-01 – T20 EX Operating Instructions

Description

• Model List:
  • T20 EX

• 1. Betriebsanleitung
• 2. Pallet truckwith drivers seatT20R Ex
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your industrial truck
• 2.2.2. Intended use
• 2.2.3. Impermissible use
• 2.2.4. Basic information on explosion protection
• 2.2.5. Description of use and climatic conditions
• 2.2.6. Symbols used
• 2.2.7. Technical description
• 2.2.8. Drive
• 2.2.9. Steering system
• 2.2.10. Braking
• 2.2.11. Lifting accessory
• 2.2.12. Electrical system
• 2.2.13. Insulation monitoring
• 2.2.14. Insulation monitoring warning
• 2.2.15. Insulation monitoring fault
• 2.2.16. Temperature monitoring
• 2.2.17. Receiving the industrial truck
• 2.2.18. Legal requirements for placing on the market
• 2.3. Safety
• 2.3.1. Safety regulations
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. If the truck tips over
• 2.3.5. Handling consumables
• 2.3.6. Qualified person
• 2.3.7. Regulations
• 2.4. Overview
• 2.4.1. Nameplate.adhesive label
• 2.4.2. Nameplate
• 2.4.3. Operating devices
• 2.4.4. Display unit
• 2.4.5. Indicator lights
• 2.5. Operation
• 2.5.1. Service plan before initial commissioning
• 2.5.2. Instructions for runningin
• 2.5.3. Preshift checks
• 2.5.4. Standard equipment
• 2.5.4.1. Adjusting the seat
• 2.5.4.2. Seat safety contact
• 2.5.4.3. Switching the truck on and off
• 2.5.4.4. Traction (dualpedal operation)
• 2.5.4.5. Traction (singlepedal operation)
• 2.5.4.6. Steering system
• 2.5.4.7. Brake system
• 2.5.4.8. Checking the industrial truck for leaks
• 2.5.4.9. Checking the requirement for the tyre leak resistance
• 2.5.4.10. Horn
• 2.5.4.11. Emergency off switch
• 2.5.5. Working with a load
• 2.5.5.1. Before taking up load
• 2.5.5.2. Picking up a load
• 2.5.5.3. Driving with a load
• 2.5.5.4. Driving on gradients
• 2.5.5.5. Setting down loads
• 2.5.6. Exiting the truck
• 2.5.6.1. Before exiting the truck
• 2.5.7. Loading.transporting
• 2.5.7.1. Crane loading
• 2.5.7.2. Transport
• 2.6. Servicing
• 2.6.1. General information
• 2.6.2. Inspection and maintenance data
• 2.6.3. Recommendations for consumables
• 2.6.4. Inspection and maintenance overview
• 2.6.4.1. Service plan after 50 hours after 3 months at the latest
• 2.6.4.2. Service plan every 500 hours after 6 months at the latest
• 2.6.4.3. Service plan every 1000 hours after a year at the latest
• 2.6.4.4. Service plan every 2000 hours after 2 years at the latest
• 2.6.5. Chassis, bodywork and fittings
• 2.6.5.1. Removing dust deposits
• 2.6.5.2. Cleaning the industrial truck
• 2.6.5.3. Opening the bonnet
• 2.6.5.4. Removing the floor
• 2.6.5.5. Lubricating the lifting system joints
• 2.6.5.6. Other cleaning and greasing
• 2.6.6. Chassis frame
• 2.6.6.1. Checking the brake system
• 2.6.6.2. Wheel gear Changing the oil
• 2.6.6.3. Checking the tyres for damage and foreign objects
• 2.6.6.4. Checking the wheel fastenings
• 2.6.7. Electrics.electronics
• 2.6.7.1. Battery check
• 2.6.7.2. Checking the battery charge status
• 2.6.7.3. Connecting the battery to an external battery charger
• 2.6.7.4. Replacing the battery
• 2.6.7.5. Checking the main contactor
• 2.6.7.6. Checking the condition and secure attachment of electric lines, cable connectors, cable connections and explosionprotected screw joints
• 2.6.8. Hydraulics
• 2.6.8.1. Checking the hydraulic oil level
• 2.6.8.2. Changing the hydraulic oil
• 2.6.9. Load lift system
• 2.6.9.1. Checking the load fork
• 2.6.10. Troubleshooting
• 2.6.10.1. Fuses
• 2.6.10.2. Diagnostic connector
• 2.6.10.3. Shutting down
• 2.6.10.4. Disposal of old trucks
• 2.6.10.5. Malfunctions during operation
• 2.7. Technical data
• 2.7.1. Type sheet T20 R Ex
• 2.7.2. Vibration characteristics