Linde 396-01 – H50D, H50T, H60D, H60T, H70D, H70T, H80D, H80T Operating Instructions SN 04.08 and up SN up to 02.14

Description

• Model List:
  • H50D
  • H50T
  • H60D
  • H60T
  • H70D
  • H70T
  • H80D
  • H80T

• 1. Diesel truckH50D, H60D, H70D, H80D
• 1.1. Table of content
• 1.2. Introduction
• 1.2.1. Your forklift truck
• 1.2.2. Intended use
• 1.2.3. Impermissible use
• 1.2.4. Description of use and climatic conditions
• 1.2.5. Symbols used
• 1.2.6. Technical description
• 1.2.7. Taking delivery of the industrial truck
• 1.2.8. Legal requirements for placing on the market
• 1.3. Safety
• 1.3.1. Safety guidelines
• 1.3.2. Residual risks
• 1.3.3. Stability
• 1.3.4. In the case of tipover
• 1.3.5. Handling consumables
• 1.3.6. Competent person
• 1.3.7. Regulations
• 1.3.8. Fit attachments
• 1.3.9. Fork carriage emergency lowering
• 1.3.10. Emergency exit with attached rear window
• 1.4. Overview
• 1.4.1. Identification plates
• 1.4.2. Truck overview
• 1.4.3. Controls
• 1.4.4. Display unit
• 1.4.5. Switch panel
• 1.5. Operation
• 1.5.1. Service plan before initial commissioning
• 1.5.2. Instructions for runningin
• 1.5.3. Preshift checks
• 1.5.4. Standard equipment
• 1.5.5. Special equipment
• 1.5.6. Working under load
• 1.5.7. Before leaving the truck
• 1.5.8. Loading . Transporting
• 1.6. Maintenance
• 1.6.1. General information
• 1.6.2. Inspection and maintenance data
• 1.6.3. Recommendations for consumables
• 1.6.4. Inspection and maintenance overview
• 1.6.5. Engine
• 1.6.6. Gearbox
• 1.6.7. Chassis, bodywork and fittings
• 1.6.8. Chassis frame
• 1.6.9. Controls
• 1.6.10. Electrics
• 1.6.11. Hydraulics
• 1.6.12. Load lift system
• 1.6.13. Selfhelp
• 1.6.14. Shutting down
• 1.7. Technical data
• 1.7.1. Overview of dimensions
• 1.7.2. H 50 D type sheet
• 1.7.3. H 60 D type sheet
• 1.7.4. H 70 D type sheet
• 1.7.5. H 80 D type sheet
• 1.7.6. H 80 D.900 type sheet
• 1.7.7. H 80 D.1100 type sheet
• 1.7.8. Lift mast data type 195
• 1.7.9. Truck configuration
• 1.7.10. Tyre variants and rim sizes
• 1.7.11. Load capacity diagrams
• 1.7.12. Additional capacity rating plate for attachments
• 1.7.13. Noise emission values
• 1.7.14. Vibration characteristic values for bodily vibrations
• 2. LPG truckH50T, H60T, H70T, H80T
• 2.1. Table of content
• 2.2. Introduction
• 2.2.1. Your forklift truck
• 2.2.2. Intended use
• 2.2.3. Impermissible use
• 2.2.4. Description of use and climatic conditions
• 2.2.5. Symbols used
• 2.2.6. Technical description
• 2.2.7. Taking delivery of the industrial truck
• 2.2.8. Legal requirements for placing on the market
• 2.3. Safety
• 2.3.1. Safety guidelines
• 2.3.2. Residual risks
• 2.3.3. Stability
• 2.3.4. In the case of tipover
• 2.3.5. Handling consumables
• 2.3.6. Competent person
• 2.3.7. Regulations
• 2.3.8. Safety information on the LPG system
• 2.3.9. Safety guidelines for LPG (extract)
• 2.3.10. Safety measures when working on ignition systems
• 2.3.11. Fit attachments
• 2.3.12. Fork carriage emergency lowering
• 2.3.13. Emergency exit with attached rear window
• 2.4. Overview
• 2.4.1. Identification plates
• 2.4.2. Truck overview
• 2.4.3. Controls
• 2.4.4. Display unit
• 2.4.5. Switch panel
• 2.5. Operation
• 2.5.1. Service plan before initial commissioning
• 2.5.2. Instructions for runningin
• 2.5.3. Preshift checks
• 2.5.4. Standard equipment
• 2.5.5. Special equipment
• 2.5.6. Working under load
• 2.5.7. Before leaving the truck
• 2.5.8. Loading . Transporting
• 2.6. Maintenance
• 2.6.1. General points
• 2.6.2. Inspection and maintenance data
• 2.6.3. Recommendations for consumables
• 2.6.4. Inspection and maintenance overview
• 2.6.5. Engine
• 2.6.6. Gearbox
• 2.6.7. Chassis, bodywork and fittings
• 2.6.8. Chassis frame
• 2.6.9. Controls
• 2.6.10. Electrics
• 2.6.11. Hydraulics
• 2.6.12. Load lift system
• 2.6.13. Selfhelp
• 2.6.14. Shutting down
• 2.7. Technical data
• 2.7.1. Overview of dimensions
• 2.7.2. H 50 T type sheet
• 2.7.3. H 60 T type sheet
• 2.7.4. H 70 T type sheet
• 2.7.5. H 80 T type sheet
• 2.7.6. H 80 T.900 type sheet
• 2.7.7. H 80 T.1100 type sheet
• 2.7.8. Lift mast data type 195
• 2.7.9. Truck configuration
• 2.7.10. Tyre variants and rim sizes
• 2.7.11. Load capacity diagrams
• 2.7.12. Additional capacity rating plate for attachments
• 2.7.13. Noise emission values
• 2.7.14. Vibration characteristic values for bodily vibrations
• 3. Linde Safety Guard
• 3.1. Table of content
• 3.2. Introduction
• 3.2.1. Linde Safety Guard assistance system
• 3.2.2. Intended use
• 3.2.3. Declaration of conformity for radio equipment
• 3.2.4. Limitations for commissioning or for the permission to operate
• 3.2.5. Symbols used
• 3.3. Safety
• 3.3.1. Safety information
• 3.3.2. Service personnel
• 3.4. Operating devices and display elements
• 3.4.1. Overview
• 3.4.2. Safety Guard display unit Truck Unit
• 3.4.3. Safety Guard Truck Unit display unit for reach trucks
• 3.4.4. Safety Guard communication unit Truck Unit Small
• 3.4.5. Interactive warning vest
• 3.4.6. Mobile warning unit for the interactive warning vest Vest Unit
• 3.4.7. Power bank
• 3.4.8. Charging station for the power bank
• 3.4.9. Safety Guard portable warning unit Portable Unit
• 3.4.10. Safety Guard charging station
• 3.4.11. Safety Guard charging station from 10.2019
• 3.4.12. Safety Guard sensor
• 3.4.13. Safety Guard static warning unit Static Unit
• 3.4.14. Safety Guard Zone radio module Zone Marker
• 3.5. Operating
• 3.5.1. Installation
• 3.5.2. Preshift checks
• 3.5.3. Operation
• 3.6. Maintenance and disposal
• 3.6.1. Maintenance
• 3.6.2. Disposal
• 3.7. Technical data
• 3.7.1. Safety Guard display unit
• 3.7.2. Safety Guard active warning vest
• 3.7.3. Safety Guard mobile warning unit
• 3.7.4. Safety Guard sensor
• 3.7.5. Safety Guard communication unit
• 3.7.6. Safety Guard static warning unit
• 3.7.7. Safety Guard Zone radio module