New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984

New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984 - Image 2

New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984 - Image 3

New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984 - Image 4

New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984 - Image 5

new holland t480f t490f t4100f t4110f tractor operation and maintenance manual 51601984 2

new holland t480f t490f t4100f t4110f tractor operation and maintenance manual 51601984 3

New Holland T4.80F, T4.90F, T4.100F, T4.110F Tractor Operation and Maintenance Manual 51601984

$20.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: 51601984
Format: PDF
Size: 29.6MB
Number of Pages: 500
Serial Number:
51601984

Category: New Holland Operator Manual PDF

Model List:
- T4.80F Tractor
- T4.90F Tractor
- T4.100F Tractor
- T4.110F Tractor

1. GENERAL INFORMATION
1.1. Note to the Owner
1.2. Intended use
1.3. ElectroMagnetic Compatibility (EMC)
1.4. Manual scope and required training level
1.5. Metric and imperial units abbreviations
1.6. Identification plates
1.7. Approval data plate
1.8. Operatorsmanual storage
1.9. Machine orientation
1.10. Exhaust Gas Recirculation (EGR) system
2. SAFETY INFORMATION
2.1. Safety rules and signal word definitions
2.2. Safety rules General information
2.3. Safety rules Maintenance
2.4. Safety rules Wheels and tires
2.5. Safety rules Explosions and fires
2.6. Safety rules Fire extinguisher
2.7. Safety rules Battery
2.8. Safety rules Operator presence system
2.9. Safety rules Power TakeOff (PTO)
2.10. Safety rules Seat belts
2.11. Safety rules Operator protective structure
2.12. Safety rules Category 2 cabin (standard)
2.13. Safety rules Category 4 cabin (if equipped)
2.14. Safety rules HVAC system
2.15. Safety rules Personal Protective Equipment (PPE)
2.16. Safety rules Do not use sign
2.17. Safety rules Application of plant protection products
2.18. Safety rules Hazardous chemicals
2.19. Safety rules Near utilities
2.20. Safety rules In the event of electrical storms
2.21. Safety rules Mounting and dismounting the machine
2.22. Safety rules Lifting and overhead loads
2.23. Ecology and the environment
2.24. Safety aspects in accordance with Regulation (EU) 1322/2014 Annex XXII and subsequent amendments and modifications
2.25. Noise level
2.26. Vibration levels
2.27. Machine stability
2.28. Decals and plates Safety signs
2.29. Towing the tractor for recovery
2.30. Tractor jacking points
2.31. Burn prevention
2.32. Emergency exit
2.33. Wheel chocks
3. CONTROLS AND INSTRUMENTS
3.1. Access to operatorsplatform
3.2. Operators seat
3.3. Forward controls
3.4. Lefthand side controls
3.5. Righthand side controls
3.6. Overhead controls
3.7. Exterior controls
3.8. Display
4. OPERATING INSTRUCTIONS
4.1. Commissioning the unit
4.2. Starting the unit
4.3. Stopping the unit
4.4. Moving the unit
5. TRANSPORT OPERATIONS
5.1. Road transport
5.2. Recovery transport
6. WORKING OPERATIONS
6.1. General information
6.2. Engine accelerator controls
6.3. Constant engine RPM
6.4. Clutch pedal
6.5. Brakes
6.6. Trailer braking systems
6.7. FourWheel Drive (4WD)
6.8. Differential lock system
6.9. Air conditioning
6.10. Cab pressurizing system
6.11. Remote control valves
6.12. Rear Power TakeOff (PTO)
6.13. Front Power TakeOff (PTO)
6.14. Rear hydraulic lift
6.15. Rear threepoint hitch
6.16. Threepoint hitch front
6.17. Towbar
6.18. Rear tow hitch
6.19. Wheels and tires
6.20. Trackadjustment
6.21. Ballasting
6.22. Power sockets
6.23. Beacon
7. MAINTENANCE
7.1. General information
7.2. Maintenance planning
7.3. As required
7.4. AT WARNING MESSAGE DISPLAY
7.5. Every 10 hours or daily
7.6. Initial 50 hours
7.7. Every 50 hours
7.8. Every 100 hours
7.9. Every 200 hours
7.10. Every 300 hours
7.11. Every 600 hours
7.12. Every 1200 hours or annually
7.13. Every 1200 hours or two years
7.14. Every two years
7.15. Every 3600 hours
7.16. Electrical system
7.17. Light adjustments
7.18. Fuse and relay locations
7.19. Storage
7.20. Calibrations
8. TROUBLESHOOTING
8.1. Fault code resolution
8.2. Symptom(s)
9. SPECIFICATIONS
9.1. Dimensions and weights
9.2. Maximum permitted loads on front and rear axle
9.3. Maximum permitted loads on towing hitch
9.4. Maximum permitted loads on drawbar
9.5. Maximum permitted loads on three point hitch
9.6. Additional equipment attachment points
9.7. Additional equipment attachment points
9.8. Midmounted implement mounting brackets
9.9. Speed table for 16×16 gearbox
9.10. Speed table for 28×16 gearbox
9.11. Speed table for 32x16gearbox
9.12. Speed table 44×16 gearbox
9.13. Capacities
9.14. Consumables
9.15. General specification
10. ACCESSORIES
10.1. Tool box Overview
10.2. Radio
10.3. Fuel cooler Overview

Rate this product