Yanmar SV05 (EP), SV08-1 (EP), ViO10-2A (EP) Micro Excavator Operation And Maintenance Manual

Description

• Model List:
  • SV05 (EP), SV08-1 (EP), ViO10-2A (EP) Micro Excavator

• 1. OPERATION
• 2. Maintenance
• 3. SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
• 4. Introduction
• 5. Safety Information
• 6. Product Overview and regulation
• 6.1. Intended uses
• 6.2. Operation License
• 6.3. Lifting
• 7. Ordering Replacement Parts and Service Call
• 7.1. Location of machine serial number plate
• 7.2. Location of engine serial number plate
• 7.3. Location of the EPA identification plate
• 7.4. Ordering replacement parts and service calls
• 8. Basic Precautions
• 8.1. Operating Precautions
• 8.1.1. Precautions before starting the engine
• 8.1.2. Precautions when traveling
• 8.1.3. Precautions when working
• 8.1.4. Precautions for parking
• 8.1.5. Attachment precautions
• 8.1.6. Precautions for transportation
• 8.1.7. Precautions for the battery
• 8.2. Precautions for Servicing
• 8.2.1. Precautions before servicing
• 8.2.2. Replacing Essential Parts Periodically
• 8.2.3. Precautions during servicing
• 8.3. Safety Messages (Warning Labels)
• 8.3.1. Location of warning labels
• 8.4. Identification of Important Parts
• 8.4.1. Overview of the machine
• 8.4.2. Controls and switches
• 9. OPERATION
• 9.1. Description of operators area
• 9.1.1. Monitor
• 9.1.2. Switch
• 9.1.3. Control levers and pedals for SV05
• 9.1.4. Control levers and pedals for SV08-1 et ViO10-2A
• 9.1.5. Storage space for the operation maintenance manual
• 9.1.6. Fuses
• 9.2. Instructions
• 9.2.1. Break in period
• 9.2.2. Checking before starting the engine
• 9.2.3. Precautions for operating the implement
• 9.2.4. Handling the rubber crawler
• 9.2.5. Handling hydraulic P.T.O.
• 9.3. Transportation
• 9.3.1. Precautions for transporting the machine
• 9.3.2. Suspending the machine
• 9.4. Long-term Storage
• 9.5. Troubleshooting
• 9.5.1. Phenomena that are not breakdowns
• 9.5.2. Troubleshooting
• 9.6. Precautions for Servicing
• 10. Maintenance
• 10.1. Basic Servicing Practices
• 10.1.1. Filter
• 10.2. Fueling, Oiling and Greasing Based on Temperature Range
• 10.2.1. Fuel and oil
• 10.2.2. Cooling water
• 10.3. Standard Tightening Torque for Bolts and Nuts
• 10.3.1. Torque table
• 10.4. Maintenance Table
• 10.4.1. Service intervals when using the hydraulic breaker
• 10.4.2. List of periodic inspection and servicing
• 10.5. Procedures for Maintenance
• 10.5.1. Checking and adjusting the rubber crawler tension
• 10.5.2. Checking and adjusting the fan belt tension
• 10.5.3. Greasing
• 10.5.4. Changing the water separator element
• 10.5.5. Changing the fuel filter element
• 10.5.6. Checking and replenishing the lube oil for the travel reduction gearbox
• 10.6. Specifications and Dimensional Diagrams
• 10.6.1. Specifications
• 10.6.2. Model view and working range
• 10.6.3. Noise emitted by the machines
• 10.6.4. Vibrations emitted by the machines
• 10.6.5. Lifting capacity
• 11. SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
• 11.1. Hydraulic and wiring diagrams
• 11.1.1. Hydraulic diagrams
• 11.1.2. Wiring diagrams
• 11.2. Maintenance
• 11.3. Notes