Yanmar SV15 (EP), SV17 (EP), SV17EX (EP) Mini Excavator Operation And Maintenance Manual

Description

• Model List:
  • SV15 (EP), SV17 (EP), SV17EX (EP) Mini Excavator

• 1. Introduction
• 2. Safety Information
• 3. Product Overview and regulation
• 3.1. Intended uses
• 3.2. Operation License
• 3.3. Lifting
• 4. Ordering Replacement Parts and Service Call
• 4.1. Location of machine serial number plate
• 4.2. Location of engine serial number plate
• 4.3. Location of the EPA identification plate
• 4.4. Ordering replacement parts and service calls
• 4.5. Basic Precautions
• 4.6. Operating Precautions
• 4.6.1. Precautions before starting the engine
• 4.6.2. Precautions when traveling
• 4.6.3. Precautions when working
• 4.6.4. Precautions for parking
• 4.6.5. Attachment precautions
• 4.6.6. Precautions for transportation
• 4.6.7. Precautions for the battery
• 4.7. Precautions for Servicing
• 4.7.1. Precautions before servicing
• 4.7.2. Replacing Essential Parts Periodically
• 4.7.3. Precautions during servicing
• 4.8. Safety Messages (Warning Labels)
• 4.8.1. Location of warning labels
• 5. OPERATION
• 5.1. Identification of Important Parts
• 5.1.1. Overview of the machine
• 5.1.2. Controls and switches
• 5.2. Description of operators area
• 5.2.1. Monitor (depending on model)
• 5.2.2. Switches (depending on model)
• 5.2.3. Control levers and pedals
• 5.2.4. Storage space for the toolkit and operation maintenance manual (depending on model)
• 5.2.5. Operators seat
• 5.2.6. Fuses
• 5.2.7. Windshield (for cabin)
• 5.2.8. Air outlet (for cabin)
• 5.2.9. Ash tray (for cabin)
• 5.2.10. Right window glass (for cabin)
• 5.2.11. Cabin side door
• 5.2.12. Replenishment of windshield washer fluid (for cabin)
• 5.3. Instructions
• 5.3.1. Break in period
• 5.3.2. Checking before starting the engine
• 5.3.3. Precautions for operating the implement
• 5.3.4. Handling the rubber crawler
• 5.3.5. Handling hydraulic P.T.O.
• 5.4. Transportation
• 5.4.1. Precautions for transporting the machine
• 5.4.2. Suspending the machine
• 5.5. Long-term Storage
• 5.6. Troubleshooting
• 5.6.1. Phenomena that are not breakdowns
• 5.6.2. Troubleshooting
• 6. Maintenance
• 6.1. Precautions for Servicing
• 6.2. Basic Servicing Practices
• 6.2.1. Filter
• 6.3. Fueling, Oiling and Greasing Based on Temperature Range
• 6.3.1. Fuel and oil
• 6.3.2. Cooling water
• 6.4. Standard Tightening Torque for Bolts and Nuts
• 6.4.1. Torque table
• 6.5. Maintenance Table
• 6.5.1. Service intervals when using the hydraulic breaker
• 6.5.2. List of periodic inspection and servicing
• 6.6. Procedures for Maintenance
• 6.6.1. Checking and adjusting the rubber crawler tension
• 6.6.2. Checking and adjusting the fan belt tension
• 6.6.3. Greasing
• 6.6.4. Greasing the swing gear and the swing bearing
• 6.6.5. Greasing track gauge change cylinder
• 6.6.6. Changing the water separator element
• 6.6.7. Changing the fuel filter element
• 6.6.8. Checking and replenishing the lube oil for the travel reduction gearbox
• 7. SPECIFICATIONS
• 7.1. Specifications
• 7.1.1. Specifications
• 7.1.2. Model view and working range (Cabin / Canopy)
• 7.1.3. Noise emitted by the machines
• 7.1.4. Vibrations emitted by the machines
• 7.1.5. Lifting capacity
• 7.2. Options
• 7.2.1. Options
• 7.3. Hydraulic and wiring diagrams
• 7.3.1. Hydraulic diagrams
• 7.3.2. Wiring diagrams
• 7.4. Maintenance
• 7.5. Notes