Yanmar ViO27-2, ViO35-2 Excavator Operation And Maintenance Manual

Description

• Model List:
  • ViO27-2, ViO35-2 Excavator

• 1. Introduction
• 2. Safety Information
• 3. Product Overview
• 3.1. Intended uses
• 3.2. Break in period
• 3.3. Conditions to insure compliance with EPA emission standards Conditions de conformité avec les standards démission EPA
• 4. Operation License
• 5. Ordering Replacement Parts and Service Call
• 5.1. Location of machine serial number plate
• 5.2. Location of engine serial number plate
• 5.3. Location of EPA emission control plate Localisation de la plaque signalétique EPA
• 5.4. Warranty term of the exhaust emission control system and parts Durée de garantie pour lensemble et les pièces du système de contrôle déchappement
• 5.5. Ordering replacement parts and service calls
• 6. Contents
• 7. Basic Precautions
• 8. Operating Precautions
• 8.1. Precautions before starting the engine
• 8.2. Precautions for starting the engine, working and parking
• 8.3. Precautions for transportation
• 8.4. Precautions for the battery
• 8.5. Precautions for towing
• 8.6. Precautions for hooked bucket
• 9. Precautions for Servicing
• 9.1. Precautions before servicing
• 9.2. Precautions during servicing
• 10. Safety Messages (Warning Labels)
• 10.1. Location of warning labels
• 11. OPERATION
• 12. Identification of Important Parts
• 12.1. Overview of the machine
• 12.2. Controls and switches
• 13. Description of Control Devices
• 13.1. Monitor
• 13.2. Switch
• 13.3. Control levers and pedals
• 13.4. Engine hood B
• 13.5. Engine hood rear cover
• 13.6. Storage space for the operation maintenance manual
• 13.7. Windshield (for cabin)
• 13.8. Operators seat
• 13.9. Ash tray (for cabin)
• 13.10. Headlight
• 13.11. Air outlet (for cabin)
• 13.12. Right window glass (for cabin)
• 13.13. Cabin side door
• 13.14. Replenishment of windshield washer fluid
• 13.15. Fuse
• 13.16. Power outlet
• 14. Operating Instructions
• 14.1. Checking before starting the engine
• 14.2. Starting up the engine
• 14.3. Operating and checking instructions after starting the engine
• 14.4. Traveling
• 14.5. Steering
• 14.6. Stopping the machine
• 14.7. Swinging the upperstructure
• 14.8. Operating the implements
• 14.9. Precautions for operating the implement
• 14.10. Precautions for working
• 14.11. Precautions for going up and down a slope
• 14.12. Escaping from the mud
• 14.13. Operations using the bucket
• 14.14. Handling quick coupler
• 14.15. Parking the machine
• 14.16. Inspection requirements after completing operation
• 14.17. Stopping the engine
• 14.18. Inspection requirements after stopping the engine
• 14.19. Locking
• 14.20. Handling the rubber track (for rubber track type)
• 14.21. Handling hydraulic P.T.O.
• 14.22. Replacing the bucket without the quick coupler
• 15. Transportation
• 15.1. Loading and unloading the machine
• 15.2. Precautions for loading the machine
• 15.3. Precautions for transporting the machine
• 15.4. Suspending the machine
• 16. Care and Service in Cold Weather
• 16.1. Preparing for cold weather
• 16.2. Precautions after a days work
• 16.3. After cold weather ends
• 17. Long-term Storage
• 17.1. Before storing
• 17.2. Storing
• 17.3. Using the machine again
• 18. Troubleshooting
• 18.1. Phenomena that are not breakdowns
• 18.2. Towing
• 18.3. If the battery is overdischarged
• 18.4. Troubleshooting
• 19. MAINTENANCE
• 20. Precautions for Servicing
• 21. Basic Servicing Practices
• 21.1. Oils, fuel, and cooling water
• 21.2. Electrical equipment
• 21.3. Hydraulic system
• 22. Consumables
• 23. Fueling, Oiling and Greasing Based on Temperature Range
• 23.1. Fuel and oil
• 23.2. Cooling water
• 24. Standard Tightening Torque for Bolts and Nuts
• 24.1. Required tools
• 24.2. Torque table
• 25. Replacing Essential Parts Periodically
• 26. Maintenance Table
• 26.1. Table of service time intervals
• 26.2. Service intervals when using the hydraulic breaker
• 27. Procedures for Maintenance
• 27.1. First services
• 27.2. Nonperiodic services
• 27.3. Checking before start-up
• 27.4. Maintenance every 50 service hours
• 27.5. Maintenance every 100 service hours
• 27.6. Maintenance every 250 service hours
• 27.7. Maintenance every 500 service hours
• 27.8. Maintenance every 1000 service hours
• 27.9. Maintenance every 2000 service hours
• 28. SPECIFICATIONS AND DIMENSIONAL DIAGRAMS
• 29. Specifications and Dimensional Diagrams
• 30. OPTIONAL PARTS AND ATTACHMENTS
• 31. General Precautions
• 31.1. Safety precautions
• 31.2. Precautions for mounting an attachment (implement)
• 32. Handling the Hooked Bucket
• 32.1. Checking the hooked bucket for damage
• 32.2. Prohibitions
• 32.3. Precautions
• 33. Optional Parts and Attachments
• 33.1. Optional parts and attachments
• 34. Handling Air Conditioner (for Cabin)
• 34.1. Description of lever and switches for air conditioner
• 34.2. How to use air conditioner
• 34.3. Maintenance, inspection and servicing of air conditioner
• 35. Maintenance Log
• 36. Notes
• 37. BACK COVER