Komatsu MX352 Hydraulic Excavator Operation and Maintenance Manual SEAM061600T

Description

• Model List:
  • MX352 Hydraulic Excavator

• 1. MAIN MENU
• 2. COVER
• 3. FOREWORD
• 3.1. FOREWORD
• 3.2. SAFETY INFORMATION
• 3.3. INTRODUCTION
• 3.3.1. DIRECTIONS OF MACHINE
• 3.4. PRODUCT INFORMATION
• 3.4.1. PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
• 3.4.2. ENGINE SERIAL NUMBER PLATE AND ITS LOCATION
• 3.4.3. EMISSION CONTROL INFORMATION LABEL AND ITS LOCATION
• 3.4.4. SERVICE METER LOCATION
• 3.4.5. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
• 3.5. CONTENTS
• 4. CONTENTS
• 5. SAFETY
• 5.1. SAFETY INFORMATION
• 5.2. SAFETY LABELS
• 5.2.1. LOCATION OF SAFETY LABELS
• 5.2.2. SAFETY LABELS
• 5.3. SAFETY INFORMATION
• 5.4. SAFETY MACHINE OPERATION
• 5.4.1. STARTING ENGINE
• 5.4.2. OPERATION
• 5.4.3. TRANSPORTATION
• 5.4.4. BATTERY
• 5.4.5. TOWING
• 5.4.6. LIFTING OBJECTS WITH BUCKET
• 5.5. SAFETY MAINTENANCE INFORMATION
• 6. OPERATION
• 6.1. MACHINE VIEW ILLUSTRATIONS
• 6.1.1. OVERALL MACHINE VIEW
• 6.1.2. CONTROLS AND GAUGES
• 6.2. DETAILED CONTROLS AND GAUGES
• 6.2.1. MONITORING SYSTEM
• 6.2.1.1. Emergency Monitors
• 6.2.1.2. Meter Display Portion
• 6.2.1.3. Pilot Lamps
• 6.2.1.4. Monitor Switches Portion
• 6.2.2. SWITCHES
• 6.2.3. CONTROL LEVERS AND PEDALS
• 6.2.4. WINDSHIELD
• 6.2.5. SLIDING DOOR
• 6.2.6. SLIDING WINDOW
• 6.2.7. EMERGENCY ESCAPE HAMMER
• 6.2.8. COVER WITH LOCK
• 6.2.8.1. Opening and Closing Covers with Lock
• 6.2.9. ENGINE REAR COVER
• 6.2.10. COOLING COVER
• 6.2.11. MUD COVER
• 6.2.12. METHOD OF OPENING (TILTING) FLOOR
• 6.2.13. FUSE
• 6.2.14. BLOCK FUSE
• 6.2.15. OPERATION MANUAL STORAGE
• 6.2.16. TOOL BOX
• 6.2.17. GREASE GUN HOLDER
• 6.2.18. ASHTRAY
• 6.3. MACHINE OPERATIONS AND CONTROLS
• 6.3.1. BEFORE STARTING ENGINE
• 6.3.1.1. Walkaround Checks
• 6.3.1.2. Checks Before Starting
• 6.3.1.3. Adjustment
• 6.3.1.4. Seat Belt
• 6.3.1.5. Operations Before Starting Engine
• 6.3.2. STARTING ENGINE
• 6.3.2.1. Normal Starting
• 6.3.2.2. Starting Engine in Cold Weather
• 6.3.3. AFTER STARTING ENGINE
• 6.3.3.1. Breakingin the New Machine
• 6.3.3.2. Warmingup Operation
• 6.3.4. STOPPING THE ENGINE
• 6.3.5. MACHINE OPERATION
• 6.3.5.1. Preparations for Moving the Machine Off
• 6.3.5.2. Moving Machine Forward
• 6.3.5.3. Moving Machine Backward
• 6.3.5.4. Stopping Machine
• 6.3.6. STEERING THE MACHINE
• 6.3.6.1. Steering
• 6.3.7. SWINGING
• 6.3.8. WORK EQUIPMENT CONTROLS AND OPERATIONS
• 6.3.9. PROHIBITED OPERATIONS
• 6.3.10. GENERAL OPERATION INFORMATION
• 6.3.11. TRAVELING ON SLOPES
• 6.3.12. ESCAPE FROM MUD
• 6.3.12.1. Stuck One Side of Track
• 6.3.12.2. Stuck Both Sides of Tracks
• 6.3.13. WORK POSSIBLE USING COMPACT HYDRAULIC EXCAVATOR
• 6.3.13.1. Backhoe work
• 6.3.13.2. Ditching work
• 6.3.13.3. Loading work
• 6.3.13.4. Smoothing work
• 6.3.13.5. Side ditching work
• 6.3.14. BUCKET REPLACEMENT
• 6.3.15. PARKING MACHINE
• 6.3.16. MACHINE INSPECTION AFTER DAILY WORK
• 6.3.16.1. Before stop engine
• 6.3.16.2. After stop engine
• 6.3.17. LOCKING
• 6.3.18. RUBBER SHOES AND ROAD LINERS
• 6.3.18.1. Rubber Shoes and Road Liners Information
• 6.3.18.2. Warranty for Rubber Shoes and Road Liners
• 6.3.18.3. Using Rubber Shoes and Road Liners
• 6.3.18.4. Long Life Operations
• 6.4. TRANSPORTATION
• 6.4.1. TRANSPORTATION PROCEDURE
• 6.4.2. LOADING AND UNLOADING WITH TRAILER
• 6.4.2.1. Loading
• 6.4.2.2. Securing Machine
• 6.4.2.3. Unloading
• 6.4.3. LIFTING MACHINE
• 6.5. COLD WEATHER OPERATION
• 6.5.1. COLD WEATHER OPERATION INFORMATION
• 6.5.1.1. Fuel and Lubricants
• 6.5.1.2. Cooling System Coolant
• 6.5.1.3. Battery
• 6.5.2. CAB HEATER IN COLD WEATHER
• 6.5.3. AFTER DAILY WORK COMPLETION
• 6.5.4. AFTER COLD WEATHER SEASON
• 6.6. LONG TERM STORAGE
• 6.6.1. BEFORE STORAGE
• 6.6.2. DURING STORAGE
• 6.6.3. AFTER STORAGE
• 6.7. TROUBLES AND ACTIONS
• 6.7.1. RUNNING OUT OF FUEL
• 6.7.2. PHENOMENA THAT ARE NOT FAILURES
• 6.7.3. TOWING THE MACHINE
• 6.7.4. SEVERE JOB CONDITION
• 6.7.5. DISCHARGED BATTERY
• 6.7.5.1. Battery Removal and Installation
• 6.7.5.2. Battery Charges
• 6.7.5.3. Starting Engine with Booster Cables
• 6.7.6. OTHER TROUBLE
• 6.7.6.1. Electrical System
• 6.7.6.2. Chassis
• 6.7.6.3. Engine
• 7. MAINTENANCE
• 7.1. MAINTENANCE INFORMATION
• 7.2. LUBRICANTS, COOLANT AND FILTERS
• 7.2.1. HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
• 7.2.1.2. Fuel
• 7.2.1.3. Cooling System Coolant
• 7.2.1.4. Grease
• 7.2.1.5. Carrying Out KOWA (Komatsu Oil Wear Analysis)
• 7.2.1.6. Oil and Fuel Storage
• 7.2.1.7. Filters
• 7.2.2. ELECTRIC SYSTEM MAINTENANCE
• 7.2.3. HANDLING HYDRAULIC SYSTEM
• 7.3. WEAR PARTS
• 7.3.1. WEAR PARTS LIST
• 7.4. LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS
• 7.5. TIGHTENING TORQUE SPECIFICATIONS
• 7.5.1. TIGHTENING TORQUE LIST
• 7.6. SAFETY CRITICAL PARTS
• 7.6.1. SAFETY CRITICAL PARTS LIST
• 7.7. MAINTENANCE SCHEDULE
• 7.7.1. MAINTENANCE SCHEDULE CHART
• 7.7.2. MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER
• 7.8. MAINTENANCE PROCEDURE
• 7.8.1. WHEN REQUIRED
• 7.8.1.1. CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
• 7.8.1.2. CLEAN INSIDE OF COOLING SYSTEM
• 7.8.1.3. CHECK LEVEL OF BATTERY ELECTROLYTE
• 7.8.1.4. CLEAN WATER SEPARATOR ELEMENT
• 7.8.1.5. DRAIN WATER AND SEDIMENT FROM FUEL TANK
• 7.8.1.6. CHECK AND TIGHTEN TRACK SHOE BOLTS
• 7.8.1.7. CHECK AND ADJUST TRACK TENSION
• 7.8.1.8. CHECK, RUBBER SHOES OR ROAD LINERS
• 7.8.1.9. CHECK AND ADJUST RUBBER SHOE TENSION
• 7.8.1.10. REPLACE RUBBER SHOES
• 7.8.1.11. REPLACE ROAD LINERS
• 7.8.1.12. REPLACE BUCKET TEETH
• 7.8.1.13. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
• 7.8.1.14. CHECK, CLEAN AND LUBRICATE CAB SLIDE DOOR RAIL AND ROLLER
• 7.8.1.15. LUBRICATING
• 7.8.1.16. BLEEDING AIR FROM HYDRAULIC SYSTEM
• 7.8.2. CHECK BEFORE STARTING
• 7.8.3. EVERY 500 HOURS MAINTENANCE
• 7.8.3.1. LUBRICATING
• 7.8.3.2. CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE
• 7.8.3.3. REPLACE FUEL FILTER CARTRIDGE
• 7.8.3.4. CHECK OIL LEVEL IN FINAL DRIVE CASE, ADD OIL
• 7.8.3.5. CLEAN AND INSPECT RADIATOR FINS AND OIL COOLER FINS
• 7.8.3.6. CHECK AND ADJUST COOLING FAN BELT TENSION
• 7.8.4. EVERY 1000 HOURS MAINTENANCE
• 7.8.4.1. REPLACE HYDRAULIC OIL FILTER ELEMENT
• 7.8.4.2. CHANGE OIL IN FINAL DRIVE CASE
• 7.8.4.3. CHECK ENGINE VALVE CLEARANCE, ADJUST
• 7.8.5. EVERY 2000 HOURS MAINTENANCE
• 7.8.5.1. CHANGE OIL IN HYDRAULIC TANK, CLEAN STRAINER
• 7.8.5.2. CHECK ALTERNATOR, STARTING MOTOR
• 8. SPECIFICATIONS
• 8.1. SPECIFICATIONS
• 9. ATTACHMENTS AND OPTIONS
• 9.1. ATTACHMENTS AND OPTIONS GENERAL INFORAMTION
• 9.1.1. SAFETY FIRST
• 9.1.2. ATTACHMENT INSTALLATION
• 9.2. BUCKET WITH HOOK
• 9.2.1. PROHIBITED OPERATIONS
• 9.3. AIR CONDITIONER
• 9.3.1. CONTROL PANEL AND COMPONENTS
• 9.3.2. AIR CONDITIONER CONTROLS
• 9.3.3. AIR CONDITIONER MAINTENANCE
• 9.3.3.1. When Required
• 9.3.3.2. Every 250 Hours Maintenance
• 9.3.3.3. Every 500 Hours Maintenance
• 9.4. RADIO
• 9.4.1. CONTROL PANEL
• 9.4.2. CONTROLS OF RADIO
• 9.4.2.1. Listening to radio
• 9.4.2.2. Automatic Tuning
• 9.4.2.3. Manual Tuning
• 9.4.2.4. Preset Station Buttons
• 9.4.2.5. Using auto memory
• 9.4.2.6. Time Adjustment
• 9.4.2.7. Automatic selection of reception for monaural/stereo
• 9.4.2.8. Antenna
• 9.4.3. CARE FOR RADIO
• 9.5. WINDSHIELD WASHER
• 9.5.1. WINDSHIELD WASHER OPERATION
• 9.5.2. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
• 9.6. MACHINE READY FOR ATTACHMENT
• 9.6.1. LOCATIONS
• 9.6.2. HYDRAULIC CIRCUIT
• 9.6.2.1. Hydraulic Circuit Connection
• 9.6.3. ATTACHMENT OPERATIONS
• 9.6.3.1. When Using Breaker
• 9.6.3.2. When Using General Attachment Such as Crusher
• 9.6.4. LONG TERM STORAGE
• 9.6.5. SPECIFICATIONS
• 9.7. CHANGING MACHINE CONTROL PATTERN (IF PATTERN CHANGE VALVE EQUIPPED)
• 9.7.1. CONTROL PATTERN CHANGE PROCEDURE
• 9.7.2. MACHINE CONTROL PATTERNS
• 9.8. ATTACHMENT GUIDE
• 9.8.1. ATTACHMENT COMBINATIONS
• 9.9. RECOMMENDED ATTACHMENT OPERATIONS
• 9.9.1. HYDRAULIC BREAKER