Bomag BF 700 C-2 Paver Operating and Maintenance Instructions 00820030

Description

• Model List:
  • BF 700 C-2 Paver

• 1. Table of contents
• 2. Introduction
• 2.1. Foreword
• 2.2. Machine type plate and engine type plate
• 3. Technical data
• 3.1. Noise and vibration data
• 4. Concerning your safety
• 4.1. General prerequisites
• 4.2. Definition of responsible persons
• 4.3. Basic safety regulations for safe operation
• 4.4. Handling fuels and lubricants
• 4.5. Loading/transporting the machine
• 4.6. Taking the machine into service
• 4.7. Driving the machine, working operation
• 4.8. Refuelling
• 4.9. Topping up AdBlue/DEF
• 4.10. What to do in events of emergency
• 4.11. Maintenance work
• 4.12. Repair
• 4.13. Stickers and decals
• 5. Display and control elements
• 5.1. Operators stand
• 5.2. Outside of machine
• 5.3. Outside control panels
• 5.4. Screed operating console
• 5.5. Operating console for screed heating
• 6. Tests before taking into operation
• 6.1. Notes on safety
• 6.2. Visual inspections and function tests
• 6.3. Checking the engine oil level
• 6.4. Checking the fuel level, topping up fuel
• 6.5. Checking the AdBlue/DEF level, topping up
• 6.6. Checking the hydraulic oil level
• 6.7. Checking the coolant level
• 6.8. Checking the emulsion level, topping up
• 6.9. Lubricating the machine
• 6.10. Check the grease supply in the central lubrication system
• 7. Operation
• 7.1. Settingup the work place
• 7.2. Start the engine
• 7.3. Driving the machine in transport mode
• 7.4. Braking the machine
• 7.5. Preparing for work
• 7.6. Operation
• 7.7. Park the machine in secured condition.
• 7.8. Adjusting the auger height
• 7.9. Operating the screed
• 7.10. Operating the screed heating
• 7.11. Operating the protection roof
• 7.12. Emergency procedures
• 8. Loading / transporting the machine
• 8.1. Prepare for transport
• 8.2. Loading the machine
• 8.3. Lashing the machine to the transport vehicle
• 8.4. Loading by crane
• 9. Maintenance
• 9.1. Preliminary remarks and safety notes
• 9.2. Overview of maintenance flaps and doors
• 9.3. Fuels and lubricants
• 9.4. List of fuels and lubricants
• 9.5. Runningin instructions
• 9.6. Maintenance table
• 9.7. Every 50 operating hours
• 9.8. Every 250 operating hours
• 9.9. Every 500 operating hours
• 9.10. Every 1000 operating hours
• 9.11. Every 2000 operating hours
• 9.12. As required
• 10. Troubleshooting
• 10.1. Preliminary remarks
• 10.2. Starting the engine with jump leads
• 10.3. Screed heating fault code display
• 10.4. Fuse assignment
• 10.5. Fault code display in the LCDisplay unit
• 10.6. Engine faults
• 11. Waste disposal
• 11.1. Final shutdown of machine
• 12. List of special tools