Bomag BM 2200-75 Cold Planer Operating and Maintenance Instructions 00820166

Description

• Model List:
  • BM 2200-75 Cold Planer

• 1. Table of contents
• 2. Introduction
• 2.1. Foreword
• 2.2. Machine type plate and engine type plate
• 3. Technical data
• 3.1. Noise and vibration data
• 4. Concerning your safety
• 4.1. Basic prerequisites
• 4.2. Definition of responsible persons
• 4.3. Basic safety regulations for safe operation
• 4.4. Handling fuels and lubricants
• 4.5. Loading / transporting the machine
• 4.6. Start up procedure
• 4.7. Driving the machine working operation
• 4.8. Refuelling
• 4.9. Emergency procedures
• 4.10. Maintenance work
• 4.11. Repair
• 4.12. Signage
• 5. Indicators and control elements
• 5.1. Drivers stand
• 5.2. Machine
• 6. Checks prior to start up
• 6.1. Notes on safety
• 6.2. Visual inspections and function tests
• 6.3. Checking the engine oil level
• 6.4. Checking the fuel level, topping up fuel
• 6.5. Checking the hydraulic oil level
• 6.6. Checking the coolant level
• 6.7. Checking the water spraying system
• 6.8. Checking the wear items of the milling unit
• 6.9. Checking the track pads
• 6.10. Checking condition and tension of conveyor belts
• 6.11. Checking safety rope and chain
• 6.12. Lubricating the machine
• 6.13. Checking the compressor oil level
• 6.14. Checking the engine oil level (Hatz)
• 7. Operation
• 7.1. Setting up the workplace
• 7.2. Starting the engine
• 7.3. Steering the machine
• 7.4. Driving the machine
• 7.5. Milling operation
• 7.6. Parking the machine in secured condition
• 7.7. Operating the scraper
• 7.8. Folding the conveyor belt
• 7.9. Operating the high pressure cleaner
• 7.10. Operating the extraction system
• 7.11. Outer display
• 7.12. Operating the levelling system
• 7.13. Operating the camera
• 7.14. Emergency procedures
• 8. Loading / transporting the machine
• 8.1. Prepare for transport
• 8.2. Transporting the milling box separately
• 8.3. Loading the machine
• 8.4. Lashing the machine to the transport vehicle
• 8.5. Loading by crane
• 8.6. After transport
• 9. Maintenance
• 9.1. Preliminary remarks and safety notes
• 9.2. Preparations/concluding work
• 9.3. Fuels and lubricants
• 9.4. List of fuels and lubricants
• 9.5. Runningin instructions
• 9.6. Maintenance Table
• 9.7. Every 250 operating hours
• 9.8. Every 500 operating hours
• 9.9. Every 1000 operating hours
• 9.10. Every 2000 operating hours
• 9.11. As required
• 10. Troubleshooting
• 10.1. Preliminary remarks
• 10.2. Starting the engine with jump leads
• 10.3. Fuse assignment
• 10.4. Fault code display
• 10.5. Measuring value display
• 10.6. Engine faults
• 10.7. Engine faults (Hatz)
• 11. Disposal
• 11.1. Final shutdown of machine
• 12. List of special tools