Bomag BW 202 AD-5 Tandem Vibratory Roller Operating and Maintenance Instructions 00820077

Description

• Model List:
  • BW 202 AD-5 Tandem Vibratory Roller

• 1. Table of contents
• 2. Introduction
• 2.1. Foreword
• 2.2. Machine type plate and engine type plate
• 3. Technical data
• 3.1. Noise and vibration data
• 4. Concerning your safety
• 4.1. General prerequisites
• 4.2. Terminological definition of the responsible persons
• 4.3. Fundamentals for safe operation
• 4.4. Safety regulations and environmental protection regulations when handling fuels and lubricants
• 4.5. Load/transport the machine
• 4.6. Taking the machine into service
• 4.7. Driving the machine, working operation
• 4.8. Refuelling
• 4.9. DPFregeneration
• 4.10. What to do in events of emergency
• 4.11. Maintenance work
• 4.12. Repair
• 4.13. Information and safety stickers/decals on the machine
• 5. Display and control elements
• 5.1. Operators stand
• 5.2. Cabin
• 5.3. ROPS
• 5.4. Engine compartment
• 5.5. Precision spreader
• 6. Tests before taking into operation
• 6.1. Notes on safety
• 6.2. Visual inspections and function tests
• 6.3. Checking the engine oil level
• 6.4. Checking the fuel level, topping up fuel
• 6.5. Checking the hydraulic oil level
• 6.6. Check the coolant level
• 6.7. Checking the water level, topping up
• 6.8. Checking, adjusting the scrapers
• 6.9. Checking the precision spreader, cleaning the spreading beam
• 7. Operation
• 7.1. Setup the work place
• 7.2. Electronic immobilizer
• 7.3. Start the engine
• 7.4. Travel operation
• 7.5. Working with vibration
• 7.6. Operating the crabwalk
• 7.7. Operating the pressure sprinkler system
• 7.8. Park the machine in secured condition.
• 7.9. Open the engine hood
• 7.10. Operating the heating/air conditioning system
• 7.11. DPFregeneration
• 7.12. Edge cutter
• 7.13. Precision spreader
• 7.14. What to do in events of emergency
• 8. Loading/transporting the machine
• 8.1. Prepare for transport
• 8.2. Load the machine
• 8.3. Lashing the machine to the transport vehicle
• 8.4. Loading by crane
• 8.5. After transport
• 8.6. Engaging / releasing the articulation lock
• 9. Maintenance
• 9.1. Preliminary remarks and safety notes
• 9.2. Fuels and lubricants
• 9.3. Table of fuels and lubricants
• 9.4. Runningin instructions
• 9.5. Maintenance table
• 9.6. Every 50 operating hours
• 9.7. Every 250 operating hours
• 9.8. Every 500 operating hours
• 9.9. Every 1000 operating hours
• 9.10. Every 2000 operating hours
• 9.11. Every 3000 operating hours
• 9.12. As required
• 10. Trouble shooting
• 10.1. Preliminary remarks
• 10.2. Starting the engine with jump leads
• 10.3. Fuse assignment
• 10.4. Engine faults
• 11. Disposal
• 11.1. Final shutdown of machine
• 12. List of special tools