Bomag BW 206 AD-5 Tandem Vibratory Roller Operating and Maintenance Instructions 00820061

Description

• Model List:
  • BW 206 AD-5 Tandem Vibratory Roller

• 1. Table of contents
• 2. Introduction
• 2.1. Foreword
• 2.2. Machine type plate and engine type plate
• 3. Technical data
• 3.1. Noise and vibration data
• 4. Concerning your safety
• 4.1. General prerequisites
• 4.2. Definition of responsible persons
• 4.3. Fundamentals for safe operation
• 4.4. Handling fuels and lubricants
• 4.5. Loading / transporting the machine
• 4.6. Startup procedure
• 4.7. Driving the machine, working operation
• 4.8. Refuelling
• 4.9. Topping up AdBlue/DEF
• 4.10. Emergency procedures
• 4.11. Maintenance work
• 4.12. Repair
• 4.13. Signage
• 5. Indicators and control elements
• 5.1. Drivers stand
• 5.2. Cabin
• 5.3. ROPS
• 5.4. Engine compartment
• 5.5. Outside of machine
• 5.6. Fire extinguisher
• 6. Indicators and control elements with swivel seat
• 6.1. Drivers stand
• 6.2. ROPS
• 6.3. Engine compartment
• 6.4. Fire extinguisher
• 7. Checks prior to start up
• 7.1. Notes on safety
• 7.2. Visual inspections and function tests
• 7.3. Checking the engine oil level
• 7.4. Checking the fuel level, topping up fuel
• 7.5. Checking the AdBlue/DEF level, topping up
• 7.6. Checking the hydraulic oil level
• 7.7. Checking the coolant level
• 7.8. Checking the water level, topping up
• 7.9. Checking, adjusting the scrapers
• 8. Operation
• 8.1. Setting up the work place
• 8.2. Setting up the work place with swivel seat
• 8.3. Electronic immobilizer
• 8.4. Starting the engine
• 8.5. Travel operation
• 8.6. Working with vibration
• 8.7. ECONOMIZER
• 8.8. Using the crabwalk
• 8.9. Water spraying system
• 8.10. Parking the machine in secured condition
• 8.11. Operating the heating / air conditioning system
• 8.12. Edge cutter
• 8.13. ECOSTOP
• 8.14. Emergency procedures
• 9. Loading / transporting the machine
• 9.1. Prepare for transport
• 9.2. Loading the machine
• 9.3. Lashing the machine to the transport vehicle
• 9.4. Loading by crane
• 9.5. After transport
• 10. Maintenance
• 10.1. Preliminary remarks and safety notes
• 10.2. Preparations / concluding work
• 10.3. Fuels and lubricants
• 10.4. List of fuels and lubricants
• 10.5. Runningin instructions
• 10.6. Maintenance Table
• 10.7. Every 250 operating hours
• 10.8. Every 500 operating hours
• 10.9. Every 1000 operating hours
• 10.10. Every 2000 operating hours
• 10.11. Every 6000 operating hours
• 10.12. As required
• 11. Troubleshooting
• 11.1. Preliminary remarks
• 11.2. Starting the engine with jump leads
• 11.3. Fuse assignment
• 11.4. Engine malfunctions
• 12. Disposal
• 12.1. Final shutdown of machine
• 13. List of special tools