Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404
Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404 - Image 2
Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404 - Image 3
Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404 - Image 4
Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404 - Image 5

Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404

$30.00

  • Type Of Manual: Operation and Maintenance Manual
  • Manual ID: CEAM026404
  • Format: PDF
  • Size: 3.5MB
  • Number of Pages: 206
Category:

Description

  • Model List:

    • 960E-2K Dump Truck
  • 1. Contents
  • 2. INTRODUCTION
  • 2.1. WARNINGS
  • 2.2. FOREWORD
  • 2.3. ABOUT THIS MANUAL
  • 2.4. ALERTS
  • 2.5. TRUCK MODEL ILLUSTRATION
  • 2.6. NONOEM PARTS IN CRITICAL SYSTEMS
  • 3. STANDARD CHARTS AND TABLES
  • 3.1. GENERAL INFORMATION
  • 3.2. STANDARD TIGHTENING TORQUES
  • 3.3. CONVERSION MULTIPLIERS
  • 4. GENERAL SAFETY
  • 4.1. GENERAL SAFETY
  • 4.2. PRECAUTIONS FOR TRUCK OPERATION
  • 4.3. OPERATING THE MACHINE
  • 4.3.1. EXTERIOR LIGHTING
  • 4.4. PRECAUTIONS FOR MAINTENANCE
  • 4.4.1. BEFORE PERFORMING MAINTENANCE
  • 4.4.1.1. Securing the Dump Body
  • 4.4.2. DURING MAINTENANCE
  • 4.5. BATTERY HAZARD PREVENTION
  • 4.6. WHEN REPAIRS ARE NECESSARY
  • 4.7. SPECIAL PRECAUTIONS
  • 5. WARNING AND CAUTIONS
  • 5.1. GENERAL INFORMATION
  • 5.2. PIN PLATE
  • 5.3. GRADE SPEED CHART
  • 5.4. GREASE POINTS
  • 5.5. MACHINE SAFETY
  • 5.6. KEY SWITCH
  • 5.7. OIL FILL AND CHECK
  • 5.8. HIGH PRESSURES
  • 5.9. BATTERIES
  • 5.10. HIGH VOLTAGE
  • 5.11. WELDING
  • 5.12. EMERGENCY DUMPING
  • 5.13. AUTOMATIC LUBRICATION FILL
  • 5.14. ROPS/FOPS
  • 5.15. TOWING
  • 5.16. SEAT WEIGHT CAPACITY
  • 5.17. LUBRICATION CHART
  • 6. OPERATING INSTRUCTIONS
  • 6.1. PREPARING FOR OPERATION
  • 6.2. PRESHIFT BRAKE TEST
  • 6.3. TRUCK OPERATION
  • 6.3.1. ENGINE STARTUP SAFETY
  • 6.3.2. MACHINE OPERATION SAFETY PRECAUTIONS
  • 6.3.3. SUDDEN LOSS OF ENGINE POWER OR LOSS OF DRIVE SYSTEM FUNCTION
  • 6.3.4. EMERGENCY STEERING SYSTEM
  • 6.3.5. FUEL DEPLETION
  • 6.3.6. SAFE PARKING PROCEDURES
  • 6.3.7. NORMAL ENGINE SHUTDOWN PROCEDURE
  • 6.4. DISABLED TRUCK CONNECTORS
  • 6.4.1. GENERAL INFORMATION
  • 6.4.2. STEERING AND BRAKE SYSTEM
  • 6.4.3. HOIST SYSTEM
  • 6.5. TOWING
  • 6.5.1. SPECIAL WIRING HARNESS
  • 6.5.2. TOWING PROCEDURE
  • 6.6. PAYLOAD METER IV SYSTEM
  • 6.6.1. GENERAL INFORMATION
  • 6.6.2. COMPONENT DESCRIPTION
  • 6.6.3. SCOREBOARD
  • 6.6.4. OPERATORS DISPLAY AND SWITCH
  • 6.6.5. PAYLOAD OPERATION CALCULATION
  • 6.6.6. SOURCES FOR PAYLOAD ERROR
  • 6.6.7. Clean Truck Tare
  • 6.6.8. DOWNLOADING HAUL CYCLE DATA
  • 6.6.9. VIEWING ALARM DATA
  • 6.6.10. DOWNLOADING ALARM DATA
  • 6.7. AUTOMATIC LUBRICATION SYSTEM
  • 6.7.1. GENERAL INFORMATION
  • 6.7.2. COMPONENT DESCRIPTION
  • 6.7.3. SYSTEM OPERATION
  • 6.7.4. PREVENTIVE MAINTENANCE PROCEDURES
  • 6.7.5. SYSTEM CHECKOUT
  • 6.8. RESERVE ENGINE OIL SYSTEM
  • 7. OPERATOR CAB AND CONTROLS
  • 7.1. CAB INTERIOR
  • 7.2. STEERING WHEEL AND CONTROLS
  • 7.3. PEDALS
  • 7.4. OVERHEAD PANEL AND DISPLAYS
  • 7.5. CENTER CONSOLE
  • 7.6. DIAGNOSTIC PORTS
  • 7.7. OPERATOR SEAT (Standard)
  • 7.8. OPERATOR SEAT (Optional)
  • 7.9. PASSENGER SEAT (Standard)
  • 7.10. PASSENGER SEAT (Optional)
  • 7.11. HEATER / AIR CONDITIONER CONTROLS
  • 7.12. INSTRUMENT PANEL
  • 7.13. STATUS INDICATOR PANEL
  • 7.13.1. STATUS INDICATORS
  • 7.13.1.1. Body Up
  • 7.13.1.2. Parking Brake
  • 7.13.1.3. Propel System Not Ready
  • 7.13.1.4. No Propel
  • 7.13.1.5. Engine Warm Up
  • 7.13.1.6. Engine Shutdown Delay
  • 7.13.1.7. Retarding Grid Dryer
  • 7.13.1.8. Wheel Brake Lock
  • 7.13.1.9. Traction Control OFF
  • 7.13.1.10. Repair Monitor
  • 7.13.1.11. Snapshot In Progress
  • 7.13.1.12. Pantograph Energized
  • 7.13.1.13. Pantograph Up
  • 7.13.1.14. Service Brake
  • 7.13.1.15. Dynamic Retarding
  • 7.13.1.16. No DC Link Voltage
  • 7.14. DIGITAL DISPLAY OPERATIONS
  • 7.14.1. DIGITAL DISPLAY MENUS
  • 7.14.2. ACTIVE WARNINGS MENU
  • 7.14.3. PAYLOAD DATA MENU
  • 7.14.4. REPAIR ITEMS MENU
  • 7.14.5. MAINTENANCE ITEMS MENU
  • 7.14.6. CLEARED ITEMS MENU
  • 7.14.7. SYSTEM CONTROLS MENU
  • 7.14.8. TIRE DATA MENU
  • 7.14.9. LANGUAGES MENU
  • 7.14.10. CONFIGURE SYSTEM MENU
  • 7.15. ORBCOMM
  • 7.16. KOMATSU WIRELESS BRIDGE (Optional)
  • 7.17. KOMTRAX Plus
  • 7.17.1. KOMTRAX Plus OPERATION
  • 7.17.2. DOWNLOADING KOMTRAX Plus DATA
  • 7.17.3. UPLOADING KOMTRAX Plus DATA
  • 7.18. FUSES AND CIRCUIT BREAKERS
  • 7.18.1. FUSE BLOCK 1
  • 7.18.2. FUSE BLOCK 2
  • 7.18.3. FUSE BLOCK 3
  • 7.18.4. FUSE HOLDERS
  • 7.18.5. CIRCUIT BREAKERS
  • 8. LUBRICATION AND SERVICE
  • 8.1. GENERAL INFORMATION
  • 8.1.1. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
  • 8.1.2. HYDRAULIC SYSTEM SERVICE
  • 8.1.3. WHEEL MOTOR SERVICE
  • 8.1.4. WHEEL MOUNTING
  • 8.1.5. COOLANT LEVEL SERVICE
  • 8.1.6. RESERVE ENGINE OIL SERVICE
  • 8.1.7. CAB AIR FILTER SERVICE
  • 8.1.8. FUEL SYSTEM SERVICE
  • 8.1.9. INTAKE AIR CLEANER SERVICE
  • 8.1.10. FRONT ENGINE MOUNT TRUNNION SERVICE
  • 8.1.11. QUICK FILL SERVICE CENTER
  • 8.1.12. TIE ROD INSPECTION AND TORQUE PROCEDURE
  • 8.1.13. CHECK AUTOMATIC LUBRICATION (AUTOLUBE) SYSTEM PUMP OIL LEVEL
  • 8.1.14. CHANGE AUTOMATIC LUBRICATION (AUTOLUBE) SYSTEM PUMP OIL
  • 8.2. PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
  • 8.3. INITIAL 50 HOUR LUBRICATION AND MAINTENANCE INSPECTION
  • 8.4. INITIAL 100 HOUR LUBRICATION AND MAINTENANCE INSPECTION
  • 8.5. EVERY 250 HOUR LUBRICATION AND MAINTENANCE
  • 8.6. EVERY 500 HOUR LUBRICATION AND MAINTENANCE
  • 8.7. EVERY 1000 HOURS LUBRICATION AND MAINTENANCE
  • 8.8. EVERY 2000 HOUR LUBRICATION AND MAINTENANCE INSPECTION
  • 8.9. EVERY 3000 HOUR LUBRICATION AND MAINTENANCE INSPECTION
  • 8.10. EVERY 5000 HOUR MAINTENANCE
  • 8.11. EVERY 6000 HOUR MAINTENANCE
  • 8.12. EVERY 18000 HOUR MAINTENANCE
  • 8.13. HOUR LUBRICATION AND MAINTENANCE CHECKS
  • 9. SPECIFICATIONS
  • 9.1. MAJOR COMPONENT DESCRIPTION
  • 9.1.1. Truck and Engine
  • 9.1.2. Traction Alternator
  • 9.1.3. Main Control Cabinet
  • 9.1.4. AC Induction Traction Motorized Wheels
  • 9.1.5. Suspension
  • 9.1.6. Operators Cab
  • 9.1.7. Power Steering
  • 9.1.8. Dynamic Retarding
  • 9.1.9. Brake System
  • 9.2. SPECIFICATIONS
  • 9.2.1. Engine
  • 9.2.2. AC Electric Drive System
  • 9.2.3. Dynamic Retarding
  • 9.2.4. Battery Electric System
  • 9.2.5. Service Capacities
  • 9.2.6. Hydraulic Systems
  • 9.2.7. Service Brakes
  • 9.2.8. Steering
  • 9.2.9. Standard Dump Body Capacities and Dimensions
  • 9.2.10. Tires
  • 9.2.11. Weight Distribution
  • 9.2.12. Overall Truck Dimensions
  • 10. RADIO
  • 10.1. AM/FM RADIO / MP3 / USB / iPOD / AUX PLAYER
  • 10.1.1. USB Connection Port
  • 10.1.2. Phone/Bluetooth Button
  • 10.1.3. Digital Display
  • 10.1.4. DISP (Display) Button
  • 10.1.5. SRC/PWR/ESC (Source/Power/Escape) Button
  • 10.1.6. Volume Knob/OK Button
  • 10.1.7. NEXT Button
  • 10.1.8. PREV (Previous) Button
  • 10.1.9. Preset Buttons
  • 10.1.10. RDM (Random) Button
  • 10.1.11. RPT (Repeat) Button
  • 10.1.12. Mute/Play/Pause Button
  • 10.1.13. Browse Button
  • 10.1.14. SCAN/ASCN (Scan/Autoscan) Button
  • 10.1.15. Auxiliary Jack Port
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu 960E-2K Dump Truck Operation and Maintenance Manual CEAM026404”

Your email address will not be published. Required fields are marked *

Related products