Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341

Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341 - Image 2

Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341 - Image 3

Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341 - Image 4

Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341 - Image 5

komatsu d155ax 8 bull dozer operation and maintenance manual eenam03341 2

komatsu d155ax 8 bull dozer operation and maintenance manual eenam03341 3

Komatsu D155AX-8 Bull Dozer Operation and Maintenance Manual EENAM03341

$30.00

Type Of Manual: Operation and Maintenance Manual
Manual ID: EENAM03341
Format: PDF
Size: 17.3MB
Number of Pages: 412

Category: Komatsu Operation and Maintenance Manual PDF

Model List:
- D155AX-8 Bull Dozer

1. FOREWORD
1.1. READ THIS MANUAL
1.2. SAFETY INFORMATION
1.3. SAFETY LABELS
1.4. NOISE
1.5. VIBRATION LEVELS
1.5.1. VIBRATION OPERATING CONDITION
1.5.2. GUIDE TO REDUCE VIBRATION LEVELS ON MACHINE
1.6. INTRODUCTION
1.6.1. MAIN USE OF MACHINE
1.6.2. DIRECTIONS OF MACHINE
1.6.3. VISIBILITY FROM OPERATORS SEAT
1.7. ENGINE TECHNOLOGY TO CONFORM EXHAUST GAS EMISSION
1.8. PRODUCT INFORMATION
1.8.1. LOCATION OF PRODUCT IDENTIFICATION NUMBER (PIN)/MACHINE SERIAL NO. PLATE
1.8.2. LOCATION OF ENGINE NUMBER PLATE
1.8.3. LOCATION OF BLADE SERIAL NO. PLATE
1.8.4. FLUORINATED GREENHOUSE GASES
1.8.5. LOCATION OF RIPPER SERIAL NO. PLATE
1.8.6. LOCATION FOR ROPS AND FOPS PLATE
1.8.7. SERVICE METER LOCATION
1.8.8. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
1.9. SERIAL PLATE
1.10. DECLARATION OF CONFORMITY
1.11. TABLE OF CONTENTS
2. SAFETY
2.1. SAFETY
2.2. SAFETY LABELS
2.2.1. LOCATION OF SAFETY LABELS
2.2.2. CONTENTS OF SAFETY LABELS
2.3. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
2.3.1. PRECAUTIONS BEFORE STARTING OPERATION
2.3.2. PREPARATIONS FOR SAFE OPERATION
2.3.3. PRECAUTIONS TO PREVENT FIRE
2.3.4. PRECAUTIONS WHEN GETTING ON OR OFF MACHINE
2.3.5. DO NOT GET CAUGHT IN WORK EQUIPMENT
2.3.6. PRECAUTIONS RELATED TO PROTECTIVE STRUCTURES
2.3.7. UNAUTHORIZED MODIFICATION
2.3.8. PRECAUTIONS RELATED TO ATTACHMENTS AND OPTIONS
2.3.9. PRECAUTIONS WHEN RUNNING ENGINE INSIDE BUILDING
2.4. PRECAUTIONS FOR OPERATION
2.4.1. PRECAUTIONS FOR JOBSITE
2.4.2. START ENGINE
2.4.3. PRECAUTIONS FOR OPERATION
2.4.4. PRECAUTIONS FOR TRANSPORTATION
2.4.5. TOWING AND BEING TOWED
2.5. PRECAUTIONS FOR MAINTENANCE
2.5.1. PRECAUTIONS BEFORE STARTING INSPECTION AND MAINTENANCE
2.5.2. PRECAUTIONS FOR CHECK AND MAINTENANCE
2.6. PRECAUTIONS FOR DEF
2.6.1. GENERAL CHARACTER AND PRECAUTIONS FOR HANDLING
2.6.2. PRECAUTIONS FOR ADDING
2.6.3. PRECAUTIONS FOR STORING
2.6.4. PRECAUTIONS FOR FIRE HAZARD AND LEAKAGE
2.6.5. OTHER PRECAUTIONS
3. OPERATION
3.1. GENERAL VIEW
3.1.1. MACHINE EQUIPMENT NAME
3.1.2. CONTROLS AND GAUGES NAMES
3.2. EXPLANATION OF COMPONENTS
3.2.1. EXPLANATION OF MACHINE MONITOR EQUIPMENT
3.2.2. SWITCHES
3.2.3. CONTROL LEVERS AND PEDALS
3.2.4. OTHER EQUIPMENT
3.3. MACHINE OPERATIONS AND CONTROLS
3.3.1. CHECKS AND ADJUSTMENT BEFORE STARTING ENGINE
3.3.2. METHOD FOR STARTING ENGINE
3.3.3. METHOD FOR OPERATIONS AND CHECKS AFTER STARTING ENGINE
3.3.4. METHOD FOR STOPPING ENGINE
3.3.5. METHOD FOR STARTING MACHINE (TRAVEL FORWARD AND REVERSE) AND STOPPING MACHINE
3.3.6. SHIFT GEARS
3.3.7. METHOD FOR SWITCHING BETWEEN FORWARD AND REVERSE
3.3.8. METHOD FOR STEERING MACHINE
3.3.9. PRECAUTIONS FOR OPERATION
3.3.10. PRECAUTIONS WHEN OPERATING ON SLOPE
3.3.11. PRECAUTIONS FOR USING BRAKE
3.3.12. DO NOT OPEN DOOR WHILE OPERATING MACHINE
3.3.13. DO NOT MODIFY CAB GLASS IN ANY WAY THAT WILL OBSTRUCT THE VIEW
3.3.14. PRECAUTIONS FOR FLOATING OPERATION
3.3.15. PRECAUTIONS FOR BLIND SPOTS CAUSED BY CAB AND ROPS STRUCTURES
3.3.16. RECOMMENDED APPLICATIONS
3.3.17. EFFECTIVE USE OF RIPPER
3.3.18. OPERATING METHOD FOR RIPPING WORK
3.3.19. METHOD FOR ADJUSTING WORK EQUIPMENT
3.3.20. TIPS FOR LONGER UNDERCARRIAGE LIFE
3.3.21. METHOD FOR PARKING MACHINE
3.3.22. METHOD FOR CHECKING AFTER FINISHING WORK
3.3.23. LOCK
3.4. HANDLE AIR CONDITIONER
3.4.1. EXPLANATION OF AIR CONDITIONER EQUIPMENT
3.4.2. METHOD FOR OPERATING AIR CONDITIONER
3.5. HANDLE RADIO
3.5.1. EXPLANATION OF RADIO EQUIPMENT
3.5.2. METHOD FOR CONTROLLING RADIO
3.5.3. ANTENNA
3.6. TRANSPORTATION
3.6.1. PRECAUTIONS FOR TRANSPORTATION
3.6.2. TRAVEL ON ROAD
3.6.3. PRECAUTIONS FOR TRANSPORTING MACHINE
3.6.4. TRANSPORTATION PROCEDURE
3.6.5. LOADING AND UNLOADING WITH TRAILER
3.6.6. METHOD FOR LIFTING MACHINE
3.7. COLD WEATHER OPERATION
3.7.1. COLD WEATHER OPERATION INFORMATION
3.7.2. PRECAUTIONS AFTER DAILY WORK COMPLETION
3.7.3. AFTER COLD WEATHER SEASON
3.8. PRECAUTIONS FOR LONGTERM STORAGE
3.8.1. PREPARATION FOR LONGTERM STORAGE
3.8.2. MAINTENANCE DURING LONGTERM STORAGE
3.8.3. STARTING MACHINE AFTER LONGTERM STORAGE
3.9. TROUBLES AND ACTIONS
3.9.1. ACTIONS WHEN RUNNING OUT OF FUEL
3.9.2. PRECAUTIONS FOR TOWING MACHINE
3.9.3. PRECAUTIONS FOR DISCHARGED BATTERY
3.9.4. OTHER TROUBLE
4. MAINTENANCE
4.1. PRECAUTIONS FOR MAINTENANCE
4.1.1. CHECK SERVICE METER READING
4.1.2. KOMATSU GENUINE REPLACEMENT PARTS
4.1.3. KOMATSU GENUINE LUBRICANTS
4.1.4. ALWAYS USE CLEAN WASHER FLUID
4.1.5. FRESH AND CLEAN LUBRICANTS
4.1.6. CHECK DRAINED OIL AND USED FILTER
4.1.7. PRECAUTIONS FOR REFILLING OIL OR FUEL
4.1.8. PRECAUTIONS FOR ADDING DEF
4.1.9. WELDING INSTRUCTIONS
4.1.10. DO NOT DROP THINGS INSIDE MACHINE
4.1.11. PRECAUTIONS FOR KDPF
4.1.12. PRECAUTIONS FOR SCR ASSEMBLY
4.1.13. DUSTY JOBSITES
4.1.14. AVOID MIXING OIL
4.1.15. LOCK INSPECTION COVERS
4.1.16. PRECAUTIONS FOR OPENING AND CLOSING ENGINE SIDE COVER
4.1.17. BLEED AIR FROM HYDRAULIC CIRCUIT
4.1.18. PRECAUTIONS WHEN INSTALLING HYDRAULIC HOSES
4.1.19. CHECKS AFTER INSPECTION AND MAINTENANCE
4.1.20. FUEL AND LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE
4.2. OUTLINE OF MAINTENANCE
4.2.1. HANDLE OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC
4.2.2. HANDLE ELECTRICAL COMPONENTS
4.2.3. HANDLE HYDRAULIC COMPONENTS
4.3. STANDARD TIGHTENING TORQUE FOR BOLTS AND NUTS
4.4. MAINTENANCE SCHEDULE
4.4.1. MAINTENANCE SCHEDULE TABLE
4.5. MAINTENANCE PROCEDURE
4.5.1. INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
4.5.2. WHEN REQUIRED
4.5.3. CHECKS BEFORE STARTING
4.5.4. EVERY 250 HOURS MAINTENANCE
4.5.5. EVERY 500 HOURS MAINTENANCE
4.5.6. EVERY 1000 HOURS MAINTENANCE
4.5.7. EVERY 2000 HOURS MAINTENANCE
4.5.8. EVERY 4000 HOURS MAINTENANCE
4.5.9. EVERY 4500 HOURS MAINTENANCE
4.5.10. EVERY 8000 HOURS MAINTENANCE
4.5.11. EVERY 9000 HOURS MAINTENANCE
5. SPECIFICATIONS
5.1. SPECIFICATIONS
5.1.1. SPECIFICATIONS D155AX8
6. ATTACHMENTS AND OPTIONS
6.1. GENERAL PRECAUTIONS
6.1.1. PRECAUTIONS FOR SAFETY
6.2. ATTACHMENTS AND OPTIONS
6.3. SELECTION PROCEDURE OF RIPPER POINT
6.4. HANDLE HEADREST
7. REPLACEMENT PARTS
7.1. PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
7.1.1. DEFINED LIFE PARTS LIST
7.2. CONSUMABLE PARTS
7.2.1. CONSUMABLE PARTS
7.3. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
7.3.1. LUBRICATION CHART
7.3.2. METHOD FOR USING FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
7.3.3. RECOMMENDED BRANDS AND QUALITIES OTHER THAN KOMATSU GENUINE OILS
8. INDEX

Rate this product