Komatsu D39EX-12, D39PX-12 Bull Dozer Operation and Maintenance Manual SEAM040200

Description

• Model List:
  • D39EX-12 Bull Dozer
  • D39PX-12 Bull Dozer

• 1. MAIN MENU
• 2. COVER
• 3. FOREWORD
• 3.1. FOREWORD
• 3.2. SAFETY INFORMATION
• 3.3. INTRODUCTION
• 3.3.1. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
• 3.4. NECESSARY INFORMATION
• 3.4.1. MACHINE SERIAL NO. PLATE AND POSITION
• 3.4.2. ENGINE SERIAL NO. PLATE AND POSITION
• 3.4.3. EMISSION CONTROL INFORMAITON LABEL AND POSITION
• 3.4.4. POSITION OF SERVICE METER
• 3.4.5. TABLE TO ENTER SERIAL NO. AND DISTRIBUTION
• 3.5. CONTENTS
• 4. SAFETY
• 4.1. SAFETY
• 4.2. SAFETY LABELS
• 4.2.1. POSITIONS OF SAFETY PICTOGRAMS
• 4.2.2. SAFETY LABELS
• 4.3. GENERAL PRECAUTIONS
• 4.3.1. SAFETY RULES
• 4.3.2. IF ABNORMALITY ARE FOUND
• 4.3.3. CLOTHING AND PERSONAL PROTECTIVE ITEMS
• 4.3.4. FIRE EXTINGUISHER AND FIRST AID KIT
• 4.3.5. SAFETY FEATURES
• 4.3.6. KEEP MACHINE CLEAN
• 4.3.7. INSIDE OPERATORS COMPARTMENT
• 4.3.8. ALWAYS APPLY LOCK WHEN LEAVING OPERATORS SEAT
• 4.3.9. HANDRAILS AND STEPS
• 4.3.10. MOUNTING AND DISMOUNTING
• 4.3.11. NO PEOPLE ON ATTACHMENTS
• 4.3.12. CRUSHING OR CUTTING PREVENTION
• 4.3.13. PREVENTION OF BURNS
• 4.3.14. FIRE PREVENTION
• 4.3.15. ACTION IF FIRE OCCURS
• 4.3.16. WINDOW WASHER LIQUID
• 4.3.17. PRECAUTIONS WHEN USING ROPS
• 4.3.18. PRECAUTIONS FOR ATTACHMENTS
• 4.3.19. UNAUTHORIZED MODIFICATION
• 4.3.20. SAFETY AT WORKSITE
• 4.3.21. WORKING ON LOOSE GROUND
• 4.3.22. DO NOT GO CLOSE TO HIGHVOLTAGE CABLES
• 4.3.23. ENSURE GOOD VISIBILITY
• 4.3.24. VENTILATION FOR ENCLOSED AREA
• 4.3.25. CHECKING SIGNALMANS SIGNALS AND SIGNS
• 4.3.26. EMERGENCY EXIT FROM OPERATORS CAB
• 4.3.27. BE CAREFUL ABOUT ASBESTOS DUST
• 4.4. PRECAUTIONS FOR OPERATIONS
• 4.4.1. STARTING ENGINE
• 4.4.1.1. CHECKS BEFORE STARTING ENGINE
• 4.4.1.2. PRECAUTIONS WHEN STARTING
• 4.4.1.3. PRECAUTIONS IN COLD AREAS
• 4.4.2. OPERATION
• 4.4.2.1. CHECKS BEFORE OPERATION
• 4.4.2.2. PRECAUTIONS FOR MOVING MACHINE FORWARD OR IN REVERSE
• 4.4.2.3. PRECAUTIONS WHEN TRAVELING
• 4.4.2.4. TRAVELING ON SLOPES
• 4.4.2.5. OPERATE CAREFULLY ON SNOW
• 4.4.2.6. PARKING MACHINE
• 4.4.3. TRANSPORTATION
• 4.4.3.1. LOADING AND UNLOADING
• 4.4.3.2. SHIPPING
• 4.4.4. BATTERY
• 4.4.4.1. BATTERY HAZARD PREVENTION
• 4.4.4.2. STARTING WITH BOOSTER CABLE
• 4.4.5. TOWING
• 4.4.5.1. WHEN TOWING
• 4.5. PRECAUTIONS FOR MAINTENANCE
• 4.5.1. WARNING TAG
• 4.5.2. KEEP WORK PLACE CLEAN AND TIDY
• 4.5.3. APPOINT LEADER WHN WORKING WITH OTHERS
• 4.5.4. STOP ENGINE BEFORE CARRYING OUT INSPECTION AND MAINTENANCE
• 4.5.5. TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING
• 4.5.6. PROPER TOOLS
• 4.5.7. NO UNAUTHORIZED PERSONNEDL INTO AREA
• 4.5.8. ATTACHMENTS
• 4.5.9. WORK UNDER THE MACINE
• 4.5.10. NOISE
• 4.5.11. PRECAUTIONS WHEN USING HAMMER
• 4.5.12. REPAIR WELDING
• 4.5.13. REMOVING BATTERY TERMINAL
• 4.5.14. PRECAUTIONS WHEN USING HIGHPRESSURE GREASE TO ADJUST TRACK TENSION
• 4.5.15. DO NOT DISASSEMBLE RECOIL SPRING
• 4.5.16. PRECAUTION WITH HIGHPRESSURE OIL
• 4.5.17. HANDLING HIGHPRESSURE HOSES
• 4.5.18. WASTE MATERIAL
• 4.5.19. MAINTENANCE FOR AIR CONDITIONER
• 4.5.20. COMPRESSED AIR
• 4.5.21. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 5. OPERATION
• 5.1. GENERAL VIEW
• 5.1.1. GENERAL VIEW OF MACHINE
• 5.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
• 5.2. EXPLANATION OF COMPONENTS
• 5.2.1. MONITOR PANEL
• 5.2.2. SWITCHES
• 5.2.3. CONTROL LEVERS AND PEDALS
• 5.2.4. FUSE
• 5.2.5. ELECTRIC POWER TAKEOUT ADAPTER
• 5.2.6. DOOROPEN LOCK
• 5.2.7. SASH GLASS INTERMEDIATE LOCK
• 5.2.8. CAP, COVER WITH LOCK
• 5.2.9. DOOR POCKET
• 5.2.10. ASHTRAY
• 5.2.11. LUNCHBOX HOLDER BELT
• 5.2.12. CUP HOLDER
• 5.2.13. TOOL BOX
• 5.2.14. GREASE PUMP HOLDER
• 5.2.15. CAR STEREO, HANDLING
• 5.2.16. AIR CONDITIONER, HANDLING
• 5.3. OPERATION
• 5.3.1. CHECK BEFORE STARTING ENGINE, ADJUST
• 5.3.2. STARTING ENGINE
• 5.3.3. OPERATIONS AND CHECKS AFTER STARTING ENGINE
• 5.3.4. STOPPING ENGINE
• 5.3.5. CHECK AFTER STOPPING ENGINE
• 5.3.6. MACHINE OPERATION
• 5.3.7. STOPPING MACHINE
• 5.3.8. SHIFTING GEAR
• 5.3.9. SHIFTING BETWEEN FORWARD AND REVERSE
• 5.3.10. STEERING MACHINE
• 5.3.11. PRECAUTIONS FOR OPERATION
• 5.3.12. WORK POSSIBLE USING BULLDOZER
• 5.3.13. PARKING MACHINE
• 5.3.14. CHECK AFTER FINISHING WORK
• 5.3.15. LOCKING
• 5.3.16. TIPS FOR LONGER UNDERCARRIAGE LIFE
• 5.4. TRANSPORATION
• 5.4.1. TRANSPORATION MEANS
• 5.4.2. REMOVING CAB
• 5.4.3. PRECAUTIONS WHEN REMOVING WORK EQUIPMENT
• 5.4.4. LOADING, UNLOADING WORK
• 5.4.5. LIFTING MACHINE
• 5.5. COLD WEATHER OPERATION
• 5.5.1. PRECAUTIONS FOR LOW TEMPERATURE
• 5.5.2. AFTER COMPLETION OF WORK
• 5.5.3. AFTER COLD WEATHER
• 5.6. LONGTERM STORAGE
• 5.6.1. BEFORE STORAGE
• 5.6.2. DURING STORAGE
• 5.6.3. AFTER STORAGE
• 5.7. TROUBLESHOOTING
• 5.7.1. AFTER RUNNING OUT OF FUEL
• 5.7.2. MACHINE TOWING METHOD
• 5.7.3. IF BATTERY IS DISCHARGED
• 5.7.4. WHEN ENGINE DOES NOT STOP
• 5.7.5. OTHER TROUBLE
• 6. MAINTENANCE
• 6.1. GUIDE TO MAINTENANCE
• 6.2. OUTLINE OF SERVICE
• 6.2.1. OUTLINE OF OIL, FUEL, COOLANT
• 6.2.2. RELATING TO ELECTRIC SYSTEM
• 6.3. WEAR PARTS LIST
• 6.3.1. WEAR PARTS LIST
• 6.4. USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
• 6.4.1. PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
• 6.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 6.5.1. TROQUE LIST
• 6.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 6.6.1. SAFETY CRITICAL PARTS
• 6.7. MAINTENANCE SCHEDULE CHART
• 6.7.1. MAINTENANCE SCHEDULE CHART
• 6.7.2. SERVICE PROCEDURE
• 6.7.2.1. WHEN REQUIRED
• 6.7.2.1.1. CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT
• 6.7.2.1.2. CLEAN INSIDE OF COOLING SYSTEM
• 6.7.2.1.3. CHECK TRACK TENSION
• 6.7.2.1.4. CHECK AND TIGHTEN TRACK SHOE BOLTS
• 6.7.2.1.5. CHECK ELECTRICAL INTAKE AIR HEATER
• 6.7.2.1.6. REVERSE AND REPLACE END BITS AND CUTTING EDGES
• 6.7.2.1.7. ADJUST IDLER CLEARANCE
• 6.7.2.1.8. CHECK, ADJUST AIR CONDITIONER
• 6.7.2.1.9. GREASE DOOR HINGE
• 6.7.2.1.10. CHECK DOOR LOCK STRIKER
• 6.7.2.1.11. CHECK WINDOW WASHER FLUID LEVEL, ADD FLUID
• 6.7.2.1.12. REPLACE WIPER BLADE
• 6.7.2.1.13. CHECK IDLER OIL LEVEL, ADD OIL
• 6.7.2.1.14. ADJUST PLAY IN CENTER BALL
• 6.7.2.1.15. PROCEDURE FOR BLEEDING AIR IN HYDRAULIC SYSTEM
• 6.7.2.1.16. PROCEDURE FOR RELEASING INTERNAL PRESSURE OF HYDRAULIC SYSTEM
• 6.7.2.2. CHECK BEFORE STARTING
• 6.7.2.3. EVERY 50 HOURS SERVICE
• 6.7.2.3.1. DRAIN WATER, SEDIMENT FROM FUEL TANK
• 6.7.2.4. EVERY 250 HOURS SERVICE
• 6.7.2.4.1. LUBRICATING
• 6.7.2.4.2. CHECK OIL LEVEL IN FINAL DRIVE CASE , ADD OIL
• 6.7.2.4.3. CHECK LEVEL OF BATTERY ELECTROLYTE
• 6.7.2.4.4. CHECK BRAKE PERFORMANCE
• 6.7.2.4.5. CLEAN AIR CONDITIONER AIR FILTER (FRESH/RECIRC FILTER)
• 6.7.2.5. EVERY 500 HOURS SERVICE
• 6.7.2.5.1. REPLACE FUEL FILTER CARTRIDGE
• 6.7.2.5.2. CHANGE OIL IN ENGINE OIL PAN, RPLACE ENGINE OIL FILTER CARTRIDGE
• 6.7.2.5.3. REPLACE CORROSION RESISTOR CARTRIDGE
• 6.7.2.5.4. CHECK, CLEAN RADIATOR FINS
• 6.7.2.6. EVERY 1000 HOURS SERVICE
• 6.7.2.6.1. CHANGE OIL IN FINAL DRIVE CASE
• 6.7.2.6.2. CHECK FAN BELT TENSION, ADJUST
• 6.7.2.6.3. CHECK ALL TIGHTENING PARTS OF TURBOCHARGER
• 6.7.2.6.4. CHECK PLAY OF TURBOCHARGER ROTOR
• 6.7.2.6.5. CHECK FOR LOOSE ROPS MOUNT BOLTS
• 6.7.2.7. EVERY 2000 HOURS SERVICE
• 6.7.2.7.1. CHANGE OIL IN HYDRAULIC TANK, REPLACE OIL FILTER CARTRIDGE AND CLEAN SUCTION STRAINER
• 6.7.2.7.2. CLEAN, CHECK TURBOCHARGER
• 6.7.2.7.3. CHECK VIBRATION DAMPER
• 6.7.2.7.4. CHECK ALTERNATOR, STARTING MOTOR
• 6.7.2.7.5. CHECK ENGINE VALVE CLEARANCE, ADJUST
• 6.7.2.8. EVERY 4000 HOURS SERVICE
• 6.7.2.8.1. CHECK WATER PUMP
• 7. SPECIFICATIONS
• 7.1. SPECIFICATIONS
• 8. ATTACHMENTS, OPTIONS
• 8.1. GENERAL PRECAUTIONS
• 8.1.1. PRECAUTIONS RELATED TO SAFETY
• 8.2. SUSPENSION SEAT
• 8.3. HEADREST
• 8.4. EQUIPPING FIRE EXTINGUISHER AND FIRST AID KIT
• 9. INDEX