Description
-
Model List:
- GD655-7 Motor Grader
- 1. COVER
- 2. FOREWORD
- 2.1. CONTENTS
- 2.2. FOREWORD
- 2.3. SAFETY INFORMATION
- 2.4. INTRODUCTION
- 2.5. ENGINE TECHNOLOGY TO CONFORM EXHAUST GAS EMISSION
- 2.6. MACHINE INFORMATION
- 2.6.1. LOCATION OF PRODUCT IDENTIFICATION NUMBER (PIN) AND MACHINE SERIAL NO. PLATE
- 2.6.2. LOCATION OF ENGINE NUMBER PLATE
- 2.6.3. SERVICE METER LOCATION
- 2.6.4. YOUR MACHINE SERIAL NUMBERS AND DISTRIBUTOR
- 2.7. ABBREVIATION LIST
- 3. SAFETY
- 3.1. SAFETY LABELS
- 3.2. GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
- 3.2.1. PRECAUTIONS BEFORE STARTING OPERATION
- 3.2.2. PREPARATIONS FOR SAFE OPERATION
- 3.2.3. ACTIONS IF FIRE OCCURS
- 3.2.4. PRECAUTIONS TO PREVENT FIRE
- 3.2.5. PRECAUTIONS WHEN YOU GET ON OR OFF MACHINE
- 3.2.6. PRECAUTIONS FOR MACHINE AND JOBSITE
- 3.3. PRECAUTIONS FOR OPERATION
- 3.3.1. PRECAUTIONS FOR JOBSITE
- 3.3.2. START ENGINE
- 3.3.3. PRECAUTIONS FOR OPERATION
- 3.3.4. PRECAUTIONS FOR TRANSPORTATION
- 3.3.5. TOWING AND BEING TOWED
- 3.4. PRECAUTIONS FOR MAINTENANCE
- 3.4.1. PRECAUTIONS BEFORE YOU START INSPECTION AND MAINTENANCE
- 3.4.2. PRECAUTIONS FOR CHECK AND MAINTENANCE
- 3.5. PRECAUTIONS FOR TIRE
- 3.6. PRECAUTIONS FOR DEF
- 4. OPERATION
- 4.1. GENERAL VIEW
- 4.1.1. MACHINE EQUIPMENT NAME
- 4.1.2. CONTROLS AND GAUGES NAMES
- 4.1.3. NAMES OF OTHER EQUIPMENT
- 4.2. EXPLANATION OF COMPONENTS
- 4.2.1. MACHINE MONITOR EQUIPMENT
- 4.2.2. NAMES OF SWITCH PANEL EQUIPMENT
- 4.2.3. CONTROL LEVERS AND PEDALS
- 4.2.4. OTHER EQUIPMENT
- 4.3. MACHINE OPERATIONS AND CONTROLS
- 4.3.1. CHECKS AND ADJUSTMENT BEFORE YOU START ENGINE
- 4.3.2. START ENGINE
- 4.3.3. OPERATIONS AND CHECKS AFTER YOU START ENGINE
- 4.3.4. STOP ENGINE
- 4.3.5. CHECK AFTER YOU STOP ENGINE
- 4.3.6. START MACHINE (TRAVEL FORWARD AND REVERSE, GEAR SHIFT) AND STOP MACHINE
- 4.3.7. STEER MACHINE
- 4.3.8. OPERATE WORK EQUIPMENT
- 4.3.9. WORK PRECAUTIONS
- 4.3.10. ADJUST WORK EQUIPMENT POSTURE
- 4.3.11. BLADE ACCUMULATOR
- 4.3.12. RECOMMENDED APPLICATIONS
- 4.3.13. PARK MACHINE
- 4.3.14. CHECK AFTER YOU FINISH WORK
- 4.3.15. LOCK
- 4.3.16. TIRES
- 4.4. AIR CONDITIONER
- 4.4.1. AIR CONDITIONER EQUIPMENT
- 4.4.2. OPERATE AIR CONDITIONER
- 4.5. RADIO
- 4.5.1. RADIO EQUIPMENT
- 4.5.2. OPERATE RADIO
- 4.5.3. RADIO SETTING
- 4.6. TRANSPORTATION
- 4.6.1. SELECT TRANSPORTATION METHOD
- 4.6.2. PRECAUTIONS WHEN YOU TRANSPORT MACHINE
- 4.6.3. LOAD AND UNLOAD A TRAILER
- 4.6.4. SECURE MACHINE
- 4.6.5. LIFT MACHINE
- 4.7. COLD WEATHER OPERATION
- 4.7.1. COLD WEATHER OPERATION INFORMATION
- 4.7.2. PRECAUTIONS AFTER DAILY WORK COMPLETION IN COLD WEATHER
- 4.7.3. IN COLD WEATHER
- 4.7.4. AFTER COLD WEATHER SEASON
- 4.8. LONGTERM STORAGE PRECAUTIONS
- 4.8.1. PREPARATION FOR LONGTERM STORAGE
- 4.8.2. MAINTENANCE DURING LONGTERM STORAGE
- 4.8.3. START MACHINE AFTER LONGTERM STORAGE
- 4.9. TROUBLES AND ACTIONS
- 4.9.1. ACTIONS WHEN YOU RUN OUT OF FUEL
- 4.9.2. IF LEANING PIPING IS BROKEN
- 4.9.3. USE LEANING STOPPER
- 4.9.4. PRECAUTIONS FOR TOWING MACHINE
- 4.9.5. PRECAUTIONS FOR DISCHARGED BATTERY
- 4.9.6. LOWER WORK EQUIPMENT (RELEASING WORK EQUIPMENT HYDRAULIC PRESSURE) WHILE ENGINE IS OFF
- 4.9.7. OTHER TROUBLE
- 5. MAINTENANCE
- 5.1. PRECAUTIONS FOR MAINTENANCE
- 5.2. MAINTENANCE INFORMATION
- 5.2.1. OIL, FUEL, AND COOLANT
- 5.2.2. BATTERY TERMINAL
- 5.2.3. ELECTRICAL COMPONENTS
- 5.3. STANDARD TIGHTENING TORQUE FOR BOLTS AND NUTS
- 5.4. MAINTENANCE SCHEDULE
- 5.4.1. MAINTENANCE INTERVAL TABLE
- 5.5. MAINTENANCE PROCEDURE
- 5.5.1. INITIAL 250 HOURS MAINTENANCE (ONLY AFTER THE FIRST 250 HOURS)
- 5.5.2. INITIAL 1000 HOURS MAINTENANCE (ONLY AFTER THE FIRST 1000 HOURS)
- 5.5.3. WHEN REQUIRED
- 5.5.4. CHECK BEFORE YOU START OPERATION
- 5.5.5. EVERY 50 HOURS MAINTENANCE
- 5.5.6. EVERY 250 HOURS MAINTENANCE
- 5.5.7. EVERY 500 HOURS MAINTENANCE
- 5.5.8. EVERY 1000 HOURS MAINTENANCE
- 5.5.9. EVERY 2000 HOURS MAINTENANCE
- 5.5.10. EVERY 4000 HOURS MAINTENANCE
- 5.5.11. EVERY 4500 HOURS MAINTENANCE
- 5.5.12. EVERY 8000 HOURS MAINTENANCE
- 5.5.13. EVERY 9000 HOURS MAINTENANCE
- 6. SPECIFICATIONS
- 6.1. SPECIFICATIONS
- 7. ATTACHMENTS AND OPTIONS
- 7.1. MACHINES WITH ICT DEVICES
- 7.1.1. PRECAUTIONS FOR MACHINES WITH ICT DEVICES
- 7.2. MACHINE WITH CROSS SLOPE SYSTEM
- 7.2.1. OVERVIEW OF MACHINE WITH CROSS SLOPE SYSTEM
- 7.2.2. PRECAUTIONS FOR MACHINE WITH CROSS SLOPE SYSTEM
- 7.2.3. COMPONENTS ON MACHINES WITH CROSS SLOPE SYSTEM
- 7.2.4. USE CROSS SLOPE SYSTEM
- 8. REPLACEMENT PARTS
- 8.1. DEFINED LIFE PARTS
- 8.1.1. DEFINED LIFE PARTS LIST
- 8.2. CONSUMABLE PARTS
- 8.2.1. CONSUMABLE PARTS LIST
- 8.3. RECOMMENDED FUEL, COOLANT, AND LUBRICANT
- 8.3.1. LUBRICATION CHART
- 8.3.2. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 8.3.3. RECOMMENDED BRANDS AND QUALITIES OTHER THAN KOMATSU GENUINE OILS
- 9. INDEX
Reviews
There are no reviews yet.