Description
-
Model List:
- HD465-7 Dump Truck
- HD605-7 Dump Truck
- 1. COVER
- 2. CONTENTS
- 3. POINTS CHANGED FROM MODEL 5
- 4. OUTINE OF DIVISION
- 5. DIMENSIONS OF MAIN COMPONENTS
- 6. ROUGH SCHEDULE OF ASSEMBLY AND WELDING
- 7. LIST OF EQUIPMENTS, TOOLS, AND CONSUMABLES
- 8. ASSEMBLY PROCESS NO.
- 8.1. OIL, GREASE, AND COOLANT
- 8.2. LEVLELS OF OIL, GREASE, AND COOLANT
- 8.3. POSITIONING REAR AXLE ASSEMBLY
- 8.4. INSTALLING REAR SUSPENSION
- 8.5. SLINGING BARE MACHINE
- 8.6. INSTALLING REAR AXLE ASSEMBLY (CONNECTING SUSPENSION)
- 8.7. INSTALLING REAR AXLE ASSEMBLY (CONNECTING AXLE RODS)
- 8.8. POSITIONING BARE MACHINE
- 8.9. INSTALLING RIGHT FRONT AXLE (CONNECTING AARM)
- 8.10. INSTALLING RIGHT FRONT AXLE (CONNECTING STEERING CYLINDER AND TIE ROD)
- 8.11. INSTALLING RIGHT FRONT AXLE (CONNECTING SUSPENSION)
- 8.12. INSTALLING RIGHT FRONT AXLE (CONNECTING BRAKE HOSE)
- 8.13. INSTALLING RIGHT FRONT AXLE (CONNECTING PIPING FOR AUTOMATIC SUSPENSION)
- 8.14. INSTALLING TIRE AND WHEEL ASSEMBLY
- 8.15. INSTALLING BODY HINGE GREASE TUBE
- 8.16. INSTALLING DRIVE SHAFT
- 8.17. CONNECTING COOLING HOSE
- 8.18. CONNECTING BRAKE ACTUATING HOSE
- 8.19. INSTALLING RIGHT FRONT SUPPORT
- 8.20. INSTALLING RIGHT FENDER
- 8.21. INSTALLING RIGHT FENDER MUFFLER SPECIFICATION
- 8.22. INSTALLING R.H PLATFORM ASSEMBLY
- 8.23. INSTALLING L.H CATWALK ASSEMBLY
- 8.24. INSTALLING L.H HANDRAIL
- 8.25. INSTALLING RADIO ANTENNA AND FIXING ITS CABLE
- 8.26. INSTALLING L.H FENDER
- 8.27. INSTALLING LEFT SIDE MUDGUARD
- 8.28. INSTALLING RIGHT SIDE MUDGUARD
- 8.29. INSTALLING TRANSMISSION UNDERGUARD
- 8.30. REMOVING HOIST CYLINDER BRACKET
- 8.31. REMOVING HOIST PIPING BLIND PLATE
- 8.32. WELDING BODY
- 8.33. SLINGING BODY
- 8.34. INSTALLING HINGE PIN
- 8.35. CONNECTING HOIST CYLINDER
- 8.36. WELDING PROTECTIVE COVER BY ACTUALLY POSITIONING IT ON MACHINE
- 8.37. INSTALLING BODY MOUNT
- 8.38. PROCEDURE FOR ADJUSTING BODY MOUNT SHIM
- 8.39. WELDING EXHAUST TUBE BY ACTUALLY POSITIONING IT ON MACHINE
- 8.40. INSTALLING POKE EJECTOR
- 8.41. INSTALLING BODY LOCK PIN
- 8.42. INSTALLING BODY MUDGUARD
- 8.43. CONNECTING DUMP SENSOR
- 8.44. PROCEDURE FOR ADJUSTING DUMP SENSOR
- 8.45. CALIBRATING DUMP CONTROL
- 8.46. BLEEDING AIR FROM BRAKE SYSTEM
- 8.47. ADJUSTING SUSPENSION
- 8.48. FITTING FLOATING SEAL
- 8.49. PAINTING
- 8.50. STICKING BODY DECAL
- 9. ASR (ANTI SLIPED REGULATION)(IF EQUIPPED)
- 9.1. CONNECTION OF BRAKE HOSES
- 9.2. CONNECTION OF SPEED SENSOR CONNECTOR
- 9.3. BLEEDING AIR FROM ASR CIRCUIT
- 10. PROCEDURE FOR WELDING AND ASSEMBLING THREE SEPARATED BODY PARTS
- 10.1. PREPARATION WORK FOR LOCAL ASSEMBLY OF BODY DIVIDED INTO THREE PARTS (WELDING)
- 10.2. ASSEMBLY OF DIVIDED BODY PARTS
- 10.3. WELDING PROCEDURE FOR DIVIDED BODY PARTS
- 10.4. OPERATION FOR ASSEMBLY AND WELDING OF DIVIDED BODY PROTECTOR
- 10.5. WELDING OF THE BODY ASSEMBLY
- 11. ADDITIONAL MANUAL FOR KOTREA(IF EQUIPPED)
- 11.1. CONNECTION OF R.H. PLATFORM MIRROR HEATER WIRING HARNESS
- 11.2. FIXING AND CONNECTION OF L.H. CATWALK MIRROR HEATER WIRING HARNESS
- 11.3. INSTALLING TRANSMISSION UNDERGUARD 1 (FOR LHC)
- 11.4. INSTALLING TRANSMISSION UNDERGUARD 2 (FOR LHC)
- 12. FIELD ASSEMBLY INSPECTION REPORT
Reviews
There are no reviews yet.