Description
-
Model List:
- HM300-5E0 Articulated Dump Truck
- 1. COVER
- 2. Contents
- 3. Drawings of removed units
- 4. Dimensions of removed units
- 5. Assembly procedure, necessary equipments, and schedule
- 6. Necessary tools and equipments
- 7. Assembly procedure
- 7.1. Installation of the sling
- 7.2. Stationary bare machine (travel)
- 7.3. Stationary bare machine (nontravel)
- 7.4. Installation of tire and wheel assembly
- 7.5. Installation of front under mirror
- 7.6. Installation of L.H. fender step
- 7.7. Installation of L.H. fender mirror
- 7.8. Installation of L.H. fender mudguard
- 7.9. Installation of R.H. fender handrail
- 7.10. Installation of R.H. fender mirror
- 7.11. Installation of R.H. fender mudguard
- 7.12. Installation of antenna
- 7.13. Installation of payload and revolving lamp
- 7.14. Installation of payload
- 7.15. Sling and put stationary dump body
- 7.16. Subassembly of dump body without dump body heating (optional)
- 7.17. Subassembly of dump body with dump body heating
- 7.18. ADT assembly Bushing installation (optional)
- 7.19. ADT assembly side arm installation (optional)
- 7.20. ADT assembly procedure for assembling side arm mounting bolts (optional)
- 7.21. ADT assembly tailgate installation (optional)
- 7.22. ADT assembly with tailgate (optional)
- 7.23. ADT assembly with tailgate (optional)
- 7.24. ADT assembly greasing pipe installation (optional)
- 7.25. Installation of dump body
- 7.26. Connection of hoist cylinder
- 7.27. Installation of fire prevention cover for hoist piping
- 7.28. Connection and adjustment of dump angle sensor
- 7.29. Installation and adjustment of dump body bottom mount
- 7.30. Installation of dump body stopper
- 7.31. Installation of end bolt after installing dump body
- 7.32. Touch up painting of dump body
- 7.33. Sticking of decal on dump body
- 7.34. Sticking of decal on dump body (optional tailgate specification)
- 7.35. Sticking of dump body decals (optional when installing additional tailgate)
- 7.36. Installation of tieoff bracket
- 7.37. Sticking of certifi cate decals (dump body) for KAL
- 7.38. Dump body control calibration
- 7.39. Adjustment1 of rearview monitor
- 7.40. Adjustment2 of rearview monitor
- 7.41. Adjustment3 of rearview monitor
- 7.42. Adjustment4 of rearview monitor
- 7.43. N2 gas adjustment of front and rear suspension
- 7.44. No. Attachment 1 Mirror adjustment procedure
- 7.45. No. Attachment 2 Mirror adjustment procedure
- 8. Machine check sheet for field assembly
Reviews
There are no reviews yet.