Komatsu PC3000-1 Hydraulic Mining Shovel Operation and Maintenance Manual OMPC30006225

Description

• Model List:
  • PC3000-1 Hydraulic Mining Shovel

• 1. MAIN MENU
• 2. COVER
• 3. INTRODUCTION
• 3.1. CONTENTS OF THE BINDER
• 3.2. DIVISION OF THE BINDER
• 3.3. DESIGNATED USE OF THE HYDRAULIC EXCAVATOR
• 3.4. GENERAL CONTENT
• 3.4.1. PART 1 OPERATION MANUAL
• 3.4.2. PART 2 LUBRICATION AND MAINTENANCE MANUAL
• 3.4.3. PART 3 DIVERSE LITERATURE
• 4. PART 1 OPERATION MANUAL
• 4.1. TABLE OF CONTENTS
• 4.2. A EXPLANATION OF ABBREVIATIONS USED IN THIS MANUAL
• 4.3. FOREWORD
• 4.4. CONSTRUCTION OF THE EXCAVATOR
• 4.5. CATWALK IN FRONT OF THE OPERATORS CAB
• 4.6. SAFETY INSTRUCTIONS
• 4.7. LADDER, WALKWAYS AND ACCESS DOORS
• 4.8. EMERGENCY ENGINE SHUT DOWN FROM GROUND MAN AND OPERATOR WARNING SYSTEM
• 4.9. OPERATORS CAB
• 4.10. OPEARTORS SEAT
• 4.11. OPERATORS CAB CONTROLS
• 4.12. ELECTRONIC TEXT MONITORING SYSTEM DEMAG ETM
• 4.13. POWER HOUSE CONTROLS
• 4.14. MAIN SWITCH BOARD IN CAB BASE
• 4.15. HEATING SYSTEMS (SPECIAL EQUIPMENT)
• 4.16. GENERATOR SET
• 4.17. CHECKS BEFORE STARTING THE ENGINE
• 4.18. STARTING THE ENGINE
• 4.19. STOPPING THE ENGINE
• 4.20. MOVING THE EXCAVATOR
• 4.21. SLEWING AND BRAKING THE SUPERSTRUCTURE
• 4.22. WORKING WITH THE ATTACHMENT
• 4.23. COMBINED OPERATION CYCLES
• 4.24. OPERATING THE HEATER VENTILATION AND AIR CONDITIONING
• 4.25. OPERATION OF THE LUBRICATION SYSTEM
• 4.26. FIRE DETECTION AND SUPPRESSION SYSTEM (SPECIAL EQUIPMENT)
• 4.27. WORKING INSTRUCTIONS
• 4.28. PARKING THE EXCAVATOR
• 4.29. CENTRAL REFILLING SYSTEM
• 4.30. SERVICE CRANE (SPECIAL EQUIPMENT)
• 4.31. EXCHANGE OF ATTACHMENT AND/OR COMPONENTS
• 4.32. TRANSPORTATION AND LIFTING OF THE EXCAVATOR
• 4.33. RETRIEVAL PROCEDURE
• 5. PART 2 LUBRICATION AND MAINTENANCE MANUAL
• 5.1. FOREWORD
• 5.2. FIRE PREVENTION
• 5.3. REPAIR WELDINGS
• 5.4. SAFETY INSTRUCTIONS
• 5.5. FUEL AND LUBRICANTS
• 5.6. FILLING CAPACITIES
• 5.7. LUBRICATION AND MAINTENANCE SCHEDULE
• 5.7.1. INITIAL SERVICING
• 5.7.2. PERIODIC SERVICING SCHEDULE
• 5.7.3. MAINTENANCE OF THE ENGINE
• 5.8. EVERY 10 HOURS OF OPERATION OR DAILY
• 5.9. EVERY 50 OPERATING HOURS OR WEEKLY
• 5.10. EVERY 250 OPERATING HOURS OR MONTHLY
• 5.11. EVERY 500 OPERATING HOURS OR MONTHLY
• 5.12. EVERY 1000 OPERATING HOURS OR EVERY 6 MONTHS
• 5.13. EVERY 2000 OPERATING HOURS OR YEARLY
• 5.14. EVERY 3000 OPERATING HOURS HOWEVER AT LEAST ONCE A YEAR
• 5.15. WHEN NECESSARY
• 5.16. EXCAVATOR STORAGE
• 5.17. TROUBLE SHOOTING