Komatsu PC600-7 Hydraulic Excavator Field Assembly Instruction GEN00013-01

Description

• Model List:
  • PC600-7 Hydraulic Excavator

• 1. COVER
• 2. FOREWORD
• 3. CONTENTS
• 4. SPECIFICATIONS
• 5. FIELD ASSEMBLING
• 6. ASSEMBLING PROCEDURES, APPLICABLE EQUIPMENT AND SCHEDULE
• 7. TRANSPORTATION
• 8. PACKING STYLE FOR TRANSPORTATION
• 9. LIST OF TOOLS FOR FIELD ASSEMBLING
• 10. STANDARD TIGHTENING TORQUE
• 11. ASSEMBLY OF BASE MACHINE
• 11.1. A1. INSTALLATION OF LEFT AND RIGHT TRACK FRAMES
• 11.2. A2. INSTALLATION OF TRAVEL PIPE
• 11.3. A3. INSTALLATION OF TOP GUARD
• 11.4. A4. INSTALLATION OF REARVIEW MIRROR
• 11.5. A5. INSTALLATION OF HANDRAIL
• 11.6. A6. INSTALLATION OF STEP
• 11.7. A7. INSTALLATION OF LEFT SIDE STEP
• 11.8. A8. STICKING SEAT TO COUNTERWEIGHT
• 11.9. A9. REMOVAL OF MUFFLER TAIL PIPE
• 11.10. A10. INSTALLATION OF COUNTERWEIGHT
• 11.11. A11. INSTALLATION OF MUFFLER TAIL PIPE
• 11.12. A12. INSTALLATION OF ORBCOMM ANTENNA (IF EQUIPPED)
• 11.13. A13. INSTALLATION OF STEP LIGHT
• 11.14. A14. EXTENSION OF TRACK FRAME GAUGE
• 11.15. A15. INSTALLATION OF TRAVEL PIPING COVER
• 11.16. A16. TESTING TRACK SHOE TENSION
• 11.17. A17. INSPECTION OF OIL AMOUNT AND WATER AMOUNT
• 11.18. A18. PARTS TO BE TOUCHED UP AFTER FIELD ASSEMBLY
• 12. ASSEMBLING OF WORK EQUIPMENT
• 12.1. B1. ASSEMBLY OF BOOM FOOT PIN, BOOM CYLINDER FOOT PIN
• 12.2. B2. ASSEMBLY OF BOOM ASSEMBLY
• 12.3. B3. INSTALLATION OF BOOM CYLINDER FOOT
• 12.4. B4. INSTALLATION OF BOOM CYLINDER HOSES
• 12.5. B5. INSTALLATION OF HOSES FROM CHASSIS ALONG TOP OF BOOM
• 12.6. B6. ASSEMBLY OF BOOM CYLINDER
• 12.7. B7. ASSEMBLY OF ARM CYLINDER
• 12.8. B8. INSTALLATION OF ARM CYLINDER HOSES
• 12.9. B9. INSTALLATION OF ARM ASSEMBLY
• 12.10. B10. INSTALLATION OF BUCKET CYLINDER HOSES BETWEEN BOOM AND BUCKET CYLINDER
• 12.11. B11. INSTALLATION OF BUCKET
• 12.12. B12. CONNECTION OF WORK EQUIPMENT GREASE PIPING
• 12.13. B13. CONNECTION OF WORK EQUIPMENT WIRING
• 12.14. B14. GREASING AFTER ASSEMBLING WORK EQUIPMENT
• 13. PROCEDURE FOR INSPECTION AND MAINTENANCE AFTER COMPLETION OF ASSEMBLY
• 13.1. M1. INSPECTION OF OIL LEVEL IN HYDRAULIC TANK AND REFILL
• 13.2. M2. REPLACEMENT OF RETURN FILTER (STANDARD FILTER TO FLUSHING FILTER)
• 13.3. M3. FLUSHING OF HYDRAULIC CIRCUIT
• 14. FIELD ASSEMBLY INSPECTION REPORT (BACKHOE)