Komatsu WB140PS-2, WB150PS-2 Power-Shift Backhoe Loader Operation and Maintenance Manual WEAM002202

Description

• Model List:
  • WB140PS-2 Power-Shift Backhoe Loader
  • WB150PS-2 Power-Shift Backhoe Loader

• 1. MAIN MENU
• 2. COVER
• 3. TABLE OF CONTENTS
• 4. FOREWORD
• 5. INFORMATION ON SAFETY
• 6. INTRODUCTION
• 6.1. Intended Uses
• 6.2. Improper or Unauthrozied Uses
• 6.3. Main Characteristics
• 6.4. RunningIn
• 6.5. Product Identification
• 6.6. Machine Serial Number
• 6.7. Machine Identification Plate
• 6.8. Engine Serial Number and Emission Label
• 6.9. Front Axle Serial Number
• 6.10. Rear Axle Serial Number
• 6.11. Transmission Serial Number
• 6.12. Cab Serial Number
• 6.13. Canopy Serial Number
• 6.14. Serial Numbers and Dealers Address
• 7. SAFETY AND ACCIDENT PREVENTION
• 7.1. General Precautions
• 8. PRECAUTIONS
• 8.1. Precautions to be Taken Before Starting the Engine
• 8.2. Precautions to be Taken When Working
• 8.3. Transporting the Machine on Other Vehicles
• 8.4. The Battery
• 8.5. Precautions for Emergency Recovery
• 8.6. Precautions to be Taken During Maintenance
• 8.7. Safety Plates
• 9. TECHNICAL SPECIFICATIONS
• 9.1. Technical Data
• 10. DESCRIPTION AND USE OF THE MACHINE
• 10.1. Safety Locks
• 10.2. General Views
• 10.3. Instruments and Controls
• 10.4. Fuses and Relays
• 10.5. Guards, Cab and Drivers Seat
• 10.6. Use of the Machine
• 10.7. Parking the Machine
• 10.8. Stopping the Machine
• 10.9. Transporting the Machine on other Vehicles
• 10.10. Precautions to be Taken in the Cold Season
• 10.11. Precautions to be Taken in the Warm Season
• 10.12. Using the Machine as a Loader
• 10.13. Using the Machine as an Excavator
• 10.14. Troubleshooting
• 11. MAINTENANCE
• 11.1. Guide to Maintenance
• 11.2. Maintenance Notes
• 11.3. Fuel, Coolant and Lubricants
• 11.4. Nut and Bolt Tightening Torques
• 11.5. Maintenance Plan
• 12. AUTHORIZED OPTIONAL EQUIPMENT
• 12.1. Authorized Optional Equipment
• 12.2. Front Equipment Quick Coupling Devices
• 12.3. Multipurpose Bucket
• 12.4. Pallet Forks
• 12.5. Backhoe Telescopic Arm
• 12.6. Arrangement for the Installation of the Demolition Hammer
• 12.7. Arrangement for the Operation of Optional Equipment with Unidirectional Oil Flow
• 12.8. Arrangement for the Installation of the Clamshell Bucket
• 12.9. Arrangement for the Installation of the Manual Hydraulic Hammer
• 12.10. Load Stabilizer System ( LSS ) (Optional)
• 12.11. Air Conditioner