Description
-
Model List:
- BW 211 D-40 Single Drum Roller
- BW 211 PD-40 Single Drum Roller
- BW 212 D-40 Single Drum Roller
- BW 212 PD-40 Single Drum Roller
- BW 213 D-40 Single Drum Roller
- BW 213 PD-40 Single Drum Roller
- 1. BW 211 / 212 / 213 D40
- 2. BW 211 / 212 / 213 PD40
- 3. Single drum roller
- 4. General notes
- 5. Description of indicators and control elements
- 6. Display and control elements BTM
- 7. Description of indicating and control elements BTM
- 8. Line diagram (EVIB)
- 9. Description of line diagram (EVIB)
- 10. Bar diagram (EVIB)
- 11. General
- 12. Tests before taking into operation
- 13. Electronic immobilizer
- 14. Starting the engine
- 15. Starting with jump wires
- 16. Driving the machine
- 17. Stopping the machine, operating the parking brake
- 18. Shutting down the engine
- 19. Switching the vibration on and off
- 20. What to do in events of emergency
- 21. Adjusting the seat
- 22. Operating the heating/air conditioning system
- 23. Operating the hood
- 24. Towing in case of an engine failure
- 25. Transport
- 26. BVC/BTM05 settings before startup
- 27. Measuring pass with BTM
- 28. Finishing compaction of a track
- 29. Printing measuring data after completing compaction
- 30. Changing the paper roll in the measuring value printer
- 31. Changing the printer ribbon in the measuring value printer
- 32. General notes on maintenance
- 33. Fuels and lubricants
- 34. Table of fuels and lubricants
- 35. Runningin instructions
- 36. Maintenance table
- 37. Check the engine oil level
- 38. Checking the fuel level
- 39. Check the coolant level
- 40. Check the hydraulic oil level
- 41. Check, clean the water separator
- 42. Checking the tire pressure
- 43. Clean the cooling fins on engine and hydraulic oil cooler
- 44. Check the oil level in the drive axle
- 45. Checking the oil level in left/ right wheel hubs
- 46. Check the oil level in the vibration bearings
- 47. Checking, replacing the refrigerant compressor V belt
- 48. Changing engine oil and oil filter
- 49. Draining the fuel tank sludge
- 50. Battery service
- 51. Service the air conditioning
- 52. Cleaning the circulation air filter for the heating
- 53. Check, adjust the valve clearance
- 54. Change the fuel filter cartridge
- 55. Change the fuel prefilter cartridge
- 56. Checking / replacing the ribbed Vbelt
- 57. Check the engine mounts
- 58. Change the oil in the vibration bearings
- 59. Change the oil in thedrive axle
- 60. Changing the oil in the wheel hubes
- 61. Retighten the fastening of the axle on the frame
- 62. Tightening the wheel nuts
- 63. Checking the ROPS
- 64. Check the travel control
- 65. Changing hydraulic oil and breather filter
- 66. Changing the hydraulic oil filter
- 67. Changing the coolant
- 68. Checking the injection valves
- 69. Air filter maintenance
- 70. Adjusting the scrapers
- 71. Clean the machine
- 72. Adjust the parking brake
- 73. Changing the tires
- 74. Change the fresh air filter in the cabin
- 75. Fill the provision tank for the windscreen washer system
- 76. Tightening torques
- 77. Engine conservation
- 78. General notes
- 79. Reading out faults BVC/ BTM05
- 80. Engine
- 81. Preparations
- 82. Cabin assembly
- 83. Final function tests and checks
There are no reviews yet.