Description
-
Model List:
- PW130-7K Wheeled Excavator
- 1. FOREWORD
- 1.1. FOREWORD
- 1.2. SAFETY INFORMATION
- 1.2.1. SAFETY MESSAGES
- 1.2.2. Noise emission levels
- 1.2.3. Vibration levels
- 1.2.4. EMERGENCY STEERING
- 1.3. INTRODUCTION
- 1.3.1. INTENDED USE
- 1.3.2. FEATURES
- 1.3.3. BREAKING IN YOUR NEW MACHINE
- 1.4. LOCATIONS OF PLATES, TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 1.4.1. MACHINE SERIAL NO. PLATE POSITION
- 1.4.2. ENGINE SERIAL NO. PLATE POSITION
- 1.4.3. TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
- 1.4.4. MACHINE SERIAL PLATES
- 2. SAFETY
- 2.1. GENERAL PRECAUTIONS
- 2.2. PRECAUTION DURING OPERATION
- 2.2.1. BEFORE STARTING ENGINE
- 2.2.2. OPERATING MACHINE
- 2.2.3. TRANSPORTATION
- 2.2.4. BATTERY
- 2.2.5. TOWING
- 2.2.6. BUCKET WITH HOOK OR BUCKET LINK WITH LIFTING EYE
- 2.3. PRECAUTIONS FOR MAINTENANCE
- 2.3.1. BEFORE CARRYING OUT MAINTENANCE
- 2.3.2. DURING MAINTENANCE
- 2.4. POSITION FOR ATTACHING SAFETY LABELS
- 2.4.1. POSITION FOR ATTACHING SAFETY LABELS
- 2.5. LIFTING CAPACITY CHART PW1307K
- 2.5.1. ONE PIECE BOOM Lift capacity tables
- 2.5.2. TWO PIECE BOOM Lift capacity tables
- 2.5.3. OVERLOAD CAUTION
- 3. OPERATION
- 3.1. GENERAL VIEW
- 3.1.1. GENERAL VIEW OF MACHINE
- 3.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
- 3.2. EXPLANATION OF COMPONENTS
- 3.2.1. MACHINE MONITOR
- 3.2.2. BASIC CHECK ITEMS
- 3.3. SWITCHES
- 3.4. CONTROL LEVERS, PEDALS
- 3.4.1. FRONT WINDOW
- 3.4.2. EMERGENCY EXIT FROM OPERATORS CAB
- 3.4.3. CAP, COVER WITH LOCK
- 3.4.4. FUSE
- 3.4.5. LUGGAGE TRAY
- 3.4.6. ASHTRAY
- 3.4.7. CUP HOLDER
- 3.4.8. HOT AND COOL BOX
- 3.4.9. CAB RADIO
- 3.4.10. POWER PICKUP PORT
- 3.4.11. HANDLING AIR CONDITIONER
- 3.4.12. FUSIBLE LINK
- 3.4.13. CONTROLLER
- 3.4.14. TOOL BOX (CHASSIS)
- 3.4.15. REFUELLING PUMP
- 3.4.16. WARNING LAMPS
- 3.4.17. HANDLING ACCUMULATORS
- 3.5. OPERATION
- 3.5.1. CHECK BEFORE STARTING ENGINE
- 3.6. OPERATIONS AND CHECKS BEFORE STARTING ENGINE
- 3.6.1. STARTING ENGINE
- 3.6.2. MOVING MACHINE OFF
- 3.6.3. STEERING
- 3.6.4. TRAVELLING ON PUBLIC HIGHWAY
- 3.6.5. STOPPING PARKING
- 3.6.6. SWINGING (Slewing the upper carriage)
- 3.6.7. OPERATION OF WORK EQUIPMENT
- 3.6.8. WORKING MODE SELECTION
- 3.6.9. PROHIBITIONS FOR OPERATION
- 3.6.10. PRECAUTIONS FOR OPERATION
- 3.6.11. RECOMMENDATIONS FOR TRAVELLING
- 3.6.12. PRECAUTIONS WHEN TRAVELLING UP OR DOWN HILLS
- 3.6.13. HOW TO ESCAPE FROM MUD
- 3.6.14. WORK POSSIBLE USING HYDRAULIC EXCAVATOR
- 3.6.15. REPLACEMENT AND INVERSION OF BUCKET
- 3.6.16. STOPPING ENGINE
- 3.6.17. CHECK AFTER FINISHING WORK
- 3.7. CHECK AFTER STOPPING ENGINE
- 3.7.1. LOCKING
- 3.7.2. OVERLOAD WARNING DEVICE
- 3.7.3. HANDLING THE WHEELS
- 3.8. TRANSPORTATION
- 3.8.1. LOADING, UNLOADING WORK
- 3.8.2. PRECAUTIONS FOR LOADING
- 3.8.3. PRECAUTIONS FOR TRANSPORTATION
- 3.8.4. TRAVELLING POSTURE
- 3.9. COLD WEATHER OPERATION
- 3.9.1. PRECAUTIONS FOR LOW TEMPERATURE
- 3.9.2. PRECAUTIONS AFTER COMPLETION OF WORK
- 3.9.3. AFTER COLD WEATHER
- 3.10. LONGTERM STORAGE
- 3.10.1. BEFORE STORAGE
- 3.10.2. DURING STORAGE
- 3.10.3. AFTER STORAGE
- 3.10.4. STARTING MACHINE AFTER LONGTERM STORAGE
- 3.11. TROUBLESHOOTING
- 3.11.1. PHENOMENA THAT ARE NOT FAILURES
- 3.11.2. METHOD OF TOWING MACHINE
- 3.11.3. PRECAUTIONS ON PARTICULAR JOBSITES
- 3.11.4. DISCHARGED BATTERY
- 3.11.5. OTHER TROUBLE
- 4. MAINTENANCE
- 4.1. GUIDES TO MAINTENANCE
- 4.2. OUTLINE OF SERVICE
- 4.2.1. OUTLINE OF OIL, FUEL, COOLANT
- 4.2.2. OUTLINE OF ELECTRIC SYSTEM
- 4.2.3. OUTLINE OF HYDRAULIC SYSTEM
- 4.3. WEAR PARTS LIST
- 4.4. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
- 4.4.1. PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS
- 4.5. USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE CONT.
- 4.6. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
- 4.6.1. INTRODUCTION OF NECESSARY TOOLS
- 4.7. TIGHTENING TORQUE SPECIFICATIONS
- 4.7.1. TIGHTENING TORQUE LIST
- 4.8. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
- 4.8.1. SAFETY CRITICAL PARTS
- 4.9. MAINTENANCE SCHEDULE CHART
- 4.9.1. KEY TO LUBRICATION POINTS
- 4.10. SERVICE PROCEDURE
- 4.10.1. INITIAL 250 HOURS SERVICE
- 4.10.2. WHEN REQUIRED
- 4.10.3. CHECK AND TIGHTEN WHEEL NUTS
- 4.10.4. CHECK ELECTRICAL INTAKE AIR HEATER
- 4.10.5. CHECK ALTERNATOR
- 4.10.6. REPLACE BUCKET SIDE CUTTERS
- 4.10.7. REPLACE BUCKET TEETH
- 4.10.8. CHECK BEFORE STARTING
- 4.10.9. EVERY 50 HOURS
- 4.10.10. EVERY 100 HOURS SERVICE
- 4.10.11. EVERY 250 HOURS MAINTENANCE
- 4.10.12. EVERY 500 HOURS SERVICE
- 4.10.13. EVERY 1000 HOURS SERVICE
- 4.10.14. EVERY 2000 HOURS SERVICE
- 4.10.15. EVERY 4000 HOURS SERVICE
- 4.10.16. EVERY 5000 HOURS SERVICE
- 5. SPECIFICATIONS
- 5.1. SPECIFICATIONS
- 5.1.1. PIECE BOOM
- 5.1.2. PIECE BOOM
- 5.1.3. WORKING RANGE ONE PIECE BOOM
- 5.1.4. WORKING RANGE TWO PIECE BOOM
- 6. OPTIONS, ATTACHMENTS
- 6.1. GENERAL PRECAUTIONS
- 6.1.1. PRECAUTIONS RELATED TO SAFETY
- 6.2. PRECAUTIONS WHEN INSTALLING ATTACHMENTS
- 6.3. HANDLING BUCKET WITH HOOK
- 6.3.1. CHECKING FOR DAMAGE TO BUCKET WITH HOOK
- 6.3.2. PROHIBITED OPERATIONS
- 6.3.3. PRECAUTIONS DURING OPERATIONS
- 6.4. MACHINES READY FOR ATTACHMENTS
- 6.4.1. GENERAL LOCATIONS
- 6.4.2. HANDLING THE CLAMSHELL BUCKET
- 6.4.3. OPERATION
- 6.4.4. METHOD FOR RELEASING PRESSURE IN CONTROL CIRCUIT OF MACHINES EQUIPPED WITH ACCUMULATOR
- 6.4.5. LONGTERM STORAGE
- 6.5. INTRODUCTION OF ATTACHMENTS AND EXTENDING MACHINE SERVICE LIFE
- 6.5.1. HYDRAULIC BREAKER
- 6.5.2. POWER RIPPER
- 6.5.3. FORK GRAB
- 6.5.4. GRAPPLE BUCKET
- 6.5.5. SCRAP GRAPPLE
- 6.5.6. CRUSHER SMASHER
- 6.5.7. HYDRAULIC PILE DRIVER
- 6.5.8. HYDRAULIC EXCAVATOR WITH MULTIPURPOSE CRANE
There are no reviews yet.