Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301
Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301 - Image 2
Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301 - Image 3
Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301 - Image 4
Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301 - Image 5

Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301

$30.00

  • Type Of Manual: Operation and Maintenance Manual
  • Manual ID: CEAM014301
  • Format: PDF
  • Size: 26.0MB
  • Number of Pages: 236
Category:

Description

  • Model List:

    • SK1026-5N Skid Steer Loader
  • 1. CEAM014301 SK10265N
  • 2. INTRODUCTION
  • 2.1. FOREWORD
  • 2.2. SAFETY INFORMATION
  • 2.3. APPROVED AND NONAPPROVED USES
  • 2.3.1. Approved
  • 2.3.2. NonApproved
  • 2.4. PRODUCT INFORMATION
  • 2.4.1. Main Features
  • 2.4.2. BreakIn Period
  • 2.4.3. Synthetic Biodegradable Oil Type HEES
  • 2.5. PRODUCT IDENTIFICATION
  • 2.5.1. Machine Serial Number
  • 2.5.2. Machine Identification Plate
  • 2.5.3. Engine Serial Number and Emission Label
  • 2.5.4. Travel Reduction Gear Serial Number
  • 2.5.5. Cab Serial Number
  • 2.5.6. Backhoe Identification Plate (If Installed)
  • 2.6. SERIAL NUMBERS AND DEALER INFORMATION
  • 2.7. TABLE OF CONTENTS
  • 3. SAFETY
  • 3.1. GENERAL SAFETY RULES AND PRECAUTIONS
  • 3.1.1. General Safety Rules
  • 3.1.2. Safety Features
  • 3.1.3. Personal Protective Equipment
  • 3.1.4. Unauthorized Modifications
  • 3.1.5. Leaving Operators Compartment
  • 3.1.6. Mounting and Dismounting
  • 3.1.7. RearView Mirrors
  • 3.1.8. Fire Prevention for Fuel and Oil
  • 3.1.9. Dust Hazard Precautions
  • 3.1.10. Crush or Pinch Point Dangers
  • 3.1.11. Fire Extinguisher and First Aid Kit
  • 3.1.12. Inside Operators Compartment
  • 3.1.13. Precautions when using ROPS
  • 3.1.14. Precautions for all Attachments
  • 3.2. PRECAUTIONS BEFORE STARTING WORK OPERATIONS
  • 3.2.1. General PreOperational Checks
  • 3.2.2. Starting Work Operations
  • 3.2.3. Work Site Hazards
  • 3.2.4. Working Clearances
  • 3.2.5. Rules for Road Travel
  • 3.2.6. Rules for Traveling in Reverse
  • 3.2.7. Traveling on Icy or Snow Covered Surfaces
  • 3.2.8. Working on Loose or Unstable Ground
  • 3.3. PRECAUTIONS DURING MAINTENANCE OPERATIONS
  • 3.3.1. Warning Tags
  • 3.3.2. Equipment Storage
  • 3.3.3. Working Under the Machine
  • 3.3.4. Using Drop Lamps
  • 3.3.5. Keeping the Machine Clean
  • 3.3.6. Rules for Refueling the Machine
  • 3.3.7. Cooling System Precautions
  • 3.3.8. Battery Precautions
  • 3.3.9. Starting the Machine
  • 3.3.10. High Pressure Hoses
  • 3.3.11. High Temperatures Areas
  • 3.3.12. Rotating Parts
  • 3.3.13. Disposal of Waste Materials
  • 3.3.14. Inflating Tires
  • 3.3.15. Critical Parts
  • 3.4. SAFETY AND WARNING DECALS
  • 3.4.1. Location of Safety Decals
  • 3.4.2. Location of Pictogram Decals
  • 4. OPERATION
  • 4.1. GENERAL VIEW OF MACHINE
  • 4.1.1. Location of Pictogram Decals and Front View
  • 4.1.2. Rear View of Machine
  • 4.1.3. Additional Pictograms
  • 4.2. LOCATION AND FUNCTION OF IN CAB MACHINE CONTROLS
  • 4.2.1. Cab View From Operators Position
  • 4.3. INSTRUMENT PANEL AND SWITCHES
  • 4.3.1. Instrument Panel
  • 4.3.2. Indicator Lights
  • 4.3.3. Switches and Push Buttons
  • 4.4. LOCATION AND FUNCTIONS OF OUTSIDE MACHINE
  • 4.4.1. Fluid Fill and Check Locations
  • 4.5. SAFETY LOCKS AND SECURITY
  • 4.5.1. Ignition Switch
  • 4.5.2. Hood Lock
  • 4.5.3. Loader Arm Support
  • 4.5.4. Master Electrical Disconnect
  • 4.6. PATTERN CONTROL SYSTEM
  • 4.6.1. Changing Pattern Control
  • 4.6.2. ISO Pattern Control
  • 4.6.3. Optional Pattern Control
  • 4.7. FUSES AND RELAYS
  • 4.7.1. System Fuses
  • 4.7.2. Main Fuse
  • 4.7.3. Relays
  • 4.8. STARTING THE MACHINE
  • 4.8.1. StartUp Preparations
  • 4.8.2. Starting the Engine
  • 4.9. GENERAL TRAVEL WITH THE MACHINE
  • 4.9.1. Travel Route
  • 4.9.2. Travel on Hills or Slopes
  • 4.9.3. Traveling with a Load
  • 4.9.4. Traveling in Water
  • 4.10. TRAVELING IN ISO OR OPTIONAL PATTERN
  • 4.10.1. Operating in ISO Pattern
  • 4.10.2. Operating in Optional Pattern
  • 4.11. PARKING THE MACHINE
  • 4.11.1. Parking on Level Ground
  • 4.11.2. Parking on Slopes
  • 4.12. USING THE WORK EQUIPMENT
  • 4.12.1. Situations to Avoid
  • 4.12.2. Cutting a Grade and Leveling
  • 4.12.3. Loading Material
  • 4.13. CHANGING BUCKET OR ATTACHMENT
  • 4.13.1. Locking the Bucket or Attachment
  • 4.13.2. Unlocking the Bucket or Attachment
  • 4.13.3. Removing the Bucket or Attachment
  • 4.13.4. Attaching the Bucket
  • 4.13.5. Checking Position of the Locking Pins
  • 4.13.6. Adjusting the Locking Pins
  • 4.14. TRANSPORTING THE MACHINE
  • 4.14.1. Loading and Unloading the Machine
  • 4.14.2. Transport
  • 4.14.3. Emergency Recovery
  • 4.14.4. Lifting the Machine
  • 4.15. PRECAUTIONS DURING SEASONAL CHANGES
  • 4.15.1. Cold Seasons
  • 4.15.2. Warm Seasons
  • 4.16. LONG PERIODS OF INACTIVITY
  • 4.16.1. Before Inactivity
  • 4.16.2. After Inactivity
  • 4.17. BASIC TROUBLESHOOTING
  • 4.17.1. The Battery
  • 4.17.2. Electrical Circuits
  • 4.17.3. Hydraulic System
  • 4.17.4. Engine
  • 4.17.5. Hydrostatic Transmission
  • 4.18. ADDTIONAL PRECAUTIONS TO BE TAKEN
  • 4.18.1. Using Synthetic Biodegradable Oil Type HEES
  • 4.18.2. Critical Parts
  • 5. MAINTENANCE
  • 5.1. GUIDE TO MAINTENANCE
  • 5.2. MAINTENANCE NOTES
  • 5.2.1. Notes Regarding The Engine
  • 5.2.2. Notes Regarding the Hydraulic System
  • 5.2.3. Notes Regarding The Electrical System
  • 5.2.4. Notes Regarding Lubrication
  • 5.3. FUEL, COOLANT AND LUBRICANTS
  • 5.3.1. Proper Selection Of Fuel, Coolant And Lubricants
  • 5.3.2. Lubrication with Grease
  • 5.4. HOMOLOGATED (HEES) SYNTHETIC BIODEGRADABLE LUBRICANTS
  • 5.5. DRIVING TORQUES FOR SCREWS AND NUTS
  • 5.5.1. Standard Driving Torques
  • 5.5.2. Specific Driving Torques
  • 5.6. LUBRICATION
  • 5.6.1. Lubrication Diagram
  • 5.7. PERIODICAL CHANGE OF THE COMPONENTS CONNECTED WITH SAFETY
  • 5.7.1. Critical Parts For Safety
  • 5.8. MAINTENANCE SCHEDULE CHART
  • 5.9. MAINTENANCE PROCEDURES
  • 5.9.1. Servicing When Required
  • 5.9.2. Checks Before Starting
  • 5.9.3. Initial 50 Hours Service
  • 5.9.4. Every 50 Hours Service
  • 5.9.5. Initial 250 Hours Service
  • 5.9.6. Every 250 Hours Service
  • 5.9.7. Initial 500 Hours Service
  • 5.9.8. Every 500 Hours Service
  • 5.9.9. Every 1000 Hours Service
  • 5.9.10. Every 2000 Hours Service
  • 6. SPECIFICATIONS
  • 6.1. TECHNICAL DATA
  • 6.1.1. Standard Machine Overall Dimensions
  • 6.1.2. Machine Overall Dimensions With Optional Equipment
  • 6.1.3. Technical Characteristics
  • 7. OPTIONS, ATTACHMENTS
  • 7.1. AUTHORIZED OPTIONAL EQUIPMENT
  • 7.1.1. Basic Precautions
  • 7.1.2. Optional Equipment Measurements
  • 7.2. CHANGING AUTHORIZED EQUIPMENT
  • 7.2.1. Connecting the Backhoe
  • 7.2.2. Connecting The Hydraulic Circuit
  • 7.2.3. Connecting Direct Drain Circuit
  • 7.3. PREPARING THE MACHINE FOR THE BACKHOE
  • 7.3.1. Using the Machine with the Backhoe
  • 7.3.2. Backhoe Locks (If Installed)
  • 7.4. PALLET FORKS
  • 7.5. COLD PLANER LOCKS (IF INSTALLED)
  • 7.6. HAND AND FOOT CONTROL SYSTEM
  • 7.6.1. Machine Controls
  • 7.6.2. Travel and Steering Control Levers
  • 7.6.3. Work Equipment Control Pedals
  • 7.6.4. Auxiliary Hydraulic Control Lever
Rate this product

Reviews

There are no reviews yet.

Be the first to review “Komatsu SK1026-5N Skid Steer Loader Operation and Maintenance Manual CEAM014301”

Your email address will not be published. Required fields are marked *

Related products