Komatsu WB93R-5 Backhoe Loader Operation and Maintenance Manual WEAM006000

Description

• Model List:
  • WB93R-5 Backhoe Loader

• 1. FOREWORD
• 2. INFORMATION ON SAFETY
• 3. INTRODUCTION
• 4. PRODUCT IDENTIFICATION
• 5. TABLE OF CONTENTS
• 6. SAFETY, NOISE AND VIBRATION PLATES
• 7. GENERAL PRECAUTIONS
• 8. PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
• 9. PRECAUTIONS TO BE TAKEN DURING WORK
• 10. TRANSPORTING THE MACHINE ON OTHER VEHICLES
• 11. BATTERY
• 12. PRECAUTIONS FOR EMERGENCY RECOVERY
• 13. PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
• 14. SAFETY LOCKS
• 15. GENERAL VIEWS
• 16. INSTRUMENTS AND CONTROLS
• 17. FUSES AND RELAYS
• 18. GUARDS, CAB AND DRIVERS SEAT
• 19. USE OF THE MACHINE
• 20. PARKING THE MACHINE
• 21. STOPPING THE ENGINE
• 22. TRANSPORTING THE MACHINE ON OTHER VEHICLES
• 23. PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
• 24. PRECAUTIONS TO BE TAKEN AT THE END OF THE WINTER
• 25. USING THE MACHINE AS A LOADER
• 26. USING THE MACHINE AS AN EXCAVATOR
• 27. LONG PERIODS OF INACTIVITY
• 28. TROUBLESHOOTING
• 29. GUIDE TO MAINTENANCE
• 30. MAINTENANCE NOTES
• 31. FUEL, COOLANT AND LUBRICANTS
• 32. DRIVING TORQUES
• 33. LUBRICATION
• 34. PERIODICAL CHANGE OF THE SAFETY RELATED COMPONENTS
• 35. MAINTENANCE PLAN
• 36. MAINTENANCE PROCEDURES
• 37. TECHNICAL DATA
• 38. AUTHORIZED OPTIONAL EQUIPMENT
• 39. FRONT EQUIPMENT QUICK COUPLING DEVICES
• 40. n1 BUCKET
• 41. PALLET FORKS
• 42. BACKHOE TELESCOPIC ARM
• 43. CONFIGURATION FOR THE INSTALLATION OF THE DEMOLITION HAMMER
• 44. APPLICATION OF THE OFFSET DEVICE
• 45. CONFIGURATION FOR THE USE OF OPTIONAL EQUIPMENT WITH UNIDIRECTIONAL OIL FLOW
• 46. CONFIGURATION FOR THE USE OF THE CLAMSHELL BUCKET
• 47. CONFIGURATION FOR THE USE OF THE HAND HYDRAULIC HAMMER
• 48. LOAD STABILIZER SYSTEM (LSS) (Optional)
• 49. REAR EQUIPMENT MECHANICAL QUICK COUPLING DEVICE