Komatsu PC02-1A Hydraulic Excavator Operation and Maintenance Manual SEAM005700

Description

• Model List:
  • PC02-1A Hydraulic Excavator

• 1. COVER
• 2. FOREWORD
• 3. SAFETY INFORMATION
• 4. INTRODUCTION
• 5. LOCATION OF PLATES,TABLE TO ENTER SERIAL NO. AND DISTRIBUTOR
• 6. CONTENTS
• 7. SAFETY
• 7.1. GENERAL PRECAUTIONS
• 7.2. PRECAUTIONS DURING OPERATION
• 7.2.1. BEFORE STARTING ENGINE
• 7.2.2. OPERATING MACHINE
• 7.2.3. TRANSPORTATION
• 7.2.4. BATTERY
• 7.2.5. TOWING
• 7.2.6. BUCKET WITH HOOK
• 7.3. PRECAUTIONS FOR MAINTENANCE
• 7.3.1. BEFORE CARRYING OUT MAINTENANCE
• 7.3.2. DURING MAINTENANCE
• 7.4. POSITION FOR ATTACHING SAFETY LABELS
• 8. OPERATION
• 8.1. GENERAL VIEW
• 8.1.1. GENERAL VIEW OF MACHINE
• 8.1.2. GENERAL VIEW OF CONTROLS AND GAUGES
• 8.2. EXPLANATION OF COMPONENTS
• 8.2.1. METERS,LAMPS
• 8.2.2. SWITCHES
• 8.2.3. CONTROL LEVERS,PEDALS
• 8.2.4. ENGINE HOOD
• 8.2.5. FUSE CASE
• 8.3. OPERATION
• 8.3.1. CHECK BEFORE STARTING ENGINE
• 8.3.2. STARTING ENGINE
• 8.3.3. OPERATION AND CHECK AFTER STARTING ENGINE
• 8.3.4. MOVING MACHINE OFF
• 8.3.5. STEERING MACHINE
• 8.3.6. STOPPING MACHINE
• 8.3.7. SWINGING
• 8.3.8. OPERATION OF WORK EQUIPMENT
• 8.3.9. PROHIBITIONS FOR OPERATION
• 8.3.10. PRECAUTIONS FOR OPERATION
• 8.3.11. PRECAUTIONS WHEN TRAVELING UP OR DOWN HILLS
• 8.3.12. HOW TO ESCAPE FROM MUD
• 8.3.13. WORK POSSIBLE USING HYDRAULIC EXCAVATOR
• 8.3.14. REPLACEMENT OF BUCKET
• 8.3.15. HANDLING RUBBER SHOES
• 8.3.16. PARKING MACHINE
• 8.3.17. CHECKS AFTER FINISHING WORK
• 8.3.18. STOPPING ENGINE
• 8.3.19. CHECKS AFTER STOPPING ENGINE
• 8.4. TRANSPORTATION
• 8.4.1. LOADING,UNLOADING WORK
• 8.4.2. METHOD OF LIFTING MACHINE
• 8.4.3. PRECAUTIONS FOR LOADING
• 8.4.4. PRECAUTIONS FOR TRANSPORTATION
• 8.5. COLD WEATHER OPERATION
• 8.5.1. PRECAUTIONS FOR LOW TEMPERATURE
• 8.5.2. PRECAUTIONS AFTER COMPLETION OF WORK
• 8.5.3. AFTER COLD WEATHER
• 8.6. LONGTERM STORAGE
• 8.6.1. BEFORE STORAGE
• 8.6.2. DURING STORAGE
• 8.6.3. AFTER STORAGE
• 8.7. TROUBLESHOOTING
• 8.7.1. PHENOMENA THAT ARE NOT FAILURES
• 8.7.2. METHOD OF TOWING MACHINE
• 8.7.3. IF BATTERY IS DISCHARGED
• 8.7.4. OTHER TROUBLE
• 9. MAINTENANCE
• 9.1. GUIDES TO MAINTENANCE
• 9.2. OUTLINES OF SERVICE
• 9.2.1. OUTLINE OF OIL,FUEL
• 9.2.2. OUTLINE OF ELECTRIC SYSTEM
• 9.2.3. OUTLINE OF HYDRAULIC SYSTEM
• 9.3. WEAR PARTS LIST
• 9.4. USE OF FUEL AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
• 9.5. STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS
• 9.5.1. INTRODUCTION OF NECESSARY TOOLS
• 9.5.2. TORQUE LIST
• 9.6. PERIODIC REPLACEMENT OF SAFETY CRITICAL PARTS
• 9.7. MAINTENANCE SCHEDULE CHART
• 9.7.1. MAINTENANCE SCHEDULE CHART
• 9.7.2. MAINTENANCE INTERVAL WHEN USING HYDRAULIC BREAKER
• 9.8. SERVICE PROCEDURE
• 9.8.1. INITIAL 20 HOURS SERVICE
• 9.8.2. INITIAL 100 HOURS SERVICE
• 9.8.3. INITIAL 500 HOURS SERVICE
• 9.8.4. WHEN REQUIRED
• 9.8.5. CHECK BEFORE STARTING
• 9.8.6. EVERY 100 HOURS SERVICE
• 9.8.7. EVERY 500 HOURS SERVICE
• 9.8.8. EVERY 1000 HOURS SERVICE
• 9.8.9. EVERY 2000 HOURS SERVICE
• 10. SPECIFICATIONS
• 10.1. SPECIFICATIONS
• 11. OPTIONS,ATTACHMENTS
• 11.1. GENERAL PRECAUTIONS
• 11.1.1. PRECAUTIONS RELATED TO SAFETY
• 11.2. INTRODUCTION OF OPTIONAL PARTS AND ATTACHMENTS
• 11.2.1. SPECIFICATIONS,USES
• 11.2.2. ATTACHMENTS INSTALLATION COMBINATION
• 11.3. HANDLING BUCKET WITH HOOK
• 11.3.1. CHECKING FOR DAMAGE TO BUCKET WITH HOOK
• 11.3.2. PROHIBITED OPERATIONS
• 11.3.3. PRECAUTIONS DURING OPERATIONS