Description
-
Model List:
- BW 213 DH-4 Single Drum Roller
- BW 213 PDH-4 Single Drum Roller
- BVC With Attachment Plate Single Drum Roller
- 1. BW 213 DH4 / PDH4
- 2. BVC with attachment plates
- 3. Single drum roller
- 4. General notes
- 5. Description of indicators and control elements
- 6. Display and control elements Variocontrol
- 7. Description of indicating and control elements Variocontrol
- 8. Line diagram Automatic (EVIB)
- 9. Description of line diagram Automatic (EVIB)
- 10. Line diagram Manual (EVIB)
- 11. Description of line diagram Manual (EVIB)
- 12. Bar diagram (EVIB)
- 13. General notes
- 14. Tests before taking into operation
- 15. Starting the engine
- 16. Starting with jump wires
- 17. Driving the machine
- 18. Switching the vibration on and off
- 19. Operating the parking brake, stopping the machine
- 20. Shutting the engine down
- 21. Changing the LCDdisplay
- 22. Emergency exit
- 23. Adjusting the seat
- 24. Operating the hood
- 25. Towing in case of an engine failure
- 26. Transport
- 27. Tests before starting to operate
- 28. Mounting the attachment plates
- 29. Taking the attachment plates into service
- 30. Detaching the attachment plates
- 31. Variocontrol, selecting the operating mode
- 32. Measuring pass with Variocontrol
- 33. Finishing compaction of a track
- 34. Printing measuring data after completing compaction
- 35. Teaching distance pulses
- 36. Amplitude limitation (BVC only)
- 37. Changing the paper roll in the measuring value printer
- 38. Changing the printer ribbon in the measuring value printer
- 39. General notes on maintenance
- 40. Fuels and lubricants
- 41. Table of fuels and lubricants
- 42. Runningin instructions
- 43. Maintenance chart
- 44. Check the engine oil level
- 45. Check, clean the water separator
- 46. Check the fuel level
- 47. Check the hydraulic oil level
- 48. Check the coolant level
- 49. Checking the dust separator on the oil bath air filter
- 50. Checking the tire pressure
- 51. Clean the cooling fins on engine and hydraulic oil cooler
- 52. Check the oil level in the drive axle
- 53. Checking the oil level in left/ right wheel hubs
- 54. Check the oil level in the axle reduction gear
- 55. Check the oil level in the drum reduction gear
- 56. Checking the Vario exciter oil level
- 57. Changing engine oil and oil filter cartridges
- 58. Change the fuel filter cartridge
- 59. Draining the sludge from the fuel tank
- 60. Service the battery
- 61. Change the fuel prefilter cartridge
- 62. Checking, replacing the refrigerant compressor Vbelt
- 63. Service the air conditioning
- 64. Adjusting the valve clearance
- 65. Adjusting the control piston play
- 66. Checking / replacing the ribbed Vbelt
- 67. Check the engine mounts
- 68. Change the oil in the drive axle
- 69. Changing the oil in the wheel hubs
- 70. Changing the oil in the axle reduction gear
- 71. Change the oil in the drum reduction gear
- 72. Vario exciter oil change
- 73. Change the oil in the exciter shaft housing of the attachment plates
- 74. Tightening the fastening of the axle to the frame
- 75. Tightening the wheel nuts
- 76. Check the ROPS
- 77. Cleaning the oil bath air filter
- 78. Changing hydraulic oil and breather filter
- 79. Changing the hydraulic oil filter
- 80. Changing the steering oil filter
- 81. Changing the attachment plate oil filter
- 82. Change the coolant
- 83. Replacing the crank case ventilation valve
- 84. Electronic injector test EMR
- 85. Service the combustion air filter
- 86. Adjust the scrapers
- 87. Adjust the parking brake
- 88. Change the tires
- 89. Change the fresh air filter in the cabin
- 90. Tightening torques
- 91. Engine conservation
- 92. General notes
- 93. Reading out faults BVC/ BTM05
- 94. Engine
- 95. Preparations
- 96. Cabin assembly
- 97. Final function tests and checks
There are no reviews yet.