Description
-
Model List:
- BW 226 DH-4 Single Drum Roller
- BW 226 PDH-4 Single Drum Roller
- 1. BW 226 DH4 / PDH4
- 2. Single drum roller
- 3. General notes
- 4. Description of indicators and control elements
- 5. Display and control elements BTM
- 6. Description of indicating and control elements BTM
- 7. Line diagram (EVIB)
- 8. Description of line diagram (EVIB)
- 9. Bar diagram (EVIB)
- 10. General notes
- 11. Tests before taking into operation
- 12. Disarming the antitheft protection
- 13. Starting the engine
- 14. Starting with jump wires
- 15. Driving the machine
- 16. Switching the vibration on and off
- 17. Operating the parking brake, stopping the machine
- 18. Shut down the engine
- 19. Changing the LCDdisplay
- 20. Emergency exit
- 21. Adjusting the seat
- 22. Operating the hood
- 23. Towing in case of an engine failure
- 24. Transport
- 25. BVC/BTM05 settings before startup
- 26. Measuring pass with BTM
- 27. Finishing compaction of a track
- 28. Printing measuring data after completing compaction
- 29. Changing the paper roll in the measuring value printer
- 30. Changing the printer ribbon in the measuring value printer
- 31. General notes on maintenance
- 32. Fuels and lubricants
- 33. Table of fuels and lubricants
- 34. Runningin instructions
- 35. Maintenance chart
- 36. Check the engine oil level
- 37. Check, clean the water separator
- 38. Check the fuel level
- 39. Check the hydraulic oil level
- 40. Check the coolant level
- 41. Checking the dust separator on the oil bath air filter
- 42. Grease the articulated joint
- 43. Checking the tire pressure
- 44. Clean the cooling fins on engine and hydraulic oil cooler
- 45. Check the oil level in the drive axle
- 46. Check the oil level in the wheel hubs
- 47. Check the oil level in the axle reduction gear
- 48. Check the oil level in the drum reduction gear
- 49. Check the oil level in the vibration bearings
- 50. Changing engine oil and oil filter cartridges
- 51. Change the fuel filter cartridge
- 52. Draining the sludge from the fuel tank
- 53. Service the battery
- 54. Change the fuel prefilter cartridge
- 55. Checking, replacing the refrigerant compressor V belt
- 56. Service the air conditioning
- 57. Adjusting the valve clearance
- 58. Checking / replacing the ribbed Vbelt
- 59. Check the engine mounts
- 60. Checking the engine pillow blocks
- 61. Change the oil in the drive axle
- 62. Changing the oil in the axle reduction gear
- 63. Change the oil in the wheel hubs
- 64. Change the oil in the drum reduction gear
- 65. Change the oil in the vibration bearings
- 66. Tightening the fastening of the axle on the frame
- 67. Tighten the wheel nuts
- 68. Check the ROPS
- 69. Cleaning the oil bath air filter
- 70. Changing hydraulic oil and breather filter
- 71. Changing the hydraulic oil filter
- 72. Change the coolant
- 73. Replacing the crank case pressure ventilation valve
- 74. Service the combustion air filter
- 75. Adjust the scrapers
- 76. Adjust the parking brake
- 77. Change the tires
- 78. Change the fresh air filter in the cabin
- 79. Tightening torques
- 80. Engine conservation
- 81. General notes
- 82. Reading out faults BVC/ BTM05
- 83. Engine problems
- 84. Preparations
- 85. Cabin assembly
- 86. Final function tests and checks
There are no reviews yet.